ca18, sr20, RB, KA, random parts goodness

[carcrzy920]

name: Daniel
location: viriginia
contact: PM or text 540-903-4022

tired of my shed and room being clustered up with stuff im not using so heres what i got, if your going to flake please dont waste my time because im really sick of people flaking out lately.

ka24de auto (http://zilvia.net/f/#) ecu #25-$30

rb20 ignitor-$35

j30 front calipers, brackets-$60

x3 j30/z32 ignitors-$25 each

q45 ignitor-$25

ka24e distributor, cap, and rotor-$30

ka24de alt-$30

ka24de coil-$25

x2 oem sr20det O2 houseing (good for a budget t25 setup)-$15 each

oem s13 suspension-$25 pick up

s13 ka24de oem header-$5 pick up

s13 hatch oem taillights-$35

s13 SR blue valve cover-$60

ca18det stripped valve covers-$45

s13 KA24de valve cover stripped-$35

s14 ka24de valve cover white with splater paint-$35

r32 skyline crossmember-$70

s14 oem tension rods-$30

ca18det oem turbo manifold-$40

new KA top timing chain tensioner-$25

s14 ka24de distributor-$45

S13 coupe (http://zilvia.net/f/#) sunroof glass with latch-$50

s13 SR cam angle sensor(plastic cover cracked and plug clastic surounding cracked but still works fine)-$65

r32 powersteering resevior-$25

x2 g70 s14 ka mafs-$40

93 s13 ka24de #28 5 speed ecu-$30

2 s13 SR coilpacks-$30 each

s13 single cam ka mafs-$20

s13 SR fuel (http://zilvia.net/f/#) rail (no injectors)-$20

s13 ka fuel rail with injectors-$40

s14 bumper parking lights (new)-$30

450cc top feed injectors-$130

ca18det t25 wastegate-$20

s13 SR20 water neck-$40

s14 steering wheel airbag-$50

s14 rear seat belts-$50

s13 sr oem exedy pressure plate-$30

ka24de oem exedy clutch disk with lots of life-$20

s13 front OEM calipers with OEM lines-$30

SR steel hot pipe with hks flange welded on-$55

SR alluminum hot pipe-$40

s14 mint mudflaps, just could use paint-$50

HKS bov flange only, never used-$10

apexi avc-r boost controller(just the main unit, needs boost selunoid and wire harness. only like $180 through apexi)-$60

thats about all i can think of right now, i got some other random parts too just ask me and ill take a look at what i got.
sorry for the shitty cell pics

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc6/196341_151709738223387_100001530850326_327067_1015 039_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/196341_151709741556720_100001530850326_327068_7545 682_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/196341_151709744890053_100001530850326_327069_5698 472_n.jpg

[carcrzy920]

night time bumpedy

[jdmchuckiwill]

how much for valve cover shipped to 37087
and is it in good condition.
are the coil pack and coil cover screw holes in good condition.

[rb20240sx]

Can you do the right s14 side marker for $15?

[carcrzy920]

bump it on up for the second time

[JDS Performance]

WTB; S13 SR20DET Redtop Various Parts Needed

I am putting a SR back to totally stock for my upcoming video series - my donor motor is missing quite a bit.

Water Neck
It is the neck in front that hooks to the bottom radiator hose
If you have the mounting bolts too that would be awsome!

I also need the alternator belt tensioner setup - I have the bracket but not bolts/nuts/washers
I need the (3) bolts that bolt the power steering bracket to the block - I have the one in front
I need the (4) bolts & small plastic isolators that go under them to bolt down the fuel rail
I need the (4) water pump pulley nuts

I also need the fuel hardline that monts to the rear of the fuel rail - I also need that rubber line and clamps to attach it as well as the bolt that bolts it to the intake manifold torwards the front

I need the (2) turbo inlet pipe nuts/washers as well as the (3) bolts/washers for the turbo outlet pipe T25 turbo.
I also need (3) turbo banjo bolts and crush washers for them.

I need the stock catch can "black box" and mounting bolts and hose.

I need the A/C bracket with mounting bolts

Pix/prices shipped to Concord,NC 280825

[email protected]
__________________