PDA

View Full Version : cluster lights dont work!!


S13RB25DETDRIFTER
03-13-2011, 07:10 PM
ok i check all of the connections on the back of the cluster they all have power but still no lights it just went out of nowhere i have a HUD i change the white box already nothing happen i connect the red/yellow cable behind the stereo nothing still change the dome light adjuster nothing still WTF so i kinda need help on this it was working good and then it just gave out :wtf:

ceniack
03-13-2011, 09:53 PM
this may sound dumb, but did you check your fuses? not just the ones by your foot on the driver side, but the ones under the hood. i can't remember which fuse it is but i remember one weird one also making your cluster lights go out.

S13RB25DETDRIFTER
03-13-2011, 11:07 PM
no i havent check the ones under hood

Schassis707
03-13-2011, 11:56 PM
my buddys car did the same, it was his actual cluster harness. it had a short and one part of the connector was broken

S13RB25DETDRIFTER
03-14-2011, 12:20 AM
i notice i dont have ground on the HUD but i need to get a diagram and i cant find none

Schassis707
03-14-2011, 12:26 AM
Index of /FSM/240sx (http://www.nicoclub.com/FSM/240sx/)

have fun :)

if you need another hud harness, lmk i have one

volcomprodigy02
03-15-2011, 05:15 PM
i recently had the a similar problem my cluster worked but wouldn't light up, i checked everything i had power to the cluster, i tried a different cluster and still no go, i then checked out the little white box by to interior fuse block, take the circuit board out and inspect the board, the ribbon on the board burn out in a small section, you solder a small wire from the begining of the burnt out spot to where it ends (working as a bypass or jumper) reinstall and enjoy,i hope this helps