SSR MS1 18x9+11/18x10+11 5x114.3

[Russ]

I hate to do this but I'm being forced to sell some of my wheels. So up for sale is a set of SSRs. These are fairly rare because everyone and their brother seems to have the SP1s and not the MS1s. These are perfect fitment for an s14. We all know you can fit much bigger wheels than this on an s14, but if youre trying to run a realistic amount or F/R camber (and not buy tires every 2 months) than these are for you.

Model: SSR Professor MS1
PCD: 5x114.3
Finish: SBC-Super Black Coat
Sizes: Front 18x9 +11 / 84mm lip
Rim says Lo Disk but SSR sizing chart says Normal Disk

Rear 18x10 +11 / 110mm lip
Super Lo Disk
Price: $2500 shipped

I bought the front two rims from Up Garage. Then I moved to Georgia before I could find a matching rear pair, so I just bit the bullet and bought the rear set BRAND NEW from MVP Motorsports. The fronts are used and in good condition. On the fronts, there is no visible curb rash and the only marks are on the lug holes where the lugnuts have been mounted. The only problem i could find with them was on one lip. It looks like during shipping one of the lips might have been *SLIGHTLY* warped. It looks to be about 1" long. It very difficult to see. I looked at them half a dozen times before i even noticed anything. When I bought the wheels, they had tired on them and they held air and rolled fine. Its very minor and should not affect anything. I took a pic for everyone to judje for themselves. The rears are BNIB, never been mounted. Havent even mounted the valve stems yet, so obviously, they are perfect. I'm not too sure about BBK clearance, The fronts cleared my s14 brakes with no problem, however, they are stock single piston brakes and not z32/r32 4 piston style brakes. I dont know if they will clear them. Also, the sticker on the rim says "LO" for low disk but after viewing the SSR's sizing chart, the only wheel the matches these specs are the "NR" or Normal disk. Normal disk is has the same lip, width and offset as the ones I have. I dont know why they say LO on them when to me they are seemingly Normal disks.

Pics
http://i13.photobucket.com/albums/a273/mazda_drifter7/DSC00707.jpg

FRONT 1
http://i13.photobucket.com/albums/a273/mazda_drifter7/DSC00708.jpg

FRONT 2
http://i13.photobucket.com/albums/a273/mazda_drifter7/DSC00709.jpg

REAR 1
http://i13.photobucket.com/albums/a273/mazda_drifter7/DSC00710.jpg

REAR 2
http://i13.photobucket.com/albums/a273/mazda_drifter7/DSC00711.jpg

Rear valve stems, hub rings and SUPER JDM STICKERS!!!!
http://i13.photobucket.com/albums/a273/mazda_drifter7/DSC00712.jpg

FRONT LIP
http://i13.photobucket.com/albums/a273/mazda_drifter7/DSC00714.jpg

REAR LIP
http://i13.photobucket.com/albums/a273/mazda_drifter7/DSC00713.jpg

FRONT SIZE
http://i13.photobucket.com/albums/a273/mazda_drifter7/DSC00717.jpg

REAR SIZE
http://i13.photobucket.com/albums/a273/mazda_drifter7/DSC00718.jpg

1" WARP
http://i13.photobucket.com/albums/a273/mazda_drifter7/DSC00721.jpg

http://i13.photobucket.com/albums/a273/mazda_drifter7/DSC00706.jpg

http://i13.photobucket.com/albums/a273/mazda_drifter7/DSC00719.jpg


PM me or email: [email protected]

[projectslider]

shoot me a pm with price shipped to zip00926!!
thanks

[1gr8bar10der]

Free bump for my most favorite SSR's.

[hks4life]

how much picked up

[holemilk00]

I want these badly, but I need to know they clear Z32 brakes.

[Russ]

$2200 picked up...obo.

Gonna try to find someone local today with Nissan 4 pot brakes for a test fit.

[holemilk00]

Do that, snap a few quick pics, and let me know, we can make this happen.

[Russ]

BUMP

Lots of offers but not really any reasonable ones
ProTip: Don't knock $500 off my asking price then ask for free shipping to Indonesia.

Also, still trying to find someone local w/ a BBK. Will update as soon as I know something.

[dawagarage]

zomg!!! yummm

[NA&CH]

I would love these on my ppw z33. Love this rim.

Good luck.

Chris

[sw20>>s14]

I want these badly, but I need to know they clear Z32 brakes.

+1...i would be VERY interested as well if you can give a more accurate guess...

pics of rear pads for fronts?

[Russ]

Some rear disk clearance pics.

Found a local guy w/ some 300zx brakes. Having trouble reaching him though.

http://i13.photobucket.com/albums/a273/mazda_drifter7/DSC00723.jpg
http://i13.photobucket.com/albums/a273/mazda_drifter7/DSC00724.jpg
http://i13.photobucket.com/albums/a273/mazda_drifter7/DSC00725.jpg
http://i13.photobucket.com/albums/a273/mazda_drifter7/DSC00730.jpg

[sw20>>s14]

Some rear disk clearance pics.

Found a local guy w/ some 300zx brakes. Having trouble reaching him though.



thanks...i dont think there is any way in hell my 30mms will fit under there, let alone a BBK...

let me know if they do though!

[gswilliz]

not tring to be cheap, all i got right now, but if ud take 2,000 shiped ill take them like right now

[5staralex]

great wheels and price. glws

[Russ]

*UPDATE*

Found someone with a z32 that would let me test fit these wheels.
Bad News:
The fronts will not clear z32 calipers
Good news:
If you need it, I will include a brand new set of 8mm slip-on spacers to clear the brakes.
But wait...THERES MOAR!!!
You're obiously going to need extended wheel studs to have the thread on the stud to safely run these spacers. So I'll throw in new/never used extended studs.

clearance with 8mm spacers
http://i13.photobucket.com/albums/a273/mazda_drifter7/br.jpg
http://i13.photobucket.com/albums/a273/mazda_drifter7/br1.jpg
http://i13.photobucket.com/albums/a273/mazda_drifter7/br2.jpg

BONUS FREE SHIZ INCLUDED:
http://i13.photobucket.com/albums/a273/mazda_drifter7/studssss.jpg

Its hard to see but theres abount an 1/8" of clearance between the caliper and the rim. All i had to take pics was my phone, so sorry for the blurryness

[sw20>>s14]

UUUUUUUUGH...so with 8mm sammiches, it has about 1/8" or about 3 mms clearance...im wondering if 5mm will do it...itll probably be sitting on the letters with 5s...im Seriously considering swapping my z32s for q45s just to run these...just curious, brand of ext studs?

[JoeCrappa]

ZIP sent to PM

[holemilk00]

Damn man, sorry but I'm out on the deal. Trying not to run spacers.

[Russ]

i bought the studs from enjuku a while ago. I could have sworn they Nismo, but when i pulled them out and checked them, they were not in the typical Nismo box that they sell their extended studs in. They were just in a shipping bag. So they are probably Circuit Sports lugs because I dont see any other brands for sale on their website.

[JoeCrappa]

Pending sale?

[Russ]

fo sho

hreen beer

[GeneStarWindGSW]

shot ya an PM offer

[Mister.E]

bump for Russ, my boy from back in the day. GLWS man!

[domo09]

bump clean rims.....glws

[Fatlace]

emailed ya.

[JoeCrappa]

These are SOLD...to me :squintd:

[Russ]

Sold to Joe.

Done deal