sr20det maf wiring

[vladimir240]

hey guys i've been trying to find out whats causing my misfire at idle and low rpm+ occasional backfire:rl:.... i found out a couple things off which i could fix. but now im down to this...

the white wire coming to the maf thats supposed to have 5V is reading 0.

does someone know off the back where that wire goes is to? im sure its the ecu but if someone is knowledgeable enough to point me as to excatly where?

thanks in advance

sr20det redtop in 92 '40
other 2 wired check good for ground and 12v

[KiLLeR2001]

Black w/ white stripe is... 12V+ ignition on.
Black is ground wire to body chassis.
White is ground signal that goes to ECU.

[vladimir240]

any idea where on the ecu exactly? i think my next step is to check that(5v white) wire for continuity right where it comes into the ecu. and yes the black wire is good(ground) , and white and black wire is good too(12v).

[Sileighty_85]

are you checking the white wire with it still connected to the MAFS?

If not you need to

[vladimir240]

well guys i found out that its pins 16 for maf input white wire which is 5v
and pin 17 is the maf sensor ground black, just googled the ecu pin maf.
regardless thanks killer2001

[vladimir240]

Sileighty_85 (http://zilvia.net/f/members/sileighty_85.html) : (http://zilvia.net/f/members/sileighty_85.html)
yeah no i had it off, k i'll try to plug it and do it that way in the morning. i was doing it from someone's how to guide which wasnt too clear i guess. but thanks, hopefully it'll read good and i'll be back to square one