norcalslider
03-09-2011, 03:51 PM
I just replaced my plugs with BKR6EIX from BKR7EIX Stock2667 and have read that they are just drop in since there pre gapped at .30 but that wasnt the case they where .40 so i gapped them to .30 and im getting alot of motor movement now and my valve cover seems to be hotter then before..should i re-gap them higher or lower or should i go back to 7's i read that 7's should be ran only if your boosting more then 7psi and im pushing 12psi.......oh and since i put these new plugs in my gas gauge is reading almost empty for some reason but idk...
Thx for reading.
Thx for reading.