View Full Version : CA Blitz type03 18x9/10 +? 18x10/11 +? 5x114.3 sorry not sure of size
RPSil13
03-01-2011, 09:22 PM
got some blitz type 03
****got a pm saying they are 18x9 +50 (+20 w/ spacer) and 18x10 +10, im thinking if you swap faces it'll prob be a +25ish
__________________
tires
front; 235/40 goodyear/potenza
rear; 245/45 nankang
asking 1200
recently polished came out pretty nice
im not sure what the size is b/c from my understating youre supposed to measure from the inside of the lip??
if anyone can help me figure out the size and offset, would be greatly appreciated
also i think when the faces were poweder coated the fronts were switched w/ the rears either on accident or purpose but the end result is some nice low offset rears and some super high offest fronts, so i will include 1.25in/30mm spacers, only thing is theyre 12x1.5 *toyota thread, will include lug nuts
pics
all
http://i79.photobucket.com/albums/j135/immetallica138/parts%202011/DSCF0492.jpg
Front face
http://i79.photobucket.com/albums/j135/immetallica138/parts%202011/DSCF0494.jpg
http://i79.photobucket.com/albums/j135/immetallica138/parts%202011/DSCF0493.jpg
Front width
http://i79.photobucket.com/albums/j135/immetallica138/parts%202011/DSCF0496.jpg
front offset
http://i79.photobucket.com/albums/j135/immetallica138/parts%202011/DSCF0497.jpg
Front backside
http://i79.photobucket.com/albums/j135/immetallica138/parts%202011/DSCF0495.jpg
rears
http://i79.photobucket.com/albums/j135/immetallica138/parts%202011/DSCF0499.jpg
http://i79.photobucket.com/albums/j135/immetallica138/parts%202011/DSCF0498.jpg
Rear lip size 4in
http://i79.photobucket.com/albums/j135/immetallica138/parts%202011/DSCF0500.jpg
Rear width
http://i79.photobucket.com/albums/j135/immetallica138/parts%202011/DSCF0501.jpg
Rear offset
http://i79.photobucket.com/albums/j135/immetallica138/parts%202011/DSCF0502.jpg
spacers
http://i79.photobucket.com/albums/j135/immetallica138/parts%202011/DSCF0490.jpg
BlueKpS13
03-02-2011, 01:17 AM
Check the inside of the spokes. The numbers for the sizing should be there.
da_crew10
03-02-2011, 08:23 AM
Price shipped to 72956?
All center caps included?
And also please try and figure out the specs, reallyn interested cash in hand.
5t341tH
03-02-2011, 10:37 AM
where are u measuring from? should be at the hub to the straightedge to get backspace
RPSil13
03-02-2011, 01:20 PM
Check the inside of the spokes. The numbers for the sizing should be there.
i did, but cant read it b/c it was powder coated over
Price shipped to 72956?
All center caps included?
And also please try and figure out the specs, reallyn interested cash in hand.
pm'd you
only 2 center caps :(
where are u measuring from? should be at the hub to the straightedge to get backspace
yeah, i did that for the offset. butdont know the width b/c i remember that youre supposed to measure the width from the inside of the lip
****got a pm saying they are 18x9 +50 (+20 w/ spacer) and 18x10 +10, im thinking if you swap faces it'll prob be a +25ish
wh0aitznic0
03-02-2011, 02:15 PM
^They never came in 18x10 +10.
Mitsubayati
03-02-2011, 04:12 PM
how much for just the spacers shipped to 94579?
icedsole
03-02-2011, 04:13 PM
offsets that came in 18x10 were
+22, +28, +35, +45, and +51
RPSil13
03-03-2011, 09:50 PM
^They never came in 18x10 +10.
^^please learn to read, see below
how much for just the spacers shipped to 94579?
sorry, not selling spacers separately at this time
offsets that came in 18x10 were
+22, +28, +35, +45, and +51
^^please learn to read, see below
i think when the faces were powder coated the fronts were switched w/ the rears either on accident or purpose but the end result is some nice low offset rears and some super high offest fronts
Csomme
03-04-2011, 04:37 PM
I don't know why these haven't been sold yet. I wish someone would buy my wheels so I could pick them up. GLWS
RPSil13
03-05-2011, 11:35 PM
I don't know why these haven't been sold yet. I wish someone would buy my wheels so I could pick them up. GLWS
that makes 2 of us lol
ive been getting a lot of pms on just the rears, should i swap the faces back and make both of them had ok offsets>?>???
towlie
03-06-2011, 12:12 AM
PM'd
Ughfcknmsg
RPSil13
03-06-2011, 07:41 PM
PM'd
Ughfcknmsg
replied
all pm's replied,
NOT SPLITTING REARS, will prob just swap faces and relist
lflkajfj12123
03-06-2011, 11:06 PM
lame
gearheadvr4
03-08-2011, 07:24 AM
I want these rims. I have a set already but one was severely ruined by a driver that side swiped my car.
Really only need one, but will buy the whole set.
revcyanide
03-08-2011, 07:33 AM
Nice price, but holy crap offset.
let me know if you are willing to let em go for less shipped w/o tires.
I could use the +10's as spares. sell the subarau offset ones around here easily.
i'll pm ya too.
RPSil13
03-08-2011, 10:13 AM
Nice price, but holy crap offset.
let me know if you are willing to let em go for less shipped w/o tires.
I could use the +10's as spares. sell the subarau offset ones around here easily.
i'll pm ya too.
tried pm'ing you, but your inbox is full, clear some space out
revcyanide
03-08-2011, 10:39 AM
fixed
msggggg
the240sxer95
03-08-2011, 05:27 PM
What sizes are the lips. .. Pm me your number
^looks like 4inches all around.
only difference are the mounting plates, if I remember.
RPSil13
03-08-2011, 09:29 PM
What sizes are the lips. .. Pm me your number
^looks like 4inches all around.
only difference are the mounting plates, if I remember.
2in lip in the front
4in lip in the rear
pumablk
03-09-2011, 02:08 PM
If you were to swap the faces, what do you think the front offsets will be? The rears would be 18x10 +25 as stated above, but this is more of a guess, correct?
neil
edit - I am assuming the fronts would be 18x9 +35
the240sxer95
03-10-2011, 01:22 AM
Still interested. Lmk if youll sell w/o tires. Im local
RPSil13
03-10-2011, 02:38 PM
If you were to swap the faces, what do you think the front offsets will be? The rears would be 18x10 +25 as stated above, but this is more of a guess, correct?
neil
edit - I am assuming the fronts would be 18x9 +35
yeah, just a guess, but somewhere around there
Still interested. Lmk if youll sell w/o tires. Im local
dont feel like dismounting tires, pm me an offer,
jspecusa
03-10-2011, 03:24 PM
You are having a hard time selling them because
You are not sure of size and offset.
It's not hard to figure out, just need a card
Board size of the wheel and a ruler that measure
In mm also.
If you still can't figure it out bring the wheels by
I'll measure them for you
RPSil13
03-12-2011, 09:40 PM
You are having a hard time selling them because
You are not sure of size and offset.
It's not hard to figure out, just need a card
Board size of the wheel and a ruler that measure
In mm also.
If you still can't figure it out bring the wheels by
I'll measure them for you
size was figured out, i edited my first post to show that
the240sxer95
03-13-2011, 01:46 AM
Tried to text you.. But didnt get an answer. Lmk when can set a pick up time
RPSil13
03-13-2011, 10:26 AM
Tried to text you.. But didnt get an answer. Lmk when can set a pick up time
you keep asking the same questions, im no longer responding to you
price is the same w/ or w/out tires, for offsets look at the first post
the240sxer95
03-13-2011, 02:55 PM
Well thats pleasent
RPSil13
03-15-2011, 09:26 AM
LAST BUMP
before i swap the faces and relist
thanks
dawagarage
03-15-2011, 10:18 AM
this is a decent price for these, im surprised they havent been swooped up yet
the240sxer95
03-15-2011, 03:51 PM
He wont sell em to me. Haha
RPSil13
03-15-2011, 05:42 PM
He wont sell em to me. Haha
youre not a serious buyer, otherwise you would have picked them up the last few times you said you were ready to pick up asap
stop posting in my threads please,
the240sxer95
03-15-2011, 08:56 PM
Actually. We never discussed a pick up place or time.. And we never talked on the phone to verify anything. Which is why i think its funny.
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.