1995 5 speed swap w/ different tranny vs ecu

[slipandflow]

Im tripping out cause Im having a manual swap being done but i heard the car wont pass CEL with an auto ecu. I believe my car is OBD1 not quite sure but the tranny is OBD2. If worst comes to it, then I will have to swap the ECU to a manual OBD1. Do I have to change anything on the OBD2 tranny? or should I just get OBD2 ecu and engine harness? AHH!! flippin out someone help! Thanks

[GeneralTso]

There is no difference between an "OBD1" and "OBD2" transmission. if its an s14 it has a CAS attached to the top of the bellhousing, which means from 1995-1998 the transmissions are the same. You're probably still gonna throw a CEL because of the auto ecu. all you need is an OBD1 s14 manual ecu and it should solve all your problems. the car will still run fine either way.

[tinys s14]

yea the auto ecu will throw a cel and you wont have cold start but it will drive fine... you can just get a 5 spd ecu if you want

[slipandflow]

Alright thanks guys!