Chaser 1JZGTE Motorset, Single Turbo Parts, 240sx Mount Kit

[Captain Dan]

For sale is my low mileage 1JZ motorset which I was originally planning on swapping into my pro am project. I bought the motorset, mount kit, and driveshaft from zerolift autolab in July of 2010. I did a dry leak down test on the engine after receiving it (zerolift also does this before they sell an engine) which ended up being between 8 and 12 percent depending on the cylinder.

I have already replaced the waterpump with a 2jz pump, new timing belt, and tensioner. I purchased an oem toyota 1jz full engine gasket kit, and have already installed the new front main and cam seals, and valve cover gaskets. The rest of the gasket kit will be included with the sale of the motorset. I have also re-surfaced the flywheel.

Here's the list of stuff Ive got:

-Low Mileage 1JZ out of a Chaser (front sump oil pan), missing factory turbos.
-Extended Shifter R154 transmission.
-Complete upper and lower 1JZ harnesses, and stock KA24DE engine harness.
-Stock ECU

-Zerolift 1JZ/2JZ -> 240sx Mount Kit (driveshaft is also paid for and included, but new owner must call in with a measurement before its made and shipped)

-Garrett TO4S twin scroll T4 60-1 .70A/R w/ 3" vband dp flange.
-Kinsler Fuel Rail (custom "for my application")
-Bosch 650cc low impedance injectors (will need resistors)
-Generic/Godspeed T4 turbo manifold.




Pics:
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash2/45099_1381556584228_1391340178_30920413_3271971_n. jpg

http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc4/60205_1423289107515_1391340178_31014642_812666_n.j pg

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash2/33650_1423290187542_1391340178_31014644_6358800_n. jpg

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash2/34798_1818272856044_1216810236_2112306_8113238_n.j pg

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash2/39666_1374305482955_1391340178_30901964_5634690_n. jpg

Asking Price: 4,000 for all parts listed. I have over 5,000 invested, and all parts still have zero miles on them. I will also take 3,000 without the turbo, manifold, and fuel setup.

I also am selling my ProAm/XDC compliant caged s13 shell with some goodies, I can do a package deal for the shell and the motorset for 6,900.


Link to Shell FS thread: http://zilvia.net/f/sale-items/368873-caged-s13-shell-w-goodies.html#post3890369

Contact:

IF YOU WANT A TIMELY RESPONSE, DO NOT PM ME. The fastest way to get in touch with me is via phone.

Located in Charlotte, NC.

Dan Grant
704-910-9144

[Captain Dan]

bump number 1.

entertaining most offers, got alot of intrest so far.

ill sell the motorset without mount kit and driveshaft for 2100.

[jdm2191]

im interested in the mount kit....

[redline240sx]

PMed you sir!!

[titangts]

bump for a good friend..100% legit seller, everything is so fresh on this. I've seen it multiple times. good guy here!!

man up and get away from Ka's!! this is just a tad bit more than a sr...and well..a ton better.

[Captain Dan]

Ive got a ton of PMs asking me to price specific parts so here:

1jz motor, trans, harnesses, ecu - 2000
mount kit - 700
turbo - 800
manifold - 150
fuel rail and injectors - 625

[Captain Dan]

2nd bump...

taking cash offers, im ready to move on from this project.

[Zed28]

PM'd about parts

[hopefull]

part out the trans?????

[nxt774]

pm me your no haggle price for the mount kit and DS.

[Captain Dan]

SOLD everything as a package. thanks for the interest.