PDA

View Full Version : FL **********FS: tons of s14 parts, z32 brakes, ka-t parts, misc stuff***********


ka-titties
02-19-2011, 08:58 PM
Almost all of the prices below are flexible and are OBO.

None of the prices include shipping or paypal fee's. both will have to be added on.
PayPal fee calculator: http://www.rolbe.com/paypal.htm

I accept PayPal and cash.

PayPal email: [email protected]

Phone: 386-214-1888

Holset HX35 with the 7 blade compressor wheel: $400
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1178.jpg

http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1180.jpg

boost designs KA-T top mount turbo manifold. t3 flange, rewelded wastegate flange to stop the boost spike problem: SOLD

downpipe with flex section. fits s14's with the holset and boost designs manifold: $100
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1187.jpg

walboro pump, install kit, and s14 mounting arm: SOLD

DELPHI 75# Top feed injectors with pigtails and top mount rail for KA, RAIL SOLD: $300
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1171.jpg

3 N62 Z32 maf sensors. all have pigtails: $100 each ONE SOLD. 2 LEFT
z32 mafs pigtail: $10
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1170.jpg

SR injectors, no o-rings: $50
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1192.jpg

KA short block. new piston rings, new ACL rod and main bearings. new water pump: $150
Alternator: $20
oil pan with bung welded in for turbo oil return: $50
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1141.jpg

http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1140.jpg

Sparco Pro 2000's with sparco sliders and mounts: $1100
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1177.jpg

http://i16.photobucket.com/albums/b12/dimitri24/96%20S14%20Build%20Pictures/100_1132.jpg


5 bolt J30 VLSD: $150
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1184.jpg

Greddy full auto turbo timer. has double sided tape on it in the pic. can remove it.: SOLD
TXS Knock light: SOLD

OEM G35 brake disks brembo equipped and JSK brackets so Z brakes fit over them: SOLD

30mm Z32 brakes: SOLD

Manual boost controller. works excellent: SOLD

3 bottles of Amsoil sever gear 75w90 gear oil: $20
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1202.jpg

s14 manual drive shaft $30 FRONT HALF SOLD
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1191.jpg

XM radio antenna: $15
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1186.jpg

KA Starter: $50
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1185.jpg

s14 hood prop: $10

s14 door. has waves in the metal: $20
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1175.jpg

s14 B and C pillar plastics: $20
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1174.jpg

s14 rear deck/speaker cover: $10
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1198.jpg

unexploded passenger s14 air bag: $50
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1197.jpg

fuse box cover. pretty good condition: $15
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1167.jpg

s14 e-brake cables: $15
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1166.jpg

KA complete intake manifold: $30
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1164.jpg

s14 front and rear seat belts: SOLD

s14 evac shit: $40 for both
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1162.jpg

s14 OEM rear sway bar: $40
little fan: $25
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1160.jpg

s14 front seats: $150
drivers side:
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1158.jpg


cut and planed s14 intake manifold flange: $20
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1157.jpg

s14 cup holder box to go under your radio: SOLD

passenger side window switch and handle: $15
wiper and non se light stalk: $10 each
dash light thing: $5
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1155.jpg

s14 grill: $20
s14 window amps: $45 each ONE SOLD
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1154.jpg

random s14 shit, make an offer. INTAKE SNORKEL SOLD
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1153.jpg

PS pump: SOLD
s14 tension rods with ES poly inserts: $40
KA timing cover: $10
lower timing cover: $20
s14 distributor: SOLD
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1152.jpg

oem A/C fan s14: $10
working antenna motor: $10
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1151.jpg

OEM KA crank pulley: $15
Aluminum KA crank pully: $40
Front cover: $10
distributor: $30
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1149.jpg

s14 KA valve covers: $30 each GREEN ONE SOLD
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1148.jpg

brand new KA s14 TPS: $35
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1146.jpg

KA oil pans: $15 each ONE SOLD
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1144.jpg

Lower intake manifold section, complete: $20
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1143.jpg

nintendo Wii. all accessories in the box. the Wii itself is not working but everything else in the box is brand new and in original packaging: $60
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1190.jpg

xbox 360 cases: $10 each
http://i16.photobucket.com/albums/b12/dimitri24/For%20Sale%20Items/100_1188.jpg

smokin18
02-19-2011, 09:42 PM
might b interested n the short block and the polished vc and the green vc

Napalm
02-19-2011, 09:53 PM
10 shipped for a coolant temp sensor mini harness? Pm me if interested, paypal ready.

ka-titties
02-19-2011, 10:42 PM
are you talking about the pig tail for just the coolant temp sensor?

yvang07
02-19-2011, 11:05 PM
Hey I'm semi interested in the VLSD, is it from a 95/96 would it bolt up directly to my 96 S14?

JRwerks
02-19-2011, 11:24 PM
still have the green s14 valve cover and how much?

Napalm
02-20-2011, 06:12 AM
Pigtail pleasseee

Napalm
02-20-2011, 09:06 AM
up up uppp

nismo_s14
02-20-2011, 09:44 AM
Hey would you happen to have the steering wheel and the side marker light connector?

tims05
02-20-2011, 11:06 AM
$25 shipped for this part????

WholeGrainS13
02-20-2011, 11:11 AM
Willing to sell just the front seatbelts? Pm me a price shipped to 70343 if you are.

ka-titties
02-20-2011, 11:51 AM
Hey I'm semi interested in the VLSD, is it from a 95/96 would it bolt up directly to my 96 S14?
yes it will bolt up to your rear subframe with no modification. you will need to get 5 bolt axles from a J30 Infiniti though.
still have the green s14 valve cover and how much?
its pending sale ATM
Pigtail pleasseee
let me see if i have that piece. i'm pretty sure its connected to the main engine harness itself. if thats the case, i dont have it.
Hey would you happen to have the steering wheel and the side marker light connector?
i dont have either of these, sorry.
$25 shipped for this part????
to where?
Willing to sell just the front seatbelts? Pm me a price shipped to 70343 if you are.
ill sell just the fronts. PM you in a minute.

tims05
02-20-2011, 12:14 PM
07063 in NJ

Lilchriskid87
02-20-2011, 03:16 PM
Hey how much for the s14 drive shaft shipped to 92557? Pm me for price $

ka-titties
02-20-2011, 03:20 PM
3 people want the driveshaft right now. whoever gives me the highest offer gets it.

same goes with the green valve cover. whoever gives me the highest offer gets it. best offer right now is $40 not including shipping and fees.

TheClutchKicker
02-20-2011, 03:47 PM
PM you about the valve cover let me know.

fairlady_z
02-21-2011, 03:46 AM
are all 3 n62 MAF's in good condition with no holes on the screens? PM best price for all 3 if they are all nice and clean. zip 94306

ka-titties
02-21-2011, 02:33 PM
all are in good condition. $300 shipped + fee's for all 3

Bushido
02-21-2011, 08:28 PM
oil pan shipped to 32605?

is it tapped for oil return?

NissanEnthus
02-21-2011, 09:28 PM
Gray/silver s14 valve cover shipped to 92683 pm me your paypal

ka-titties
02-21-2011, 09:49 PM
i need to find a box that will fit it.

also, parts list updated....

namawon
02-21-2011, 10:32 PM
pics of passenger seat also? interested in the set

ka-titties
02-21-2011, 10:51 PM
i think i have some somewhere on the interwebz. lemme look.

only one i can find right now.

http://i16.photobucket.com/albums/b12/dimitri24/96%20S14%20Build%20Pictures/100_1132.jpg

namawon
02-21-2011, 11:08 PM
How much for the driver and passenger shipped to 34982? They both fully work I assume?

ka-titties
02-21-2011, 11:10 PM
shipping is not going to be cheap. unless you want me to put them in a grey hound bus or something. and yes, they both work flawlessly.

psgiglio
02-21-2011, 11:13 PM
interested in the rear deck/speaker cover and the cup holder

namawon
02-21-2011, 11:19 PM
its all good. hit me up with a price, im looking around for new seats.

Too_Short
02-22-2011, 01:40 AM
Does cup holder get in way of the shifter? If not I wants if still available

ka-titties
02-22-2011, 04:50 AM
interested in the rear deck/speaker cover and the cup holder
rear deck is pending sale. trying to get a shipping quote for it but i cant find a box it will fit in.
its all good. hit me up with a price, im looking around for new seats.
ok, ill see what the options are.
Does cup holder get in way of the shifter? If not I wants if still available
yeah it does

psgiglio
02-22-2011, 06:11 AM
ok if the pending request for the rear speaker cover falls through im very interested and i live in 11735

CherryNova
02-27-2011, 09:09 PM
will you ship a maf to south fl for me? 34116

ka-titties
02-28-2011, 08:56 AM
ok if the pending request for the rear speaker cover falls through im very interested and i live in 11735
I still need to find a box it will fit in. It's pretty large.
will you ship a maf to south fl for me? 34116

Yeah I'll ship one to south fl. Send $110 to my paypal.

CherryNova
02-28-2011, 02:13 PM
Yeah I'll ship one to south fl. Send $110 to my paypal.[/QUOTE]


Sending payment now. Thank you!

ka-titties
02-28-2011, 02:37 PM
going to mail it now...

acheron
03-08-2011, 10:25 PM
ka oil pan still available for sale ?

ka-titties
03-08-2011, 11:47 PM
yeah i still have one.

shevinkool
03-09-2011, 01:52 AM
if any one is looking for a front section of a drive shaft,
i have the front 5speed section for s14 non abs.

acheron
03-09-2011, 06:23 PM
how much for the oil pan shipped to 19382? thnks

eSThurTeen
03-09-2011, 07:07 PM
would you sell just sliders and mounts>??

espa.s13
03-09-2011, 10:22 PM
Pm.sent....

murrr!
03-09-2011, 10:40 PM
ill take the zbrakes

ka-titties
03-09-2011, 11:01 PM
I will not separate the mounts and sliders from the seats.

Oil pan will be $33 shipped.

Z brakes are $185 shipped.

eSThurTeen
03-09-2011, 11:24 PM
Let me know if you change your mind

acheron
03-10-2011, 07:40 AM
do you have any pics of the oil pan? does it have any dings or dents?

ka-titties
03-10-2011, 08:30 AM
All I have is the one in the thread right now. I'm out of town for spring break until Sunday.

acheron
03-12-2011, 04:41 AM
im interested in the oil pan, let me know when you get back and ready to do some business, thanks.

aceof07
03-12-2011, 10:37 AM
Give me your beat price on the lower front cover (is it for a s14 ka?) and the aluminum crank pulley shipped to 28314. thanks!

h240sx
03-12-2011, 11:41 AM
i call bullshit on selling the MAFs and pigtails separate.

ka-titties
03-12-2011, 12:57 PM
Huh? I'm selling the mafs with the pigtails. I just have one extra pigtail that I'm selling separately. Chill out.

bad dog
03-12-2011, 02:46 PM
hi , is the crank pully a 3 drives --ac--ps--alt , and how much to ship to 85257 phoenix area , thanks

aceof07
03-13-2011, 12:45 PM
Give me your best price on the lower front cover (is it for a s14 ka?) and the aluminum crank pulley shipped to 28314. thanks!
trying again....

ka-titties
03-13-2011, 02:22 PM
my bad.

shipping and paypal is gonna come out to $77.00

blackoutt
03-14-2011, 12:41 PM
Sh*t man you got a lot of sh*t. The search returned this thread as a result for "motor mounts" but I didn't see any, am I blind? I'm looking for stock or nismo motor and tranny mounts.

ka-titties
03-14-2011, 03:25 PM
nope, no motor mounts.

ka-titties
03-18-2011, 01:07 PM
stuff updated

acheron
03-19-2011, 05:17 PM
sorry i didnt get back to you but my internet got cut off bc my roommate decided to skip on the payments. anyway, im still looking to grab that oil pan from you..

bad dog
03-19-2011, 06:12 PM
looking for the tension adjuster for the ac belt , it has a arm on it that goes thru the idler pulley and a bolt thru it.

drilled and taped mine , ok now,don't need one.

jpbpoway
03-19-2011, 09:05 PM
At the base of the green and red valve covers I see the motor mount brackets, are you selling those? If so plz pm and how much shipped to 92064? Also do you have the brackets that mount the lower intake manifold to the block?

nvm didn't read previous posts, saw you sold engine mounts my bad

ka-titties
03-20-2011, 06:53 PM
The last oil pan I shipped was about 20 bucks for shipping. So just add that to the price.

I'm pretty sure I have one of the ac belt tensioners.

And I'll sell those motor mount brackets. 25 with shipping.

carpetmuncher95
03-20-2011, 08:24 PM
does the ebrake cable some with the bracket that splits them to each wheel? if so would u do $20 shipped to 19004?

blankman1991
03-20-2011, 08:33 PM
hey man how much for those injectors shipped to 13903?

ka-titties
03-20-2011, 09:33 PM
I'll do 30 shipped for the ebrake cables to make it worth my packing it and buying a box for them.

I just sold the injectors.