PDA

View Full Version : sr20 wiring/ground/fp problem


jvega
02-18-2011, 09:17 PM
hello everyone!
im having problems starting my s13 sr.
i bought a brand new harness, wired it up directly to the chassis clips, because i didnt have the Ka harness,
and the fuel pump will not prime.
---
The fuel pump primes ONLY when i *ground the wires by the battery*(black and pink), **but the fuel pump stays on**.


any ideas what it could be?
perhaps bad wiring job
or bad grounds?
any advice is greatly appreciated. thanks!

jvega
02-18-2011, 09:23 PM
i double checked all the grounds and they all seem to be good.
i double checked my wiring job and it seems ok.
The fuel pump stays on when i ground the black/pink stripe fuel pump relay wires.. its wierd

92dagrey
02-19-2011, 10:10 AM
bad relay. or the wires to/from the relay are bad.

cotbu
02-20-2011, 04:23 PM
The ecu is supposed to ground the black and pink wire for the fuel pump relay.
It is to be connected to pin 104 on the ecu.

jvega
02-21-2011, 12:24 PM
do you think this problem is happening because the ECU is not grounded?

Sileighty_85
02-21-2011, 01:40 PM
check this out

http://zilvia.net/f/tech-talk/327189-attenion-pfc-users-w-eccs-problems.html

jvega
02-21-2011, 02:14 PM
check this out

http://zilvia.net/f/tech-talk/327189-attenion-pfc-users-w-eccs-problems.html

Thanks for the info, im gonna give that a try..
btw i bought my engine from Jdm-online. I hope nothings wrong with it. I havent driven or started the motor yet.

JDM Nissan Silvia SR20DET S13 Blacktop *Upgraded* Motor '94-'98 - Sold - JDM Online (http://www.jdm-online.com/sold/jdm-nissan-silvia-sr20det-s13-blacktop-motor-94-107.html)

jvega
02-21-2011, 07:11 PM
*UPDATE*
I managed to get all the clips from a KA harness, and clipped everything in, rewired everything. (sr20 engine harness to chassis harness)
But it still has the same problem...(fuel pump wont prime, unless i ground the black/pink wires, but it stays on)
Bad ECU maybe?

Ekin_s13
02-21-2011, 09:58 PM
try this site SR20DET Swap Engine Harness Wiring Diagram Guide SR SR20 (http://www.frsport.com/SR20DET-Swap-Engine-Harness-Wiring-Diagram-Guide-SR-SR20_t_26.html)

i use this site to wired my new sr harness

jvega
02-21-2011, 10:06 PM
*UPDATE*
Tried my ecu(E5) on my friends sr which also uses the E5 ecu, and it would not start, no fuel pump sound or nothing!
so im asuming my ECU is bad..
Anyone selling a s13 blacktop ecu??

Thank you guys for the help!:wan:

240sx-pat
04-12-2011, 01:35 AM
So How did this go? I'm having the same issue

Slow Poke
04-18-2011, 09:39 AM
Are you sure you have a harness setup for the S13 blacktop ECU?

lok
04-18-2011, 10:35 AM
Did you actually rewire the plugs by the battery tray?

You cant just wire the colors that match together you have to move them around to other pins.

jvega
04-22-2011, 06:42 PM
thanks for all the help guys, but it was the ecu.
the ecu was bad.
something about the fuel pump power was wrong in the ecu.
because my friend uses that ecu on his ae86 but he has everything wired directly.

i bought a new ecu, and now my car drives like a beast.