Dousan, need you help with my clutch again.

[RedlineRacer]

I did as you said an took off the clutch damper. I bent the metal hard line around and skrewed it to the soft line. And in doing so, I lost most of the fluid in my line. Now I can't get my clutch to stiffen up. What am I doing wrong?. Please don't say my master cyl.

[FRpilot]

sounds like you need to rebleed the clutch since you mentioned that some fluid came out. also, some air might have crept in. so just refill and rebleed the clutch and everything should be fine. bleed through the clutch slave cylinder and the one bleeder valve. should be done in less than 5 mins w/ 2 ppl.

[mrmephistopheles]

uhmmmm... no.
PM function, whores!