putting an S14 kouki front on a S13

[daiv makitsu]

I'm looking to put the S14 kouki (97-98) front end on an S13, what problems will I run into other then needing to cut and weld the S14 with the S13 fenders. I've searched this forum but haven't found exact specifics, any help would be great, thanks. just wanting to know how hard to bolt it up to the S13,

Thanks

[FRpilot]

problems? nothing a good shop can't handle if they know their body work. and as for how hard it is to bolt up onto an s13, not really hard because it involves a lot of cutting, bondoing, and welding. good luck! post up some pics when you're done.

[Ricer240sx]

sorry i cant offer any help, but could u do a write up and post pics, lots of pics, before during and after:D thanx

[daiv makitsu]

well thanks, I was basically looking for what i'm getting into before i go buying the parts and starting the conversion, but it seems the only problem is the fenders. Am I right?

[daiv makitsu]

nobody knows the specifics behind this?

[radhaz]

Hello and let me welcome you to Zilvia.net

Here at Zilvia you will find a community of 240sx enthusiast's with a large knowledge-base. In order for you to best use the information here on Zilvia it's highly recommended that you use the http://pfm101.com/images/funny/search.gif function located in the top right.

I think it is safe to say that if you can think of a project and ask the question then someone be it a month ago or two years ago thought up the same question and already asked it and got the answer's.

You can save yourself and everyone else some time and effort by abusing the hell out of the search button in an effort to find the information you need.

Included in this post for you is a free complimentary search which I found by typing in S14 kouki front on a S13 (http://www.zilvia.net/f/showthread.php?s=&threadid=22349&highlight=S14+kouki+front+on+a+S13) (remarkable isn't it?)

Please don't think this post is a http://216.40.249.192/s/otn/blobs/ukliam2.gif as it is merely a chance to guide you in the right direction http://instagiber.net/smiliesdotcom/contrib/ruinkai/smashfreakB.gif rather than let you travel off into the land of flamebait

[240Degrees]

this is sorta off topic but ive seen s14 tail lights on an s13 fastback/180sx and it looked cool. Almost stock-looking. If I ever change my tail lights, that's what I'd do.

[daiv makitsu]

I used the search a bunch but couldn't find anything on it, thats when I put a post up. I'm not lazy and didn't even attempt, i just couldn't find anything.

[240Degrees]

i believe jspec.com sells them. try that.

[BeatJunky]

ROFLMAO!!!:D

Sorry... this has nothing to do with the topic but this avatar kicks ass!!
http://www.zilvia.net/f/avatar.php?userid=1958&dateline=1054712478

[daiv makitsu]

JSPEC.COM ONLY HAS S15 CONVERSION STUFF THAT I'VE EVER SEEN.

[aznpoopy]

this was covered before. i found it in one search. maybe you were just lazy? anyway since i'm so nice, here's the link to the thread:

http://www.zilvia.net/f/showthread.php?s=&threadid=36003&highlight=s14+front+end+s13

if the link doesn't work, search for "s13.5" ... anyway search harder next time.

[Joel 180]

nothing fits up. you need to modify everything or get conversion bits which are rare

[Sil1540sx]

West Yokohma is finishing up their s14a -> s13 conversion. Check the website http://www.h4.dion.ne.jp/~west-y/ . I had to run it through a translator before I realised what the site is about. They are also selling their test-fit car which has the s14a front.

Here is a pic of the car.
http://members.shaw.ca/ericwebber/070303-1.jpg

Eric