Time to Part it Out - S13 Track Car

[zweebach]

Updated 4/22/2011 15:36

The never installed built short block is the primary item left. It is bored out to be a 2.2L motor, with Darton 90mm sleeves Carillo rods, CP pistons).

Prices do not include shipping. Send me an email at [email protected] with your zipcode for total price.

Racing Sparco Wheels with Advan A048 tires (one track day on tires)- $1300
There is a very subtle difference between the dish on the fronts and rears. I did not realize it until later. In the first picture, the two middle wheels are the fronts, and the ones on the ends are the rears.
Fronts: 18x9.5 +22mm offset (Have 9mm hub-centric Spacer)
Rear: 18x9.5 +23mm offset (Have 10 mm hub-centric Spacer)
Included hub-centric spacer makes effective offset of 13mm for both front and rear.
Tire sizes are 265/35R18 for all four.

http://i55.tinypic.com/mbh21h.jpg

http://i53.tinypic.com/o6xmb6.jpg

http://i52.tinypic.com/t0jouo.jpg

http://i54.tinypic.com/15cdh6o.jpg

http://i52.tinypic.com/vdiluu.jpg

http://i54.tinypic.com/2wrp56w.jpg

Built SR20DET short block, 2.2L sleeved, CP Pistons, Carillo Rods - $2500 (even lower price)
Costs approximately $300 to ship.
http://i53.tinypic.com/2ufdf9c.jpg

Ferodo Racing Brake Pads, DS3000 for Stop Tech ST22 caliper - $66
http://i56.tinypic.com/10mnfcx.jpg

http://i51.tinypic.com/1zvbtpg.jpg

Autometer Carbon Fiber Gauge Cup for 2 1/16" Gauge: $25
http://i51.tinypic.com/2mnp4io.jpg

http://i56.tinypic.com/6ej1up.jpg

[Pure_JDM]

Bump for a nicely organized for sale thread. How much, if you don't mind, would you take for the entire setup? PM me. I'm not personally interested in another 240 ATM, but my friend is trying to track down a decent project.

[mocmiranda]

Bump for texas and a nice priced hood

[icantsleeps]

you got PM'd sir

[va240dude]

Nice for sale list man and great prices, you've got a PM from me as well!

[eSThurTeen]

would b interested in whole car... how much??? texas all day

[TheClutchKicker]

How much for the fender flares?

PM me.

[krankanator]

How much for carbon hood shipped to phx az 85035 ? And wat does that lip belong too ?

[zweebach]

Okay, so I've gotten several PM's overnight and a couple of posts. I'm going to do my best to reply to everyone today.

There's been considerable interest in the front lip. It is an authentic original ABS plastic Nissan piece, not a fiberglass replica. Since this is a first come first served kind of deal, I'm going to go by time stamps of the post/pm to determine who has rights to an item.

I will warn you that if someone can come up with the bucks for the whole thing, that is my priority.

I added up the investment (it's a sobering number) and this is amounts to $34K worth of gear, not including the purchase price of the car.

The chassis has 99,622 miles on it right now.
As a negotiating point, I'll start of asking $14,000 for everything.

[i need tires]

I see Z32 front calipers in one of the pics, not sure if they are for sale or not. Please advise

http://i56.tinypic.com/142y92o.jpg

[MrFairlady]

i'll take the front lip.
NOW.

[TriniGT]

Are the injectors and Z32MAF for sale?

[icantsleeps]

how much for the built short block?

[zweebach]

I see Z32 front calipers in one of the pics, not sure if they are for sale or not. Please advise

http://i56.tinypic.com/142y92o.jpg

The Z32 calipers are for sale as well. I think I still have front Z32 rotors as well. How about $100 for calipers and $30 for rotors.

They're heavy, so shipping will be a good bit. PM your shipping zip code and city for a shipping quote.

[zweebach]

Are the injectors and Z32MAF for sale?

I don't have the 740cc injectors - never bought them. I think I still have a Z32 MAF, but I have to find it.

[Imarvin240]

please pm me how much you are looking to get for the 2.2L block and more specs on it (compression ratio, I beam...H beam rods, ect.) thank you

[zweebach]

Okay okay okay, no more PM's on the front lip. There are 9 people who want it and I've replied to all of them, so I think it's pretty certain that at least on of them will come through on it. Thanks for the interest.

[sr84]

How much for the shell??

[M1ndDr1ft]

NOOOOOO!!! THE FRONT LIP GODDAMN!! lol!! are you shipping???? if so how much for the rear valances and sideskirts lmk!

[zweebach]

The built short block has:
90mm Darton sleeves
1/2" ARP head studs
CP Pistons - 9:1 compression ratio
Carillo I-beam rods
ACL main bearings and thrust bearings (calico coated)
Decked front cover level with block, oil groove machined mains
New timing chain with new guidses.

http://i54.tinypic.com/10n5jmg.jpg

http://i53.tinypic.com/29asks7.jpg

http://i51.tinypic.com/ff61s5.jpg

http://i56.tinypic.com/2vm7xh1.jpg

[Adrian_180]

Can i get a closer pic of the short hub and tension rod brace? thanks

[moose63]

Bro hit me up 8324728847 interested in the tails

[sr84]

Hey man I'm really interested in the shell. Have cash in hand.
Hit me up at 806-773-9537

[sftmb]

daamn>_< Just saw your post about the front lip...uggh

[mastaflash05]

sad i missed the lip. youre giving that thing away man.

i am interested in the rear oem bumper and the tail lights though, if you are willing to ship them to me. lmk a price shipped to 45239. thanks.

[Bushido]

interested in the rear solid bushing kit, kouki 3pc rear valence, kouki sideskirts (if you got em) and spl rear arms. can i get a price shipped?

[jester757]

Who built the motor?

PM me if you get a chance. Interested in the motor, turbo setup, and hood...maybe the brakes too if you can make a package deal on these items.

Thanks
Jester757

[tx240ss]

I need the bumper extensions ( the black 8 x 8 piece at the between the wheel well and the front bumper)... shipped to 77345?

[Def]

I'm local to you, interested in a few things. Sent you a PM. Maybe we can work out a package deal.

[nismoracingsx]

interested in the shiftboot/brake boots
shipped to 31419
pm me or [email protected]
you planning on parting any pieces off the besides whats on the list? My sunroof outer gasket and hatch gasket are shot = p

[Propaganda]

ati pulley picks?

[XiaoAZN]

Kouki Tails / Skirts shipped to 98033?

[zweebach]

Who built the motor?

PM me if you get a chance. Interested in the motor, turbo setup, and hood...maybe the brakes too if you can make a package deal on these items.

Thanks
Jester757

Machining was done by Mazworx and was assembled by Rebello Racing (http://www.rebelloracing.com/)

[dleep25]

really interested in the nistune. is it just the chipped ecu or does it come with software and cable? its for sr correct?

[FaLKoN240]

I am interested in the lugnuts and turn signals for the kouki bumper if still available.

[zweebach]

ati pulley picks?

Moved pictures to first post.

[zweebach]

really interested in the nistune. is it just the chipped ecu or does it come with software and cable? its for sr correct?

Nistune is for an SR. I need to keep the software license and cable for my Z32.

[ohhhizzzy]

im interested in the front z32 brakes and the hood. can you pm how much shipped to 53114 thanks

[hOngsterr]

good stuff man.

[dleep25]

can you do 220+shipping for the nistune ecu since there is no license or cable?

[Propaganda]

well.. hook it up for a price to 32257 (the damper)... paypaL?

[markapple0507]

Interested in the spl tension rods. what version are they? pics if you can. and also possibly interested in the gorilla lug nuts if they're not taken. all shipped to 79912 pm please :-)

[nismoracingsx]

You've got paypal for those boots..pm box is full.

[silverarrow27]

Your pm box is full.

When you get a chance, please send me a picture of the undertray. No worries about the Type R.

[zweebach]

Your pm box is full.

When you get a chance, please send me a picture of the undertray. No worries about the Type R.

Okay, so my PM box is full and the forum seems to be really slow with PM's so just email me for stuff:

[email protected]

I'm updating the list everynight, so please check it for information on part availability.

[zweebach]

Z32 MAF and filter = sold

[s13fay92]

Bump for a clean car and clean thread

[hOngsterr]

i dont have interest in any of your stuff anymore,
thanks anyways.

[an_orange_s2k]

emailed ya

[nightsauce]

Emailed you and sent you a PM during the weekend. :)

[bikrman2]

Interested in the clutch and piviot. Can I get a price shipped to 12204?

[nismoninjagtr]

i'm in love with that twin scrollsetup :'( .... glws

[dahveed]

How much for the driverseat+ rail together?? Picked up.

[xharobikeslifex]

I sent you an email regarding the twinscroll setup

[zweebach]

I'm working on replying to everyone's PM's and emails. Please remember - an email is probably the best way to communicate. The PM interface gets full and is slow. Send your zipcode for shipping quote. Here's more pictures of items for sale.

[email protected]

Bride Seat
http://i52.tinypic.com/wkradv.jpg

Bride Seat back
http://i56.tinypic.com/o5c3eu.jpg

[zweebach]

Closer up pictures of the hood. It does have some damage:
http://i56.tinypic.com/2aaenub.jpg

http://i51.tinypic.com/4sl7o9.jpg

[240s13x]

What kind of coilovers do you have and are they for sale?

[lakaiae86]

sent email...

[alohaworld]

same one that emailed you yesterday about whole kit + hood. lmk

[xharobikeslifex]

I just sent another email regarding what I want from your fullrace setup whenever you get a chance either reply back to my email or send me a pm

-John

[va240dude]

Payment sent for both Bride Rails, thanks Steve!

[jdmchuckiwill]

do i see a turbo for 140,
what turbo?

[zweebach]

Moved Pictures to first post of thread.

[zweebach]

do i see a turbo for 140,
what turbo?

Stock T25 turbo.

[dahveed]

Hey I can pick up that sparco this Saturday. Lmk

[zweebach]

What kind of coilovers do you have and are they for sale?

Coilovers are by SPL parts. They are for sale, but I need whatever suspension is on your car.

[epics13]

sent u an email regarding the bumper and other stuff waiting on ur response. thanks

[My240sx]

emailed about the t25, hope it is still available

[2forty]

Are the coilovers still available? How much shipped go 95842.

[nismoracingsx]

just got the shift boot and brake boot, awesome condition and for a good price. Thx man. Started a trader rating for ya.

[Thebeezkneez]

http://i280.photobucket.com/albums/kk200/konjureupauto/ugly240sx.jpg
2012 nissan hobbgoblin

In all seriousness, i would like to buy your bumper. pm sent.

[death]

how much for your kouki tail lights let me know. i NEED them text me at 850 240 7360

[nismoracingsx]

hey, emailed ya on that solid rear bushing kit if its still available.

[zweebach]

Tailights are sold.

how much for your kouki tail lights let me know. i NEED them text me at 850 240 7360

[jsaviour84]

is the bride seat available?

[zweebach]

I've done some maintenance to the thread to show only items that are remaining. I'm still working to get things off the car for those of you that are waiting. All the 180SX body pieces are gone and a few interior items. Thanks again for all the interest. Now somebody buy this built short block - you need to do something with that tax return.

[KaminaSan]

Can you post more pics of the ATi pulley? Did the chip affect anything? It seems shorter than the normal pulleys, what does it run? PS/WaterPump/Alt?

[P-Funk alot]

lemme know if the sale on the z32 rear caliper set up falls through ill take it

[VYKTR]

Works Bell Quick Release & Works Bell Rapfix Short Hub Interested in both pm sent.

[a-s-silvia]

do you still have the ati damper?

[BURSTspeed]

z32 rotors shipped to 61073? also do u happen to have pads as well?Are The rotors warped at all?

[zweebach]

I'm updating the first post in the thread on a daily basis with available items/pictures/prices. Email is the best way to contact me.

do you still have the ati damper?

[a-s-silvia]

What you couldnt just answer my question when you quoted

I'm updating the first post in the thread on a daily basis with available items/pictures/prices. Email is the best way to contact me.

[wildkong]

interested in the brembo rotors if you still have them thanks.

[Z33dori]

bump for a nasty ass short block set up.

glws

[Ruff Ryder 6]

emailed about the bushings

[zweebach]

Just about everything listed for sale is now off the car with pictures added. Will reply to all email tonight.

[redline240sx]

Interested in the z32 30mm calipers. PM me if they are still available, I also have some questions. Thanks

[ChinkyChris]

Would you ship the exhaust? If so PM me 32773 Sanford FL

[JdmDrift4Food]

Need coilovers and lsd if its for s13, pm me! (:

[NYS13SLIDER]

z32 rear brake setup and bride seat still available? pm me, im serious.

[NismoTuner21]

Willing to sell the Type-R BOV by itself? And how do you have pics of the paperwork for the seats?

Thanks!

[Innovative]

front z32 calipers still available i hope! you have been pm'ed.

[Innovative]

btw, awesome parts man. MAD RESPECT +

[zweebach]

Willing to sell the Type-R BOV by itself? And how do you have pics of the paperwork for the seats?

Thanks!

Selling the BOV with the piping and intercooler.

I have the receipt from the seat, but I don't have anything else. Originally purchased in April 2009 from Signal Auto for $855.

[vqboodah]

got everything yesterday, thanks steve!

[Black R]

$ sent for spl coilovers! :)

[silversr]

Pm'd about the S3 cams.

[thursdaymike]

do you have a fuel pressure regulator? pm me.

[hotkarl]

Brakes came in. Thanks man!

[1gr8bar10der]

You've got an email. Good parts, better prices.

[SidewaysTaco]

$100 for both Top Speed Front Strut Tower Brace and the Top Speed Rear Strut Tower Brace???? plus shipping.
also interested in the exhaust and the vlsd....PM me please.. thanks.

[SidewaysTaco]

payment sent!!!

[silversr]

I received the cams today! Thanks man

[QuickSpoolSR]

do you have the converted wiring harness still? what ecu is it and how much do you want if so? PM me

[the555car]

emailed regarding exhaust & pulley

cheers
-Evan

[zweebach]

Cleared out a few more items on ebay.
Looking to unload these last few things before sending the chassis off to a salvage yard. Just a few weeks until I'm ready to let it all go, so lets clear these things out.

[Seraphim38]

love to either see eBay links or at least one link to your eBay store

[zweebach]

Items on ebay now.

zteve | eBay (http://motors.shop.ebay.com/zteve/m.html?_trksid=p4340.l2562)

[SidewaysTaco]

got everything and installed.....free bump for you!!!

[Black R]

Ahh you sold the headlights?

Coilovers received and installed!!! :)

Buy with confidence.

[traxx07]

Emailed. Please get back to me thanks!

[zweebach]

Emailed. Please get back to me thanks!

Emailed back. Chassis is gone as of this morning.

Main things left are just the built short block and wheels and tires.
Lowered the price on the block, lets get it out of my garage.