jza240sx
02-13-2011, 06:45 AM
Up for sale is my hatch. Im trying to get a new car so this needs to go. Im not in a rush to sell so dont lowball me... I will be driving this car daily until it sells. There is rust on this car. There is a hole thats under the car on the driver side but its not big at all. It will be getting patched up. Car is originally from Upstate NY. The last owner is a good friend of mine. I went with him to buy it first week of November 09 and drove it back from Albany NY. It was driven to school and back til first week of Decemeber 09 and We took a trip to Harrisburg PA to pick up wheels from a buddy of mine(I live in central jersey btw). His name on here is Shally2186 he can vouch for this car. Those pics were taken back in March before the hood and hatch was black but nothing has else has changed since then.
Price:
$5500obo with stock SE wheels or steelies
$6500obo with SSR's
Email: [email protected]
MODS
- Wiring harness built by wiring specialist from LM24
- S15 OEM pistons
- New OEM Bearings (Mains and Rods)
- New S15 Oil Pump
- Power Enterprise Headgasket
- Brian Crower Titanium valve springs & retainers
- HKS Rocker Arm Stoppers
- NEW OEM Nissan Rocker arms and HLA's
- NEW OEM Timing Chain and guides
- ACT 6 puck clutch
- Fidanza Flywheel
- New Clutch Master and Slave cylinder
- New Brake master cylinder
- Koyo with single Flexalite fan. Both BRAND NEW
- Greddy front mount with Greddy Piping
- Greddy Type RS BOV
- Ebay Manual Boost Controller set to 12psi
- Welded diff
- Megan street series coilovers
- Greddy downpipe into Apexi N1
- Ebay Short Shifter
- SSR Proffessor SP1 17x8.5 +15 17x9 +12
- Spare Redtop SR - As far as i know it has ARP Studs, Apexi headgasket, and new bearings(mains and rods). If i threw it in there it would idle just fine but obviously alot of smoke would be coming out of the exhaust due to bad ring in cylinder 1 as stated above.
http://i57.photobucket.com/albums/g201/imahustla187/25559_1402888481034_1497014354_1082903_805884_n.jp g
http://i57.photobucket.com/albums/g201/imahustla187/25559_1402880720840_1497014354_1082865_7385893_n.j pg
http://i57.photobucket.com/albums/g201/imahustla187/IMG_1126-2.jpg
http://i57.photobucket.com/albums/g201/imahustla187/IMG_1820.jpg
http://i57.photobucket.com/albums/g201/imahustla187/IMG00046.jpg
Price:
$5500obo with stock SE wheels or steelies
$6500obo with SSR's
Email: [email protected]
MODS
- Wiring harness built by wiring specialist from LM24
- S15 OEM pistons
- New OEM Bearings (Mains and Rods)
- New S15 Oil Pump
- Power Enterprise Headgasket
- Brian Crower Titanium valve springs & retainers
- HKS Rocker Arm Stoppers
- NEW OEM Nissan Rocker arms and HLA's
- NEW OEM Timing Chain and guides
- ACT 6 puck clutch
- Fidanza Flywheel
- New Clutch Master and Slave cylinder
- New Brake master cylinder
- Koyo with single Flexalite fan. Both BRAND NEW
- Greddy front mount with Greddy Piping
- Greddy Type RS BOV
- Ebay Manual Boost Controller set to 12psi
- Welded diff
- Megan street series coilovers
- Greddy downpipe into Apexi N1
- Ebay Short Shifter
- SSR Proffessor SP1 17x8.5 +15 17x9 +12
- Spare Redtop SR - As far as i know it has ARP Studs, Apexi headgasket, and new bearings(mains and rods). If i threw it in there it would idle just fine but obviously alot of smoke would be coming out of the exhaust due to bad ring in cylinder 1 as stated above.
http://i57.photobucket.com/albums/g201/imahustla187/25559_1402888481034_1497014354_1082903_805884_n.jp g
http://i57.photobucket.com/albums/g201/imahustla187/25559_1402880720840_1497014354_1082865_7385893_n.j pg
http://i57.photobucket.com/albums/g201/imahustla187/IMG_1126-2.jpg
http://i57.photobucket.com/albums/g201/imahustla187/IMG_1820.jpg
http://i57.photobucket.com/albums/g201/imahustla187/IMG00046.jpg