Gaging interest fully built mazworx sr22vet longblock

[ross.cottrill]

not even sure about this..im just seeing if there are any parties intersted in my longblock.its fully built,I MEAN EVERYTHING was done.i will try to be brief but its had with such a crazy ass build.ive been working at this setup for 2 years.everything is brand new.block was dissasembled because im anal and wanted it spin balanced.AGAIN,not really sure im going to do this...

-mazworx 2.2l race shortblock (only difference is crower I beams,badass rods)
comes machined for l19 headstuds(1/2 inch)
everything was r&r and cleaned
upgraded 19mm calico coated race bearings(same bearings on mains)
also comes with ROSS performance damper
power enterprise 90mm headgasket with fire ring
cost-$4500

-mazworx fully built p11 sr20ve head
comes machined for l19 headstuds
cnc ported combustion chambers
competion race 5 angle valve job with supertech everything
gasket matched and opened up exhaust ports to match intake ports
comes with sr20ve cams with greddy cam gears
p11 sr20ve valvcover
aem pencil coils
-cost $5000
http://pic20.picturetrail.com/VOL1390/11141261/23703238/395244592.jpg
http://pic20.picturetrail.com/VOL1390/11141261/23703238/395244593.jpg
http://pic20.picturetrail.com/VOL1390/11141261/23703238/395244597.jpg
http://pic20.picturetrail.com/VOL1390/11141261/23703238/395244613.jpg
http://pic20.picturetrail.com/VOL1390/11141261/23703238/395244629.jpg

-mazworx sr20vet headswap pkg
comes complete with everything needed to do the swap.
badass cnc runner intake manifold with q45 90mm t/b
-cost $2000
http://pic20.picturetrail.com/VOL1390/11141261/23703238/395244685.jpg

-brand new p12 20v valvcover ONLY
$250
http://pic20.picturetrail.com/VOL1390/11141261/23703238/395244605.jpg
http://pic20.picturetrail.com/VOL1390/11141261/23703238/395244592.jpg

-brand newp12 cas (goodluck finding any p12 parts)
$375
http://pic20.picturetrail.com/VOL1390/11141261/23703238/395244730.jpg

-sr20ve p12 20v cams (again impossible to find)
$500
http://pic20.picturetrail.com/VOL1390/11141261/23703238/395244652.jpg

im sure im missing a load but thats the just of it..if your looking into building
something of this magnitude,you understand what it will cost you.

OR take all the above for added more parts,pm for package deal

[uperformance]

zomggggggggg my vert wants THIS. 10 grand is a fuckin steallllll.
great seller.

[PerilousActs]

This is one hell of a deal. I've been planning on building exactly this but with a shimless bucket conversion on the head.

Why are you selling it?

[Imarvin240]

wow, such a great deal...you got any pics?

[ross.cottrill]

-not even sure that im letn it go.to be honest with you,ive been building this 98 widebody pretty much from the ground up,and im just sick and f#$king tired of dumping money into it.

-i can get pics if your interested,but its up at the shop where the car has lived for like two years.i work a shitload,have a wife and 2 boys,soo,needless to say my schedule is crazy.pm me if your really serious.

-side note.if i sell this,i will have an absolute shit ton of other parts all brand new.
z32 trans and mazy kit
full badass fuel system with surge tank
aem
etc etc etc...

[darkevildrifter]

Damn wish this was posted before just bought a large chunk of this ..will take these if you part out...
new p12 valvecover
aem pencil coils
new p12 cas

[ross.cottrill]

This is one hell of a deal. I've been planning on building exactly this but with a shimless bucket conversion on the head.

Why are you selling it?

Damn wish this was posted before just bought a large chunk of this ..will take these if you part out...
new p12 valvecover
aem pencil coils
new p12 cas

ok ill let you know..bump #1....

[slow92]

I will give you a free bump ross. I would love to take that block off of your hands since I got your head, but money is really tight right now. glws

[ArBy25DeT]

bump....i say you finish the bitch and post badass vids on youtube haha =D just my .02

[ross.cottrill]

if i have no real interest in this shit within a week,im going to just keep it!!!

[ross.cottrill]

bump#2....now with pics
more of the shortblock once it comes back from the machine shop (getin spin balanced)

[Imarvin240]

hey can you send me pics of everything

[jr_ss]

I'd like to snake those cams and VC off of you but I need to free up some funds first.

[Napalm]

bump for a local

[ryanhelton2000]

If my dad's wife hadn't screwed me out of my inheritance last month, it would be going in my vert or a 240z for my wife. I hope you keep it and get it going so I can see it in action. Im moving back to the pan handle next month. Hell of a setup!