NY: S14 Sr20det (almost) Complete Partout

[yoozef]

IF YOU DONT SEE IT, IT WAS SOLD
- s14 head with BC springs/retainers, intake side valves are bent, exhaust side looks ok, but might need new valves too $200 firm
COMES WITH:
- cam caps (i think i have all the bolts)
- lifters
- shims (missing 2 or 3)
- valve cover studs
- oil tubes (also for sale separately)
MISSING:
- cams
- rocker arms



- HKS springs (no markings on them, but i was told these are 100% HKS springs) $40
- VTC cam gear solenoid (not the cam gear) $40
- i also have 5 rocker arms, so if you're missing some, i can sell them piece by piece ($15 a pop, $10 each after that)
- oil tubes $20 for a pair
- oem timing chain tensioner $30
- used arp headstuds ($5 each)
http://i29.photobucket.com/albums/c276/dzerek/DSC02650.jpg

[beaux240]

do you have driverside door internals? like the slider?

[yoozef]

no, i do not

[NAVY-ET]

do you have the coil pack cover

[yoozef]

no i dont sorry

[Bigt92604]

How much for the Mani shipped to 89166

[yoozef]

$60 shipped

[yoozef]

bizzump
msglnght

[yoozef]

deposit received on the short block, everything else still for sale

[yoozef]

to teh top

[TOMEI GUY-S13]

do you have the valve cover if so how much shipped to 74145

[sr20doc]

How much for the water neck on the head shipped to 46123?
Thanks,
George

[yoozef]

water neck and valve cover are sold

[sr20sean]

how much for the transmission?

[yoozef]

that was sold as well

[yoozef]

short block sold! head still up for sale

[turbox18]

ill give you 120 for head and you keep everything ..

[yoozef]

i'll pm you in a few days, i gotta see if i can borrow the valve removal tool to remove everything the proper way

[Wally_]

Do you still have the VTC cam gear solenoid? it was working ok?

[Leetfade]

yeah that's a little high for a head with bent valves, no cams or rockers. Too bad because I'm looking for a second S14 SR head too... I have JWT cams and fresh rockers.. If you come down on price let me know.

[yoozef]

Do you still have the VTC cam gear solenoid? it was working ok?
i still have the vtc solenoid, i assume it was working prior to timing chain failure, but i have not tested these parts, so it's sold as is. Let me know if you're still interested
yeah that's a little high for a head with bent valves, no cams or rockers. Too bad because I'm looking for a second S14 SR head too... I have JWT cams and fresh rockers.. If you come down on price let me know.
it comes with BC springs/ retainers, and that retails $200 by itself, im also open to best offers

[Wally_]

i still have the vtc solenoid, i assume it was working prior to timing chain failure, but i have not tested these parts, so it's sold as is. Let me know if you're still interested



Could you please check it, giving battery voltage to both terminals on the solenoid you must hear a click sound, like when a relay is activated if you hear the click, then it´s good otherwise don´t.

bye!

[yoozef]

bump this up

[beaux240]

do you have s14 knock sensor wiring?

[yoozef]

i think that went with the block, but i'll double check tomorrow

[EndlessSummers]

Do you still have the cam cap bolts? I would like all of them if possible. let me know...

[beaux240]

i need the vtc solenoid valve located on the intake side in the front do you still have it? still need to know if you have the knock sensor sub harness slips onto the intake manifold and plugs into the knock sensor and then plug into the main harness up above its a gray connector

[yoozef]

i have the vtc solenoid $50 shipped, i dont have the connector...
the cam cap bolts have to go with the cam caps, let me know if you're still interested