RHD conversion question thread

[s tuned]

im making this thread because im about to start my rhd conversion and i know i will have questions and many people in my position will benefit from this aswell.. i dont want this thread to be full of (RHD is pointless, or making a left turn suck, blah blah blah) if you have experience doing a rhd conversion please share information with us. thanks!

[bardabe]

time, patience, measure twice cut once, and the wiring sucks.

[Hashiriya415]

I seriously don't understand people. You could buy a 180sx RHD shell for around $500 or complete drivable car for $1500 and pay shipping here. Isn't that cheaper then doing your conversion?

[s tuned]

^^^ yeah but registration would be a total bitch

[roninwon]

^^^ swap vins with a 240

[Hashiriya415]

why would you register it? To feed the poor governments children. They don't care anything about your 20yo car, just pay up and you can drive it. But wait did you know, there is a way so you can drive it and not pay up these thousands of dollars. Either you swap fire-walls or you swap some numbers and you get same thing RHD vehicle. Smart way to do it just keep your current papers, plates, and metal numbers.

[2d-ink]

here's from my experience, some people might be different dont get me wrong, I drove the car to a glass company had them remove the windshield(it was crack anyway), drove it home with a full helmet on to protect rocks etc, took out the dash, and measure twice, use a sharpie to draw my lines on where I want to cut, remove everything that was in the way so all wiring, engine etc,

Got a Plasma cutter and slowly cut the firewall, make sure to cover up your interior because if you're using a plasma cutter you dont want to burn your seat, carpet etc etc... hope that help.
and on the RHD firewall I left more metal on it then when i cut the LHD firewall, because when you cut you lose metal, so I made sure it had enough over lap to have a smooth weld instead of trying to fill in gaps

then Weld in the new firewall and swap everything over..

[Adam.G]

Where do you buy a complete drivable 180sx from?

[jumpman2334]

why would you register it? To feed the poor governments children. They don't care anything about your 20yo car, just pay up and you can drive it. But wait did you know, there is a way so you can drive it and not pay up these thousands of dollars. Either you swap fire-walls or you swap some numbers and you get same thing RHD vehicle. Smart way to do it just keep your current papers, plates, and metal numbers.
you dont get it do you? you cant just bring a car in from japan and walk it right in. they'll impound that shit before you even get to see it.

[jumpman2334]

Where do you buy a complete drivable 180sx from?
i hope this isnt a serious question. this thread just keeps getting better



and i have never done a rhd swap but have thought about it plenty o times. and 2nd ink sounds like he's got it figured out. thinkin a head and ish

[s tuned]

ok so i started my rhd today removed the engine and the whole wiring harness, dash and 2 front seats..everything is going smooth taking my time and doing things right no cutting corners so i wont have to do extra work at the end.. cutting and welding tomorrow i should start posting pics by tomorrow
ima start posting the steps....


1. remove engine swap (meaning harness, ecu, motor, tranny)
2.remove all the wiring from firewall with fuse boxes
3. remove dash to get the rest of the harness
4.remove seats
5.remove center arm rest
6. remove carpet
7. measure (multiple times)

thats how far ive gotten in the first day i will start adding steps IM DOING IN MY RHD! (im not responsible if by following MY steps you fuck shit up so dont blame me) will add all the steps when im done

[s tuned]

ok so i started my rhd today removed the engine and the whole wiring harness, dash and 2 front seats..everything is going smooth taking my time and doing things right no cutting corners so i wont have to do extra work at the end.. cutting and welding tomorrow i should start posting pics by tomorrow
ima start posting the steps....


1. remove engine swap (meaning harness, ecu, motor, tranny)
2.remove all the wiring from firewall with fuse boxes
3. remove dash to get the rest of the harness
4.remove seats
5.remove center arm rest
6. remove carpet
7. measure (multiple times)

thats how far ive gotten in the first day i will start adding steps IM DOING IN MY RHD! (im not responsible if by following MY steps you fuck shit up so dont blame me) will add all the steps when im done

[Imarvin240]

you should post up pictures as well, it would probably help some people. also, is this being done in an S13 or S14?

[david200095367]

after your done welding buy seam sealer from a auto paint store and cover up all the welds. when installing the interior install pedals before dash goes in. a lot easier that way. i have done a s14 sr/rhd conversion and now working on s13 sr/rhd.

[david200095367]

http://i55.tinypic.com/mkxb1t.jpg

http://i51.tinypic.com/257m642.jpg

http://i52.tinypic.com/2qk76o6.jpg

[Adam.G]

you dont get it do you? you cant just bring a car in from japan and walk it right in. they'll impound that shit before you even get to see it.

^Thats exactly what I was questioning on. I didn't understand where you would buy and be able to drive a JDM vehicle, without all of the troubles of legalizing it.

[ROOSEY]

sick thread man im saving for a front clip so i can do rhd in my vert next winter, it should be interesting lol

btw its looking real good so far!

[miravete]

ahh, to be young again....

anyways....


sooo, hopefully, the rhd clip that you got came with the harness that goes to the back of the car (fuel pump, fuel sender, tail lights, etc)

if not, youre gonna have to re-pin youre rear usdm wiring so the wiring matches and your rear end works :)

door wiring, well, i bought the rhd doors with power folding heated mirrors, BUT you can just swap the door wiring. (take driver side wiring, and put it in passenger side, and vice versa.)

what else...hmmm

oh, i made these, hope they help. they are the translated jdm interior fuse boxes.


66F00
http://i31.photobucket.com/albums/c384/miravete/66foo.jpg

65F00
http://i31.photobucket.com/albums/c384/miravete/65foo.jpg


one is kouki, other is zenki, both s14 :)

ill post more small details that came up as i did my conversion :)

also, please convert your wipers, ebrake, gas/trunk lever.

[s tuned]

sick thread man im saving for a front clip so i can do rhd in my vert next winter, it should be interesting lol

btw its looking real good so far!

lol thats not my car i will post pics by tomorrow mine is a s13

[miravete]

soooo....did you give up?

[Z28ricer]

Done properly:

Firewall removed (no cutting)

http://i239.photobucket.com/albums/ff177/Z28ricer/IMG_0672.jpg

Who the hell stole the firewall ?

http://i239.photobucket.com/albums/ff177/Z28ricer/Mikesbuild/EPSN5818.jpg

http://i239.photobucket.com/albums/ff177/Z28ricer/Mikesbuild/EPSN5820.jpg

Going back together:

http://i239.photobucket.com/albums/ff177/Z28ricer/Mikesbuild/EPSN5860.jpg

http://i239.photobucket.com/albums/ff177/Z28ricer/Mikesbuild/EPSN5905.jpg

http://i239.photobucket.com/albums/ff177/Z28ricer/Mikesbuild/EPSN5874.jpg

http://i239.photobucket.com/albums/ff177/Z28ricer/Mikesbuild/EPSN5949.jpg

http://i239.photobucket.com/albums/ff177/Z28ricer/Mikesbuild/EPSN5948.jpg

http://i239.photobucket.com/albums/ff177/Z28ricer/Mikesbuild/EPSN5992.jpg

http://i239.photobucket.com/albums/ff177/Z28ricer/Mikesbuild/EPSN5998.jpg

[harrypotter]

any updates?

[EnemyS15]

check out my build thread and see the steps i took to do my rhd conversion!


http://zilvia.net/f/chat/378033-my-lhd-rhd-build.html

[harrypotter]

check out my build thread and see the steps i took to do my rhd conversion!


http://zilvia.net/f/chat/378033-my-lhd-rhd-build.html


not bad...just need s13 info

[StaticExchange]

Anyone else's eyes freak out for a few seconds when you saw the glitter paint? HAHA