wtf car wont start after install

[clean]

i switched out dashes on my 93 and i unplugged the ecu and a just about all the harness but im pretty sure i plugged them all back in. the car wont turn over or anything and i tried jumping it. i didnt plug the radio, door light thing but that bout it. the lights work dash lights, cluster everything seems to work but my damm car wont start. wtf did i do? this is really pissing me off. someone please help and add suggestions. thanks

[kapower]

if you did not disconect the battery before you did all of that work, then you may have blown a fuse or two.uuuhhhmmm... your ignition switch may not be hooked up properly. you are going to have to go through the whole system 1 item at a time, Make sure every thing is plugged in properly (to the right plug). check your fuses, make sure your ignition switch is hooked properly. After all of that post up if you don't fix your issue, and provide more detailed info.

[clean]

wheres the ignition switch @? yeah i didnt disconnect the battery before i did it. i thought of that after i unplugged everything. thanks and i'll check it out

[kapower]

Any luck yet? The ignition switch is what you stick the key into, when you turn the key all the way up it switches the starter on. If for some reason that is unplugged your starter won't work. I'am just thinking of stuff from the top of my head. It's hard to say what it could be without seeing your car in person. Be persistant, learn the function of the harness, relays, and fuses, and you will understand what is preventing your car from starting. Good luck.

[clean]

oh yeah i firgured it out after i posted the second time. im a retard. i rememberd i took off a ****ty alarm that was on the car and the alarm slip a ground or some wire off the ignition and i never connected it back together so i went and did and it started. hey thanks for the reply and follow up, thats really cool of you, not alot of guys on the board would do that. peace