Double throw down sale

[cutter]

I sold my 240 so i have boxes and boxes of stuff for sale.

this is a custom made stainless tig welded 3" down pipe for a top mount t3 turbo with a 2.5" 4 bolt outlet. i used this with a precision sc60. the front piece is v banded so you can change it out to what ever flange you need. if you need to change it i will include an extra vband flange. i paid over 450 to build this i will let it go for $150
http://i244.photobucket.com/albums/gg4/sloth240sx/HPIM0945.jpg?t=1296575324

Blitz cold pipes. perfect fit for an s13 with sr. $50
http://i244.photobucket.com/albums/gg4/sloth240sx/HPIM0946.jpg?t=1296575324

2 sets of stock 370cc injectors from an sr. both were pulled from running cars but have been in storage for almost a year. they should work fine. $85 each set with the rail
http://i244.photobucket.com/albums/gg4/sloth240sx/HPIM0951.jpg?t=1296575324

set of sr coil packs with harness. these were pulled from a non running car so i dont know if they are all good or not. $50
http://i244.photobucket.com/albums/gg4/sloth240sx/HPIM0952.jpg?t=1296575324

b&m short throw shifter very nice condition- $140
http://i244.photobucket.com/albums/gg4/sloth240sx/HPIM0961.jpg?t=1296575682

tanabe front strut bar- $40 rucas are sold and so is the other strut bar
http://i244.photobucket.com/albums/gg4/sloth240sx/HPIM0962.jpg?t=1296578454

300zx rear ebrake assemblies lots of shoe life left with cables and brackets for s13- $160/ 300zx rear rotors. only 400 miles on them! $55
http://i244.photobucket.com/albums/gg4/sloth240sx/HPIM0943.jpg?t=1296577849

stoptech rear pads for 300zx front have been sold- $50
http://i244.photobucket.com/albums/gg4/sloth240sx/HPIM0934.jpg?t=1296577849

blitz boost guage black light technology. only $70
http://i244.photobucket.com/albums/gg4/sloth240sx/HPIM0928.jpg?t=1296577849

300zx master cylinder worked great with my full 300zx brake swap. no mushy pedal. almost new-$40
http://i244.photobucket.com/albums/gg4/sloth240sx/HPIM0930.jpg?t=1296577849

circut sports oil block for oil filter relocation or oil cooler. $80
http://i244.photobucket.com/albums/gg4/sloth240sx/HPIM0920.jpg?t=1296578019

SCROLL DOWN!!!!!

[cutter]

fluid cooler is sold. sorry

2 single cam mafs- 25 each/ 300zx maf. i believe this one is fried-20/ cas good working condition i pulled this from my car thinking it was bad but it wasnt-75/ no name cold pipe-25/ stock sr cams in brian crower box. mint condition-75/
http://i244.photobucket.com/albums/gg4/sloth240sx/HPIM0953.jpg?t=1296575324

solid rear strut brace that Mounts to the chassis. this thing is no joke. i installed it and i could feel a differance in how solid the rear felt. $100
http://i244.photobucket.com/albums/gg4/sloth240sx/HPIM0954.jpg?t=1296585991

random aluminum pipes 2.5 and 2.75. the black one with the greddy bov flange is steel. $50 for them all
http://i244.photobucket.com/albums/gg4/sloth240sx/HPIM0955.jpg?t=1296575682

sr o2 housing big one $40/ k&n filter it has a 4.5" coupling-$20 /random high temp silicone couplers and reducers. 2"-2.25" /2.5 90*/4"-3" reducer/ straight 2"/ reducers are $10 each, 90* are 20, straights are $5. i will not ship anything less than $50.
http://i244.photobucket.com/albums/gg4/sloth240sx/HPIM0956.jpg?t=1296575682

10lb aluminum fidanza flywheel. it might need a new friction plate $75/ t25 inlet, t25 outlet 20 each
http://i244.photobucket.com/albums/gg4/sloth240sx/HPIM0957.jpg?t=1296578293

1 piece cold pipe custom made for greddy intake manifold. stainless tig welded. has a greddy flange on it, threaded bung for iat sensor for power fc d-jectro, and iacv port. i had to extend it so the weld very close to the throttle body is ugly. it is mostly covered up by the coupler to the throttlebody. this cost me around 200 to make- $75
http://i244.photobucket.com/albums/gg4/sloth240sx/HPIM0958.jpg?t=1296578293

2 good working iacv for sr.-40 each O2 housing for sr $40
http://i244.photobucket.com/albums/gg4/sloth240sx/HPIM0960.jpg?t=1296575682

[iLL_sx]

Pm me size and price shipped to 60804 for that bmc and middle fitting?

[vg33er200sx]

pm sent re: B&N

also, is that chassis mounting solid rear strut brace for a coupe or hatch?

[ss1156ss]

Does that shifter fit a KA?

[cutter]

There is no marking on the bmc for size. I just know it's alot bigger than the stock 240 one. Yes the shifter will fit a ka. The solid rear strut bar was used on a coupe, but I think it will work on a hatch aswell

[Pure_JDM]

O2 housing for sr $40
http://i244.photobucket.com/albums/gg4/sloth240sx/HPIM0960.jpg?t=1296575682

Is that plug for a big O2 or skinny one? Very interested.

[cutter]

it is for a big one

[xptnike]

you have been pm'd

[ghost_silvia]

Do you have a t28 inlet? (2 bolt) Also looking to pickup that strut bar. Do you ever come to austin?

[Boston240]

im interested in the rear brace. shipping to 02169?

[Mitsubayati]

Do you happen to have a compressor outlet? the 3 bolt one? What you have is the inlet. the two bolt one.

[cutter]

yes i do have a 2 bolt inlet. the strut bar is sold.

shipping on the rear brace will be $15. i get big discounts on shipping.

yes i have a compressor outlet. i actually have 2 of them

[Mitsubayati]

Can u post a pic of the compressor outlets? I'm looking for the 90 degree one. Do you have the bolts for it? How much shipped to 94579?