FS: Work Euroline DH 18x9 +29 18x10+25 4/5x114.3

[knshro13]

Im selling a set of 4 Work Euroline DH dish wheels.
I have 2 18x9 +29 and 2 18x10 +25.
I had these on a Cressida with a 20mm spacer in the front because they would not clear Z32 brakes. These wheels are low disc and will require 20mm + spacers to fit them with big brakes.
Also since they are low disc, the lip size is pretty decent. I would say about 4 inches in the two 9s and about 5 inches on the two 10s.
http://img.photobucket.com/albums/v329/knshro13/Work%20Euroline%20dH/r15.jpg
http://img.photobucket.com/albums/v329/knshro13/Work%20Euroline%20dH/r14.jpg

The condition of the wheels are very good. All the wheels were refinished with a clear coat. Unfortunately the clear on the lips are peeling off however, it is very minor. From a distance, you cannot even tell. There is absolutely no curb rash.
http://img.photobucket.com/albums/v329/knshro13/Work%20Euroline%20dH/r5.jpg

One of the wheels caps have a scratch.
http://img.photobucket.com/albums/v329/knshro13/Work%20Euroline%20dH/r9.jpg

The tires are TOYO EXTENZA HP and the life on the fronts are about 90% and the rears are about 80%.
I am selling the wheels with the tires and will not separate them.
Tire Size: 225-40-18 front and 235-40-18 rear.
http://img.photobucket.com/albums/v329/knshro13/Work%20Euroline%20dH/r8.jpg
http://img.photobucket.com/albums/v329/knshro13/Work%20Euroline%20dH/r11.jpg

My asking price is $1650 but will take offers. But please make reasonable offers.


http://img.photobucket.com/albums/v329/knshro13/Work%20Euroline%20dH/r10.jpg
http://img.photobucket.com/albums/v329/knshro13/Work%20Euroline%20dH/r.jpg
http://img.photobucket.com/albums/v329/knshro13/Work%20Euroline%20dH/r6.jpg
http://img.photobucket.com/albums/v329/knshro13/Work%20Euroline%20dH/r4.jpg


I prefer local pick up but can ship at buyer's expense.



Thanks for looking!

[FaLKoN240]

I think I chatted with you on Facebook or something about your Cressida at some point.

I sold my x8 a while back, but any pics of the car with these wheels on it? Just curious...

[knshro13]

Sure. Here you go!
http://img.photobucket.com/albums/v329/knshro13/cressida/IMG_5308.jpg
http://img.photobucket.com/albums/v329/knshro13/cressida/IMG_5314.jpg
oh and more detailed pictures of the clear peeling since someone asked about it:
http://img.photobucket.com/albums/v329/knshro13/Work%20Euroline%20dH/r13.jpghttp://img.photobucket.com/albums/v329/knshro13/Work%20Euroline%20dH/r5.jpg

[dtmcnamara]

looks dope. wouldnt happen to have a x7 laying around so I could see what it looks like on it? I may possibly get these for my car. Just ordered my engine, tranny, and suspension. Might as well just use the ENTIRE refund check....lol

also $1650 shipped? and will spacers come with them?

if not shipped price to 30044

[4drferio]

did you REDRILL the holes on the rims..because CRESSIDA is 4x100 or 4x114.3 right?

where are you locate in CALI?

pmed me your phone #

do u think it will fit a 2gs gs4

[knshro13]

4drferio, these wheels are 9 hole. they cater to 4x114.3 AND 5x114.3. They come like this factory.

Also, MX83 cressida came 5x114.3. I'm afraid you are mistaking mine as an X73. X73 were all 4x114.3.

Also, Im located in San Gabriel.

PM sent

[Mooch]

Wheels looked good in Super Street Ken! I'm interested but am waiting to hear on another set.

[knshro13]

Thanks Mooch! Let me know.

[knshro13]

bump. any offers? its $1650 OBO with good tires.

[RJs13]

What do you think about these on a jzz30, with origin front fenders and 50mm over fenders. plus some 20 mm spacers

[knshro13]

RSs13, the front would be a 18x9 +4 with my 25 mm spacers.

and the rear would be a 18x10+5. I dont know what that would look like on your sc. but it will lok good. you should buy my wheels. =)

[RJs13]

dood i love these wheels

ill let you know!

[DUBSTEP]

dope as wheels bump for u sir.
wish i had cash to buy.

[knshro13]

Thank you guys.

someone buy them. i sold the car, and now i need to sell the wheels before i move.

[240o'clock]

Where in cali are u located?? If your in so cal let me know cuz im very interested in these wheels

[Spaceboy]

I would give you my crappy daily ek civic for these. lol.

[knshro13]

Thanks guys.

Sorry forgot to post.

Im in the San Gabriel valley. Specifically Montebello.

[4drferio]

$1000 - cash!!!!!!

[jiggysnitz]

Could you do me a favor and get actual measurments of the lip sizes? My calculations come to 3.5inches for the front and 4inches for the rears

[Dsble315]

saw this in super street too i liked when you said you accidentally slid on to an on ramp haahha

[Element_on_20s]

You know my Element needs these Gushi. Juuuust saying.

[knshro13]

Could you do me a favor and get actual measurments of the lip sizes? My calculations come to 3.5inches for the front and 4inches for the rears

youre right about the front, exact measurement was 3.5f but the rear is 4.5in.

[knshro13]

sold. thanks everyone.