racepar1
01-25-2011, 11:54 AM
Carbing steel front strut tower bar
This is an authentic carbing one-piece steel front strut tower bar. It will work for an s-13 or s-14. The paint is chipped and scuffed here and there, but the bar is not dented or bent anywhere. Fitment is awesome!
$100
http://i275.photobucket.com/albums/jj283/racepar1/IMG_0845.jpg
AMS performance weld-in "power brace" (assembled)
This is an AMS performance weld-in "power brace" kit that is installed onto the tension rod brackets. Some of the welds are kind of ugly, but they're all solid. This is way stronger than the nismo brace...
SOLD!
Seam welded s-13 front crossmember
this is a stock s-13 engine crossmember that I fully seam welded. I felt that it made a small difference in stiffness...
SOLD!
Homemade subframe mount braces
I made these because the other ones are kind of overpriced IMO. They are made of 1/8" steel plate and are powdercoated black. I will include the other brackets as well since they were re-drilled to 3/8" for the brackets.
SOLD!
PBM subframe bushing collars
This is a full set of PBM subframe bushing collars (gold). These are pretty much a must-have part if you have stock subframe bushings...
SOLD!
UN-USED drift freaq urethane engine mounts (yellow)
I'm getting the new mounts so I don't need these anymore. These are probably the best mounts out there. I had another set that I used for years without issue. They're true isolated mounts and do not significantly increase vibration. These are un-used, they have only been installed for mock-up.
$90
http://i275.photobucket.com/albums/jj283/racepar1/IMG_0868.jpg
Stock, MACHINED, RWD SR20 flywheel
This is a stock OEM flywheel for a RWD SR20DE. It is freshly machined, ready to use...
$50
http://i275.photobucket.com/albums/jj283/racepar1/evenmorefs015.jpg
Un-cracked S-13 coolant tank
This is an OE nissan coolant tank in un-cracked, not leaking condition. It comes with the plastic cap and the hose.
$25
http://i275.photobucket.com/albums/jj283/racepar1/IMG_0841.jpg
SR20DET injectors
These are the OE purple 370cc SR20DET injectors. All 4 injectors are pretty much perfect and the o-rings are good as well. Pintle caps and connector clips are all intact.
SOLD!
12" electric fan
I'm not sure of the brand, but it is in good working condition. I do not have any of the mounting hardware though, you would need to buy a mounting kit.
$20
http://i275.photobucket.com/albums/jj283/racepar1/IMG_0869.jpg
S-13 KA starter
It's pretty dirty, but it is in good, working condition. The pigtail with the connector is missing though, you would have to wire yours up to it...
$20
http://i275.photobucket.com/albums/jj283/racepar1/IMG_0873.jpg
S-13 SOHC KA belts
I have a full set of barely used, good condition, s-13 KAE accessory drive belts. All 3 belts are included and I will not separate them...
$10
http://i275.photobucket.com/albums/jj283/racepar1/IMG_0871.jpg
S-13 SOHC alternator
It's pretty dirty, but it is in good, working condition. It is originally from a SOHC KA, but I think you can use it on a KADE if you swap the pulleys.
$20
http://i275.photobucket.com/albums/jj283/racepar1/IMG_0870.jpg
S-13 SOHC ignition coil/bracket
This coil is in good working condition and is originally from a SOHC KA. It can be used on a KADE, but you have to lengthen the connector a little to reach...
$10
http://i275.photobucket.com/albums/jj283/racepar1/IMG_0872.jpg
This is an authentic carbing one-piece steel front strut tower bar. It will work for an s-13 or s-14. The paint is chipped and scuffed here and there, but the bar is not dented or bent anywhere. Fitment is awesome!
$100
http://i275.photobucket.com/albums/jj283/racepar1/IMG_0845.jpg
AMS performance weld-in "power brace" (assembled)
This is an AMS performance weld-in "power brace" kit that is installed onto the tension rod brackets. Some of the welds are kind of ugly, but they're all solid. This is way stronger than the nismo brace...
SOLD!
Seam welded s-13 front crossmember
this is a stock s-13 engine crossmember that I fully seam welded. I felt that it made a small difference in stiffness...
SOLD!
Homemade subframe mount braces
I made these because the other ones are kind of overpriced IMO. They are made of 1/8" steel plate and are powdercoated black. I will include the other brackets as well since they were re-drilled to 3/8" for the brackets.
SOLD!
PBM subframe bushing collars
This is a full set of PBM subframe bushing collars (gold). These are pretty much a must-have part if you have stock subframe bushings...
SOLD!
UN-USED drift freaq urethane engine mounts (yellow)
I'm getting the new mounts so I don't need these anymore. These are probably the best mounts out there. I had another set that I used for years without issue. They're true isolated mounts and do not significantly increase vibration. These are un-used, they have only been installed for mock-up.
$90
http://i275.photobucket.com/albums/jj283/racepar1/IMG_0868.jpg
Stock, MACHINED, RWD SR20 flywheel
This is a stock OEM flywheel for a RWD SR20DE. It is freshly machined, ready to use...
$50
http://i275.photobucket.com/albums/jj283/racepar1/evenmorefs015.jpg
Un-cracked S-13 coolant tank
This is an OE nissan coolant tank in un-cracked, not leaking condition. It comes with the plastic cap and the hose.
$25
http://i275.photobucket.com/albums/jj283/racepar1/IMG_0841.jpg
SR20DET injectors
These are the OE purple 370cc SR20DET injectors. All 4 injectors are pretty much perfect and the o-rings are good as well. Pintle caps and connector clips are all intact.
SOLD!
12" electric fan
I'm not sure of the brand, but it is in good working condition. I do not have any of the mounting hardware though, you would need to buy a mounting kit.
$20
http://i275.photobucket.com/albums/jj283/racepar1/IMG_0869.jpg
S-13 KA starter
It's pretty dirty, but it is in good, working condition. The pigtail with the connector is missing though, you would have to wire yours up to it...
$20
http://i275.photobucket.com/albums/jj283/racepar1/IMG_0873.jpg
S-13 SOHC KA belts
I have a full set of barely used, good condition, s-13 KAE accessory drive belts. All 3 belts are included and I will not separate them...
$10
http://i275.photobucket.com/albums/jj283/racepar1/IMG_0871.jpg
S-13 SOHC alternator
It's pretty dirty, but it is in good, working condition. It is originally from a SOHC KA, but I think you can use it on a KADE if you swap the pulleys.
$20
http://i275.photobucket.com/albums/jj283/racepar1/IMG_0870.jpg
S-13 SOHC ignition coil/bracket
This coil is in good working condition and is originally from a SOHC KA. It can be used on a KADE, but you have to lengthen the connector a little to reach...
$10
http://i275.photobucket.com/albums/jj283/racepar1/IMG_0872.jpg