WTB S13 Coupe Parts

[booey13]

I'm looking for mint passenger and driver power door panels. Must be black. Also looking for a coupe manual moonroof. Not power but the kind that pop up like a hatch. Also still lookin for an s13 oem foglight switch and s14 flcas. Looking for parts in good shape. No junk please. Hit me up and let me know what you have and how much you're asking for it. Pictures always help. Text, PM, email are all fine. 515-537-7319 or [email protected]

[booey13]

Bump!.....

[mrmephistopheles]

FYI - The door panels will work from coupe or fastback, also coupes only ever had the powered moonroof, NOT the flip-up sunroof.

[booey13]

I am aware of that. That's why in the first post it just says black power door panels. The thread states coupe parts because they are for my coupe. I wasn't sure on the moonroof. I was under the impression that it might be a jdm part or possibly out of a zenki coupe. If not could you explain this pic and where I might get one? Is it aftermarket?

http://i268.photobucket.com/albums/jj39/booey13/112cf036.jpg

[codyace]

S14 ball joints are not interchangeble with S13 hubs, keep that in mind as well.

[TheRealSy90]

I wish coupes came with popup moonroofs...

[booey13]

.............

[booey13]

Have S13 ball joints ready to be pressed in :bigok: thanks though!

[codyace]

Have S13 ball joints ready to be pressed in :bigok: thanks though!

I was always under the impression you couldn't use S13 joints in the S14 due to the OE hole being larger for the S14 stuff (1mm IIRC).

[booey13]

This is where I got my info from. Anyone know firsthand?

http://zilvia.net/f/tech-talk/48352-s14-lca-s13.html

[codyace]

This is where I got my info from. Anyone know firsthand?

http://zilvia.net/f/tech-talk/48352-s14-lca-s13.html



I'm not doubting the s14 LCA fit, as I know they will.

WHat I'm saying is that the S13 Balljoint has a smaller 'diameter' than the s14. Thus making the s13 balljoint not 'fit' in the s14 hole properly. Again it may be close enough to work though, so do some more searching

[booey13]

I didnt say you were...if you actually "read" through the posts it mentions pressing s13 ball joints into the s14 lcas.

[mrmephistopheles]

If not could you explain this pic and where I might get one? Is it aftermarket?


No idea where to get one, yes it's aftermarket. I'm sure a google search would result in a few hits for vendors of aftermarket sunroofs.

As far as the balljoint/LCA issue, it's like this -

S13 and S14 LCAs will interchange, as well as the balljoints within them.

The S14 balljoint has a different (wider) taper for the spindle seat, meaning that using an S13 balljoint on S14 spindles is a bad idea, and trying to use an S14 balljoint on S13 spindles will result in frustration and failure.

[codyace]

The S14 balljoint has a different (wider) taper for the spindle seat, meaning that using an S13 balljoint on S14 spindles is a bad idea, and trying to use an S14 balljoint on S13 spindles will result in frustration and failure.

That's what I was trying to elude too, but couldn't seem to do it correctly!

Good thing you still post once in a while ;)

[booey13]

No idea where to get one, yes it's aftermarket. I'm sure a google search would result in a few hits for vendors of aftermarket sunroofs.

As far as the balljoint/LCA issue, it's like this -

S13 and S14 LCAs will interchange, as well as the balljoints within them.

The S14 balljoint has a different (wider) taper for the spindle seat, meaning that using an S13 balljoint on S14 spindles is a bad idea, and trying to use an S14 balljoint on S13 spindles will result in frustration and failure.

Exactly...so since the lcas and ball joints are both interchangeable, I could press s13 ball joints into s14 lcas and use them on my s13 coupe which has s13 spindles. No?