S-13 chasis/suspension! Carbing fr. bar, chasis braces, stuff you need..

[racepar1]

5-bolt vlsd w/axles and 4.36 gears
The diff is a JDM unit and is in very good shape. The gearset is confirmed 4.36. It has 5-bolt output shafts and 5-bolt axles are included. The diff is a non-abs unit with s-13 mounting. No diff cover will be included with the diff, you'll have to re-use your own...

pending...


http://i275.photobucket.com/albums/jj283/racepar1/IMG_0855.jpg



Carbing steel front strut tower bar
This is an authentic carbing one-piece steel front strut tower bar. It will work for an s-13 or s-14. The paint is chipped and scuffed here and there, but the bar is not dented or bent anywhere. Fitment is awesome!

$100

http://i275.photobucket.com/albums/jj283/racepar1/IMG_0845.jpg



AMS performance weld-in "power brace" (assembled)
This is an AMS performance weld-in "power brace" kit that is installed onto the tension rod brackets. Some of the welds are kind of ugly, but they're all solid. This is way stronger than the nismo brace...

$80

http://i275.photobucket.com/albums/jj283/racepar1/IMG_0851.jpg



Seam welded s-13 front crossmember
this is a stock s-13 engine crossmember that I fully seam welded. I felt that it made a small difference in stiffness...

$40

http://i275.photobucket.com/albums/jj283/racepar1/IMG_0852.jpg



Homemade subframe mount braces
I made these because the other ones are kind of overpriced IMO. They are made of 1/8" steel plate and are powdercoated black. I will include the other brackets as well since they were re-drilled to 3/8" for the brackets.

$30

PBM subframe bushing collars
This is a full set of PBM subframe bushing collars (gold). These are pretty much a must-have part if you have stock subframe bushings...

$40

http://i275.photobucket.com/albums/jj283/racepar1/IMG_0854.jpg



CLEAN pass front pop-up fender w/light shaved
This is a clean, passenger's side front fender for an s-13 with a chuki front or aftermarket bumper. The sidemarker light has been shaved and it looks really clean. It is not rolled or pulled and has no damage.

$30

http://i275.photobucket.com/albums/jj283/racepar1/IMG_0856.jpg

[Backintoans13]

you dont happen to have a drivers fender also??

[racepar1]

you dont happen to have a drivers fender also??

The driver's side fender is damaged and has a bunch of bondo on it. If you were local I would say you could have it for free with the other one if you wanted...

[slider2828]

Are you parting out your own car?

[racepar1]

Are you parting out your own car?

Not the whole thing, just the parts and pieces that I wan't planning on keeping forever anyways.

[sideways7]

I'll take the front crossmember off your hands. Sending you a pm.

[Mysr20de]

What's the lowest you'll go on the strut bar

[Mikey213]

oh shit that's my old strut bar!!! ahahahahahah GLWS!!! (I DIDN'T USE IT)

[NYS13SLIDER]

can i see a pic of the thickness of the strut bar? and if it clears a greddy intake manifold on an sr20 ill take it,thanks.

[Bushido]

wanna ship the ams thingy?

[racepar1]

What's the lowest you'll go on the strut bar

I'm not going to lowball myself. If you wanna make an offer, you're welcome to, but I'm pretty firm on the price.

can i see a pic of the thickness of the strut bar? and if it clears a greddy intake manifold on an sr20 ill take it,thanks.

It clears the s-14 SR intake mani with my driftfreaq mounts. The bar sits so high that is actually rubs the hood a little occasionally. I would say that it's about 3/4" thick on the narrow side of the tubing. If this bar won't clear your mani, I don't think any of them will...

wanna ship the ams thingy?

Absolutely, I'll PM you with a shipped price...

[Jonnie Fraz]

Original Carbing FSTB is almost $300.00 and you get to wait months for it to get here. $100.00 is more than a fair price.
GLWS buddy!