Z32 Tranny, Hybridynamics Turbo Kit, OS Giken Clutch, great prices!

[whitey240]

4xRC Engineering 1000cc Injectors(Top Feed), Impedance conversion - $350

Mazworx Z32 Conversion - $1100 - SOLD
Z32 Transmission
Modified Bell Housing
1 Piece Steel Drive shaft
Adapter Plate
Hardware
Shifter
Brackets

Nistune ECU with License - $500

Hybridynamics Turbo Kit - $2800 - Shipped!
Hybridynamics Top Mount Manifold
Garrett GT3076R .86 Turbo
Tial 44mm Wastegate
Wastegate Dump Tube
Downpipe
Oil and Water Lines
4" Intake Pipe
Z32 MAF
Air Filter


Greddy RS BOV w/ recirculation adapter - 100

Koyo SR Radiator w/ hoses - $200 shipped

Ebay 3" Cat Back Exhaust - $100

OS Giken Twin Plate Clutch w/ Chromoly Flywheel - $400 - SOLD

Notes:
Transmission is free with purchase of the Z32 Conversion kit. The last thing I want to do is hear from someone looking for a refund because they went out and broke the tranny. The tranny is good and was just put in the car. It is a junkyard transmission with 60k on it.

The car is in storage right now and put together. I can easily start to disassemble the parts as soon as they are purchased but you might have to give me a few days in some cases. This also hinders taking pictures of every nut and bolt that hold it together. I am a legit seller and many will vouch. I have never screwed someone over and I am not going to start now.

thanks for the interest!

Still available!

Video: YouTube - SR20VET 240sx (http://www.youtube.com/watch?v=VMW4lwfIUL0)

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1126.snc4/148856_548478862448_64702177_31871418_2938568_n.jp g

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1190.snc4/154269_548478882408_64702177_31871419_5143555_n.jp g

http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs566.ash2/148880_548478902368_64702177_31871420_2813839_n.jp g


http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs595.ash2/154703_548478927318_64702177_31871422_6313896_n.jp g

http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs581.ash2/150361_548478952268_64702177_31871424_6232048_n.jp g

[sidewaysil80]

stupid question, will this tranny setup work on a s14 with an s15sr and helical rear end?

[Syncade]

Bump for a local

[ilwhipuras]

will the os giken fit a ka?

[whitey240]

stupid question, will this tranny setup work on a s14 with an s15sr and helical rear end?

According to Mazworx site it will fit in the S14: SRVG Adapter Kit (http://www.mazworx.com/index.php?l=product_detail&p=2759)

As long as you don't have something custom done to the driveshaft in order to work with the HLSD it should be fine.

I travel to MD/VA area frequently so we could work something out to save on shipping.

[s15specR]

stupid question, will this tranny setup work on a s14 with an s15sr and helical rear end?


Yes it would fit fine, the driveshaft lenght you may need to double check.

[240sxspeed]

hey def interested in trans set up was going for z33 but wont work with twin disk does the z32 work with the twin set up

[whitey240]

hey def interested in trans set up was going for z33 but wont work with twin disk does the z32 work with the twin set up

Yes, that is the setup on it today. Z32 tranny with the twin plate os giken clutch.

[pikachus15]

Im interesting of buying the z32 transmission kit call me 323 877 2796 Thanks

[jr_ss]

John how many miles/drag events are on the OS Giken?

[whitey240]

John how many miles/drag events are on the OS Giken?

The clutch was slightly used when I received it. Since then I put around 3000 miles on it. I am thinking it has ~50 passes on it, most of them when the car was at 330hp. When the car was at 400 the timing chain broke before I got it to the track and then the 496 got maybe 10 passes. Majority of the time I would boner up the launch and get out of it at the 60 foot mark but that is another story. lol

After the babbling, the clutch is still good and has plenty of life left in it. I wouldn't be selling it if I thought it was junk.

[whitey240]

Im interesting of buying the z32 transmission kit call me 323 877 2796 Thanks

Shoot me a PM with your offer and we can go from there.

thanks!

[whitey240]

Transmission and clutch are now sold.

[jr_ss]

Damn, I was going to say throw it in with the motor, so you didn't have to pull apart. Oh well, thanks again. I'll be getting more funds to you soon.
-Glenn

[whitey240]

The tear down began last night. It is a sad day that all my good parts I have been collecting over the last few years are heading to another home. The tranny and clutch were the first to go. I have a lot more good parts left to go. if the prices are to high feel free to make offers.

[whitey240]

Updated prices... Shoot me some offers on this stuff!