ecu pinouts

[two40guy]

I need a ecu pinout for an s13 ka its 5 speed and I believe came out of a 92 I've searched it can't really find what I'm looking for. Just trying to possibly trace wires, my coil is getting no pwer so naturally I'm getting no spark meaning, car not moving very.. well actually not at all if I could get a pin out or some suggestions that would be tits! Thanks

[Tantwoforty]

its ALL over the place. search better.
or better yet.
just search, since clearly you haven't.
ok, lets play a game.

im going to use google.
and im going to do this..
http://lmgtfy.com/?q=240sx+ecu+pinout

1989 - 1994 Nissan 240SX ECU Diagram (http://www.innovatemotorsports.com/resources/1989_1994_Nissan_240SX.php)
Then, a few seconds later, i found this,,,
http://www.midweststreets.com/240SX/ecupin/S13-1991-1994KA24DE-ECUPinout.xls
then, maybe 25 seconds later.. i came across this..
240sx ECU Pinouts - S-Chassis.com Wiki (http://www.s-chassis.com/resources/wiki/index.php?title=240sx_ECU_Pinouts&redirect=no)

so hmm, i spent less then ONE minute searching and found what you need.
Try to at the very least use google before you post.

[two40guy]

I did search google but on my phone so ssome stuff didn't come up. I needed it on the fly but I guess ill search better next time. Thanks though man

[Tantwoforty]

no prob, kick your phone in the nuts.

[two40guy]

Fuckin nailed it! Still could use some help.. don't get why my coil is getting no power..

[Tantwoforty]

make sure it has god ground..
use a logic probe or a volt tester at the ecu and test the power there, test a few others aswell..
check all fuses ect..
hopefully you have a bad ground, or a bad coil.
if you have power at the ECU but none at the coil it could be a break in the line.
also, is the dizzy working? test that aswell.
get back to me with soem resualts

[two40guy]

well the coil came from my friends running car. but ill test it i got an ecu diagram and a full car wiring diagram so i found what wires could be cut so its only a matter of time before i narrow it down working on it today so ill let you know, thanks!