RB26 T28 turbo on a KA

[NissanEnthus]

Hey everyone, I have already searched and have had no succes in finding info if anyone has installed a single RB26 T28 on a S14 KA24DE? Or can it be done? I really want a sleeper stealth install and not looking go over 300HP. Any advice, pics of installs or items needed to bolt up would be greatly appreciated.

[Sileighty_85]

RB26's dont have T28's

It a slightly bit smaller than a T25, they are actually pretty worthless as a single

[NissanEnthus]

Im sorry I meant Rb25

[boosted KA24DE]

I have done the rb25 turbo on my last setup and it acts just a bit better than the standard t25. Just be aware that if using a t25 manifold, You will need to cut off the t25 flange and weld on a t3 flange. the turbo on rb25 is t3 not t2. Let me know if this is the route you are going cuz I have a t3 flange brand new just sitting in my tool box I will let it go for $25 shipped. Also the t3 flange should be slightly tilted out towards the driver side to clear the power steering pump if doing bottom mount. The exhaust flange is difficult to find and I only found it out of australia. The exhaust flange orientation is not the same as sr20det style and different bolt pattern. Hope this helps been there, done that.

[Sileighty_85]

That link you sent me was a RB26 turbo not a RB25 turbo

[s tuned]

i think it will be best to just go with gt2871R :D i love mine

[skizsystem]

i think it will be best to just go with gt2871R :D i love mine
badass turbo, especialy for the money

[jholman]

rb25 turbo wouldn't be bad but the flanges are all a little odd..