ross.cottrill
01-13-2011, 06:37 PM
trying to even more stuff for this ve build.
>brand new precision billet 6262 twinscroll .82
to my knowledge,this is the only one available with the new oilcooled chra.cft turbo had the guys at precision custom machine this for the ts housing.
http://pic20.picturetrail.com/VOL1390/11141261/19768696/394585145.jpg
http://pic20.picturetrail.com/VOL1390/11141261/19768696/394585146.jpg
http://pic20.picturetrail.com/VOL1390/11141261/19768696/394585148.jpg
i have about $2500 in this.i want $2000 shipped
>brand new ati damper
this was installed on my stroker block and never used.i was sponsored by Ross performance so i got another one for free.this is the street version equipped with the drive for ac belt.i paid over $500 from mazworx
http://pic20.picturetrail.com/VOL1390/11141261/19768696/394583431.jpg
i want $350 shipped
>new cp pistons 89mm(installed but not turned over)9.0-1cr
these were in my shortblock,before i went with the ve head.i had to change pistons due to the ve needing flycut (valve relief )pistons
one of them has a really small scratch on the dome surface.i talked to my machinist and he said it would not effect anything.
http://pic20.picturetrail.com/VOL1390/11141261/19768696/394585222.jpg
http://pic20.picturetrail.com/VOL1390/11141261/19768696/394585221.jpg
http://pic20.picturetrail.com/VOL1390/11141261/19768696/394585220.jpg
i want $350 shipped
>brand new back door intercooler
i had to change this due to power goals.i think this should be fine to around 5-600rwhp.not huge ,but big enough for you guys that slide and soforth.its 3.25 thick,23 inches endtank to endtank.2.5 in and out,and 12 tall.
http://pic20.picturetrail.com/VOL1390/11141261/19768696/394585190.jpg
http://pic20.picturetrail.com/VOL1390/11141261/19768696/394585189.jpg
http://pic20.picturetrail.com/VOL1390/11141261/19768696/394585186.jpg
http://pic20.picturetrail.com/VOL1390/11141261/19768696/394585185.jpg
http://pic20.picturetrail.com/VOL1390/11141261/19768696/394585142.jpg
$225 shipped
pm me for fastest response,thanx..
>brand new precision billet 6262 twinscroll .82
to my knowledge,this is the only one available with the new oilcooled chra.cft turbo had the guys at precision custom machine this for the ts housing.
http://pic20.picturetrail.com/VOL1390/11141261/19768696/394585145.jpg
http://pic20.picturetrail.com/VOL1390/11141261/19768696/394585146.jpg
http://pic20.picturetrail.com/VOL1390/11141261/19768696/394585148.jpg
i have about $2500 in this.i want $2000 shipped
>brand new ati damper
this was installed on my stroker block and never used.i was sponsored by Ross performance so i got another one for free.this is the street version equipped with the drive for ac belt.i paid over $500 from mazworx
http://pic20.picturetrail.com/VOL1390/11141261/19768696/394583431.jpg
i want $350 shipped
>new cp pistons 89mm(installed but not turned over)9.0-1cr
these were in my shortblock,before i went with the ve head.i had to change pistons due to the ve needing flycut (valve relief )pistons
one of them has a really small scratch on the dome surface.i talked to my machinist and he said it would not effect anything.
http://pic20.picturetrail.com/VOL1390/11141261/19768696/394585222.jpg
http://pic20.picturetrail.com/VOL1390/11141261/19768696/394585221.jpg
http://pic20.picturetrail.com/VOL1390/11141261/19768696/394585220.jpg
i want $350 shipped
>brand new back door intercooler
i had to change this due to power goals.i think this should be fine to around 5-600rwhp.not huge ,but big enough for you guys that slide and soforth.its 3.25 thick,23 inches endtank to endtank.2.5 in and out,and 12 tall.
http://pic20.picturetrail.com/VOL1390/11141261/19768696/394585190.jpg
http://pic20.picturetrail.com/VOL1390/11141261/19768696/394585189.jpg
http://pic20.picturetrail.com/VOL1390/11141261/19768696/394585186.jpg
http://pic20.picturetrail.com/VOL1390/11141261/19768696/394585185.jpg
http://pic20.picturetrail.com/VOL1390/11141261/19768696/394585142.jpg
$225 shipped
pm me for fastest response,thanx..