Sexy_Ninja
01-12-2011, 05:47 PM
Tis’ a sad time for me guys. I severely hate to do this, but I have to make an adult decision. I am on my own, paying my own shit without any help from family. I plan on going back to school and get my bachelors later this year and the debt i have is getting overwhelming. I'm just tired of living paycheck to paycheck.
Let’s get to the point.
FS:
RB25DET from JDMHKUP still on the palette (NO PART OUT) $3000 FIRM
I AM LOSING MONEY SELLING THIS CHEAP WITH THE ITEMS BELOW, my loss is your gain.
Parts put into it/parts I have that will come with it:
-New NGK Copper plugs(installed)
-New oem water pump(installed)
-New oem timing components(installed)
-New Greddy timing belt(installed)
-New gates PS, water pump, and ALT belts(installed)
-SPEC stage 4 clutch(BNIB)
-HKS black limited edition BOV(BNIB) w/ flange that bolts into the oem pipe
-Universal intercooler core from ebay
-Custom Ebay intercooler piping made for an r33 rb25
-Zerolift Gen 2 motormounts to fit s13/s14 x-member
-Oem harness
-Transmission
-oem a/c compressor
All you need to do is wire everything up, get a driveshaft, and pop in a thermostat and you're running!
http://i28.photobucket.com/albums/c210/SideWayz180SX/img1254347436189.jpg
http://i28.photobucket.com/albums/c210/SideWayz180SX/img1254347433682.jpg
http://i28.photobucket.com/albums/c210/SideWayz180SX/img1254347432909.jpg
http://i28.photobucket.com/albums/c210/SideWayz180SX/img1254347434944.jpg
Shell:
89' 240SX coupe. (NO PART OUT) $600 OBO
-Complete shell(title not in my name) should be used as a track car or file for an abandoned vehicle(new title in your name)
-all body parts and gas tank
-all interior pieces
-all wiring to the car
-NO SEATS
-everything is there, just not IN the car
-includes oem 7 spoke alloys
-NO FRONT WINDSHEILD
-Two tone, light blue and gray
http://i28.photobucket.com/albums/c210/SideWayz180SX/7533_1157199408172_1173335510_30421.jpg
http://i28.photobucket.com/albums/c210/SideWayz180SX/7533_1157199448173_1173335510_30421.jpg
http://i28.photobucket.com/albums/c210/SideWayz180SX/7533_1157199488174_1173335510_30421.jpg
http://i28.photobucket.com/albums/c210/SideWayz180SX/7533_1157199608177_1173335510_30421.jpg
Other Goodies:
-MAX USA coilovers 10k front,8k rear (used in a few events over the years, still in good shape) $600 OBO
-Circuit sports RUCA MAKE OFFER
-CS toe rods MAKE OFFER
-Tein inner rods MAKE OFFER
-CS outer tie rods MAKE OFFER SOLD
-Prosport 52mm amber gauges (oil pres, water temp, oil temp, boost) MAKE OFFER
-s13 center vent gauge bezzle (holds 3 52mm gauges) MAKE OFFER SOLD
-S13 silvia front end (includes frp oem fenders, oem metal hood, bricks, corner lights, headlight brackets, s13 silvia bumper support, and oem K’s front bumper with jdm half/half blinkers $500 FIRM PENDING SALE
-crown vic set 15x7’s (no tires) MAKE OFFER
-Silver SPARCO 3 Point racing harness $60 OBO
Stay tuned. I may have a few more things I’ll list up.
Later down the road I have another 240sx coupe I’m parting out for now I just want to get rid of this. I’ll keep everyone updated.
*MONEY TALKS and you know the rest*
Buyer pays any shipping.
Means of contact:
[email protected]
or simply PM me here
Thanks for looking guys.
Let’s get to the point.
FS:
RB25DET from JDMHKUP still on the palette (NO PART OUT) $3000 FIRM
I AM LOSING MONEY SELLING THIS CHEAP WITH THE ITEMS BELOW, my loss is your gain.
Parts put into it/parts I have that will come with it:
-New NGK Copper plugs(installed)
-New oem water pump(installed)
-New oem timing components(installed)
-New Greddy timing belt(installed)
-New gates PS, water pump, and ALT belts(installed)
-SPEC stage 4 clutch(BNIB)
-HKS black limited edition BOV(BNIB) w/ flange that bolts into the oem pipe
-Universal intercooler core from ebay
-Custom Ebay intercooler piping made for an r33 rb25
-Zerolift Gen 2 motormounts to fit s13/s14 x-member
-Oem harness
-Transmission
-oem a/c compressor
All you need to do is wire everything up, get a driveshaft, and pop in a thermostat and you're running!
http://i28.photobucket.com/albums/c210/SideWayz180SX/img1254347436189.jpg
http://i28.photobucket.com/albums/c210/SideWayz180SX/img1254347433682.jpg
http://i28.photobucket.com/albums/c210/SideWayz180SX/img1254347432909.jpg
http://i28.photobucket.com/albums/c210/SideWayz180SX/img1254347434944.jpg
Shell:
89' 240SX coupe. (NO PART OUT) $600 OBO
-Complete shell(title not in my name) should be used as a track car or file for an abandoned vehicle(new title in your name)
-all body parts and gas tank
-all interior pieces
-all wiring to the car
-NO SEATS
-everything is there, just not IN the car
-includes oem 7 spoke alloys
-NO FRONT WINDSHEILD
-Two tone, light blue and gray
http://i28.photobucket.com/albums/c210/SideWayz180SX/7533_1157199408172_1173335510_30421.jpg
http://i28.photobucket.com/albums/c210/SideWayz180SX/7533_1157199448173_1173335510_30421.jpg
http://i28.photobucket.com/albums/c210/SideWayz180SX/7533_1157199488174_1173335510_30421.jpg
http://i28.photobucket.com/albums/c210/SideWayz180SX/7533_1157199608177_1173335510_30421.jpg
Other Goodies:
-MAX USA coilovers 10k front,8k rear (used in a few events over the years, still in good shape) $600 OBO
-Circuit sports RUCA MAKE OFFER
-CS toe rods MAKE OFFER
-Tein inner rods MAKE OFFER
-CS outer tie rods MAKE OFFER SOLD
-Prosport 52mm amber gauges (oil pres, water temp, oil temp, boost) MAKE OFFER
-s13 center vent gauge bezzle (holds 3 52mm gauges) MAKE OFFER SOLD
-S13 silvia front end (includes frp oem fenders, oem metal hood, bricks, corner lights, headlight brackets, s13 silvia bumper support, and oem K’s front bumper with jdm half/half blinkers $500 FIRM PENDING SALE
-crown vic set 15x7’s (no tires) MAKE OFFER
-Silver SPARCO 3 Point racing harness $60 OBO
Stay tuned. I may have a few more things I’ll list up.
Later down the road I have another 240sx coupe I’m parting out for now I just want to get rid of this. I’ll keep everyone updated.
*MONEY TALKS and you know the rest*
Buyer pays any shipping.
Means of contact:
[email protected]
or simply PM me here
Thanks for looking guys.