GodSpeed TD05 18G and TD06 20G Bottom Mount Turbo (Direct Bolt On)

[Fatboy Garage]

Godspeed TD05 18G and TD06 20 Bottom Mount Turbo

Both Driect Bolt on SR20 Redtop and Blacktop

TD05 18G on the Left and TD06 20G on the Right

http://i49.photobucket.com/albums/f263/kensua6/DSC_4001.jpg


TD05 18G

http://i49.photobucket.com/albums/f263/kensua6/18G%20turbo/sr2018g_6-1.jpg

http://i49.photobucket.com/albums/f263/kensua6/18G%20turbo/sr2018g_5-2.jpg

http://i49.photobucket.com/albums/f263/kensua6/18G%20turbo/sr2018g_3-2.jpg

TD05 18G Turbo Spec.

Bearing system: Journal Bearing
Compressor Wheel Diameter: 50.3 / 68mm
TURBINE Wheel Diameter: 49.2 / 56mm
Turbine TRIM: 57
Turbine flange type flange: T25
Downpipe flange type : 240sx 5 bolt type
Nozzle Area: 8cm²
Cooling type : oil and water cooled.
Horsepower rating: 300-380 hp
BOLT ON TURBO FOR S13 S14 S15 (SR20 MOTOR)
Actuator set at : 14.5 PSI
CFM: 600

Mod on our Time Attack 240SX, SR20 Redtop Stock with HKS CAM, Godspeed Intake Manifold , Turbo Manifold , Turbo Back Exhuast , Stock Piston and Rods

YouTube - Godspeed Time Attack 240SX S14 18G Turbo Dyno 1st Pull (http://www.youtube.com/watch?v=Sa_CfXxkM78)

YouTube - Godspeed Time Attack 240SX S14 18G Turbo Dyno 2nd Pull (http://www.youtube.com/watch?v=ZqXVz_sqj6g&feature=related)

YouTube - Godspeed Time Attack 240SX S14 18G Turbo Dyno 3rd Pull (http://www.youtube.com/watch?v=M8bOuildgo4)

YouTube - Godspeed Time Attack 240SX S14 18G Turbo Dyno 4thd Pull (http://www.youtube.com/watch?v=mnQFw4okDwk&feature=related)

http://i49.photobucket.com/albums/f263/kensua6/IMG00163-20100907-1358.jpg


more info. please check

#/f/tech-talk/323337-godspeed-project-18g-turbo-dyno-test.html

TD06 20G


http://i49.photobucket.com/albums/f263/kensua6/DSC_3998.jpg

http://i49.photobucket.com/albums/f263/kensua6/sr2020g_6.jpg

This is on a Black top S14 with 650cc injector , stock internal and 14.5 psi.

TD06 20G Turbo Spec.

Bearing system: Journal Bearing
Compressor Wheel Diameter: 58.8 / 68mm
TURBINE Wheel Diameter: 58.8 / 67.14mm
Turbine TRIM: 57
Turbine flange type flange: T25
Downpipe flange type : 240sx 5 bolt type
Nozzle Area: 8cm²
Cooling type : oil and water cooled.
Horsepower rating: 400-450 hp
BOLT ON TURBO FOR S13 S14 S15 (SR20 MOTOR)
Actuator set at : 14.5 PSI
CFM: 640

No Restrictor need for oil feed line

TD05 18G
$330 Shipped (Lower 48 State)
$362.17 Shipped/Taxed (CA Customer)
$310 Pick Up Preferred Cash


TD06 20G (In Stock!!!!
$450 Shipped (Lower 48 State)
$493.87 Shipped/Taxed (CA Customer)
$430 Pick Up Preferred Cash


Please PM for Payment Method.

Fatboy Garage Motorsport Inc
GODSPEED Project
2518 Continental Ave
El Monte CA 91733
P: 626-442-3988 ask for Ken
W:godspeedproject.com

[projectslider]

fawk!! these are to good to be true!!
are these dependable for a full drift car!?
let me know shipped for an 20g to zip 00926!

[gunluvS14]

this is direct bolt on and everything line up?
wow, not bad

[r34sr]

YES! i will definitely be running the 20g this summer for my KA24 build.....if those dyno numbers are for sr20's imagine what a KA will put down.

[StryfeS13]

In regards to the TD06 20G...will it bolt up to a KA-T bottom mount T25 manifold without clearance issues? Also, does it use the standard SR turbo elbow?

Also, is that actuator adjustable..? Looks like it.

[TheRealSy90]

It's an adjustable actuator and uses the typical 5bolt exhaust elbow from the factory sr turbos.

[SuicidnS13]

Will there be any fitment issues with the 20g on an sr20 swap. I cant wait till you guys mount this to one of your guys track cars. Please let us know how the fitment is. Does it hit the motor mount?

[Fatboy Garage]

Here is the Picture of the flange that we have, so you can use after market intake and intercooler

http://i49.photobucket.com/albums/f263/kensua6/flanget25inlet.jpg

http://i49.photobucket.com/albums/f263/kensua6/DSC_3702.jpg

http://i49.photobucket.com/albums/f263/kensua6/DSC_3699.jpg

This set is $40 Shipped

Thanks

Ken,S

[SuicidnS13]

So your saying the factory inlet and outlet of my t28 will not bolt up? Or are these clocked differently?


Sent from my iPhone using Tapatalk

[Allmtoreg]

So your saying the factory inlet and outlet of my t28 will not bolt up? Or are these clocked differently?


Sent from my iPhone using Tapatalk

same question for for t25 outlets?

[projectslider]

still waiting for my shipping qoute!!

[Fatboy Garage]

So your saying the factory inlet and outlet of my t28 will not bolt up? Or are these clocked differently?


Sent from my iPhone using Tapatalk

same question for for t25 outlets?

no the Stock one will work, everything bolt on but if you have after market FMIC you might need to change the adapter depend on what kind of kit you have.

Thanks

Ken,S

[Moon Ill]

Is it ok to run the 18G without the water lines?

[norcal_black240]

Any warranty with these?
Which country are the turbo's made?

[Fatboy Garage]

Is it ok to run the 18G without the water lines?

no is not ok to run it without water, turbo will not cover by warranty.

Any warranty with these?
Which country are the turbo's made?

1 year warranty as long as the turbo is installed by ASE Cerf. tech , turbo is made over sea.

Thanks

Ken,S

[90hatchie]

im ase certified
so if it blows up on me your gonna honor my certification?

[Fatboy Garage]

im ase certified
so if it blows up on me your gonna honor my certification?


Yes of course, as long as you have a copy of certificate we will give you a warranty exchange no question ask.

Thanks

Ken,S

[Moon Ill]

no is not ok to run it without water, turbo will not cover by warranty.



1 year warranty as long as the turbo is installed by ASE Cerf. tech , turbo is made over sea.

Thanks

Ken,S

That is fair enough.

I'm going to shoot you a PM about something.

[Fatboy Garage]

All Pm Sent!!!!

[Fatboy Garage]

All Pm Sent!!!!

[SuicidnS13]

Price on a package deal of

Turbo Manifold (t25 bottom mount)
Turbo Elbow (Screamer)
tdo5-18g turbo

shipped to 89031 please

thanks

[Fatboy Garage]

All Pm Sent!!!!

[Corbic]

Go 20G.

Any future for a Evo-III style 16G or Ball-Bearing options?

[Fatboy Garage]

Go 20G.

Any future for a Evo-III style 16G or Ball-Bearing options?

Sure dont have both of the option.

Thanks

[mikey_S13]

any updates on on the time attack 240 running the new 20g?

..has anyone else installed the 18g?? i have mine sitting on my room. im still gathering few more parts till i put it in and im curious to how the setup is with anyone else?!

[Fatboy Garage]

any updates on on the time attack 240 running the new 20g?

..has anyone else installed the 18g?? i have mine sitting on my room. im still gathering few more parts till i put it in and im curious to how the setup is with anyone else?!

we should have an update around March.

[Fatboy Garage]

all pm sent!!!

[tx240ss]

About two years ago I bot a Greddy kit to turbo my ka motor with 150lbs compression on all four cyl and it ran great until last month when it blew rings in #2. dyno pulled [email protected] Bot a red top SR and have all the Greddy bits. now the questions:

1. can I run the td06-20g on the SR.
2. how big of injectors should I run? Now 370s
3. can I use the e-manage system? will it have to be reprogrammed?
4. How much more power (#/f/#) could I expect over stock running at 8-10lbs boost?
5. Whats the best manifold to get?

current set up
3 " exhaust
FMIC
TD06-20g
370s
fuel rail
walpro fuel pumphttp://images.intellitxt.com/ast/adTypes/mag-glass_10x10.gif (#/f/#)
z32 maf
emanage

[Allmtoreg]

you might need something like 750s. i bought 550ccs to go with the 18g listed above.

[90hatchie]

heres my experience bolting the 18g up
stock oil line does not bolt in
oil drain does not go towards the block
had to mod oem t25 drain to fit turbo
screamer pipe wont bolt up due to tiny divider in exhaust housing
heres a crappy picture of it bolted onto the motor
motor is going into car soon


http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/hs057.snc6/168737_10150394587690652_764790651_16926571_232240 8_n.jpg

[S14_drift junkE]

Has anybody ran these yet? I have found only a couple people but would like to hear more reviews!

[mikey_S13]

heres my experience bolting the 18g up
stock oil line does not bolt in
oil drain does not go towards the block
had to mod oem t25 drain to fit turbo
screamer pipe wont bolt up due to tiny divider in exhaust housing
heres a crappy picture of it bolted onto the motor
motor is going into car soon


http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/hs057.snc6/168737_10150394587690652_764790651_16926571_232240 8_n.jpg

are you using ISIS oil lines? im having trouble trying to fit one of the ISIS oil lines (the side with the wastegate. the rod is kinda of in the way..)

[90hatchie]

im useing 1 isis line
use the 90 degree fitting for turbo as i have

[HOOCH]

Im torn between these 2 i was told to get the 18G but it says max is 380 and if im going to be around 380 wouldnt i be better off running the 20G so im not maxing the turbo out?

[badbob2121]

PM Sent..............

[Fatboy Garage]

all pm Sent, Still got 15 pcs left!!!!

[r34sr]

where are the damn 20g's and dyno!!

cant freakin decide between the 20g or 18g until i see a dyno, and you better gimme the same price when im ready! :)

[Fatboy Garage]

where are the damn 20g's and dyno!!

cant freakin decide between the 20g or 18g until i see a dyno, and you better gimme the same price when im ready! :)


the 20g is still delay from the factory, and they are $100 than the 18G

Thanks

Ken,S

[tacoboy]

holy crap thats cheap... i bought one used for $600 as up until a few months ago they were non existant with the sr20 flange.

These arent the same as the FP 20g's are they?

[Fatboy Garage]

holy crap thats cheap... i bought one used for $600 as up until a few months ago they were non existant with the sr20 flange.

These arent the same as the FP 20g's are they?

FP 20g?? well the TD06 20G we have top and bottom mount available . Top mount are T3 flange and bottom mount are T2 flange with internal gate.

Thanks

[supra_speed]

no they arent the same as forced performance 20g=authentic

[Fatboy Garage]

yea I just checked , everything pretty much the same, both our bottom are T2 flange

[Chaluska]

You dont offer a standard .6 bar / 8psi wastegate? id love to pick one up, but im not going for high-boost

[upstate240sx]

are both of these models still avail?

[Fatboy Garage]

You dont offer a standard .6 bar / 8psi wastegate? id love to pick one up, but im not going for high-boost

sorry only offering 14.5 PSi

are both of these models still avail?

only the 18G are in stock right now, 20g will be here end of April

[clay9110]

same question for for t25 outlets?

no the Stock one will work, everything bolt on but if you have after market FMIC you might need to change the adapter depend on what kind of kit you have.

Thanks

Ken,S


Pretty sure there clocked different because when I was mocking my 18g up, i bolted the stock inlet and outlet on and they are clocked different then when on the stock t25. Kinda wondering whats needing to be done to fix this?

[Fatboy Garage]

Pretty sure there clocked different because when I was mocking my 18g up, i bolted the stock inlet and outlet on and they are clocked different then when on the stock t25. Kinda wondering whats needing to be done to fix this?

yea I still waiting for the picture so I know what kind of problem you having, we have been pm each other for almost a month but i havent got any picture yet so I cant solve the problem for you yet.

thanks

Ken,S

[Chaluska]

http://www.nissanparts.cc/catalog/nissan/STANCEST8.jpg

These are most likely what you need to fix the angle from a T04 housing to old style t25 elbows..

[mikey_S13]

yea def need those clocking adapters for inlet and outlet pipes to work.

so far got mine installed on the motor. jus need clutch, injectors, and ems to get this thing running and see what numbers this bad boy can get .. shooting for 300+

ill snap some pics tomorrow!

[1337]

!Zar! is a good friend of mine (sitting next to me actually), and he has been running the td05 18g on his s13sr for about ten events now and only has good things to say about it performance wise. He should be getting a dyno run some time soon. If he does, I'll try to post them for him, unless he does so his self once he's unbanned.

[Fatboy Garage]

!Zar! is a good friend of mine (sitting next to me actually), and he has been running the td05 18g on his s13sr for about ten events now and only has good things to say about it performance wise. He should be getting a dyno run some time soon. If he does, I'll try to post them for him, unless he does so his self once he's unbanned.

Thanks!!!~~

[onesloka]

Do you still have 18g for $330 shipped? If so I want one please pm me. Also any info on the flanges for sure not clocked correctly for red top t25?

[1337]

Installing this turbo is exactly like installing a t28 into an s13sr.

[Fatboy Garage]

all pm sent!!!~~

[Csomme]

Ran 18g on my SR, very very easy 300hp, great turbo. had trouble with the drain line, but as long as you know what you're doing you're fine.

This turbo is a no brainer for the money, i drifted the absolute shit out of the car and ran the turbo at 18psi and it was awesome.

The only bad thing I have to say about the turbo is the 5 bolt exhaust housing. The bolt holes were off by a little bit, took some drilling of the O2 housing, but I got it to work.

I love this turbo.

BAM. If you want video, PM me.

http://i1006.photobucket.com/albums/af185/chadpsommer/chaddrifting2-1.jpg

[Fatboy Garage]

Ran 18g on my SR, very very easy 300hp, great turbo. had trouble with the drain line, but as long as you know what you're doing you're fine.

This turbo is a no brainer for the money, i drifted the absolute shit out of the car and ran the turbo at 18psi and it was awesome.

The only bad thing I have to say about the turbo is the 5 bolt exhaust housing. The bolt holes were off by a little bit, took some drilling of the O2 housing, but I got it to work.

I love this turbo.

BAM. If you want video, PM me.

http://i1006.photobucket.com/albums/af185/chadpsommer/chaddrifting2-1.jpg

nice!!!!~~~~~

[slowerthanyou]

any update on the 20g's?

[Fatboy Garage]

any update on the 20g's?


we will have it by end of next week.

Thanks

[SuicidnS13]

Do you guys sell the required water and oil lines? If so how much? Pm me pricing please

[Fatboy Garage]

TD06 20G are now Available, ready to ship!!!

http://i49.photobucket.com/albums/f263/kensua6/DSC_3998.jpg

http://i49.photobucket.com/albums/f263/kensua6/sr2020g_6.jpg

This is on a Black top S14 with 650cc injector , stock internal and 14.5 psi.

TD06 20G Turbo Spec.

Bearing system: Journal Bearing
Compressor Wheel Diameter: 58.8 / 68mm
TURBINE Wheel Diameter: 58.8 / 67.14mm
Turbine TRIM: 57
Turbine flange type flange: T25
Downpipe flange type : 240sx 5 bolt type
Nozzle Area: 8cm²
Cooling type : oil and water cooled.
Horsepower rating: 400-450 hp
BOLT ON TURBO FOR S13 S14 S15 (SR20 MOTOR)
Actuator set at : 14.5 PSI
CFM: 640

No Restrictor need for oil feed line

TD05 18G
$330 Shipped (Lower 48 State)
$362.17 Shipped/Taxed (CA Customer)
$310 Pick Up Preferred Cash


TD06 20G *** IN STOCK
$450 Shipped (Lower 48 State)
$493.87 Shipped/Taxed (CA Customer)
$430 Pick Up Preferred Cash


Please PM for Payment Method.

Fatboy Garage Motorsport Inc
GODSPEED Project
2518 Continental Ave
El Monte CA 91733
P: 626-442-3988 ask for Chris
W:godspeedproject.com

[Fatboy Garage]

we got 20 set of the TD06 20G (bottom Mount) instock!!! , ready to ship!!!

[240bch]

That s14 needs at least 740cc injectors with that turbo. Going to be ordering mine on the 1st and hopefully have dyno for you guys later in may

[melvaboost]

the 18g was great installed it about 3 months ago, till the seals went out on it. i should still have a warranty on it. it was installed by a ASC Cerf. Tech an have the reciept , an have the receipt from paypal when when i paid for the 18g turbo. so am i gona have any problems with an exchange? what i really want is the 20g so instead of sending me a 18g just send me a 20g an i'll pay the difference. thanks let me know if thats ok....!

[Okinawandrifter87]

anybody have any reviews on the 20g?

[Fatboy Garage]

the 18g was great installed it about 3 months ago, till the seals went out on it. i should still have a warranty on it. it was installed by a ASC Cerf. Tech an have the reciept , an have the receipt from paypal when when i paid for the 18g turbo. so am i gona have any problems with an exchange? what i really want is the 20g so instead of sending me a 18g just send me a 20g an i'll pay the difference. thanks let me know if thats ok....!

please send the turbo back to us, asap once we receive the bad one we will send you the new one out

please send it with your original receipt and a copy of ASE cref.

Thanks

[SuicidnS13]

the 18g was great installed it about 3 months ago, till the seals went out on it. i should still have a warranty on it. it was installed by a ASC Cerf. Tech an have the reciept , an have the receipt from paypal when when i paid for the 18g turbo. so am i gona have any problems with an exchange? what i really want is the 20g so instead of sending me a 18g just send me a 20g an i'll pay the difference. thanks let me know if thats ok....!

this is the first one ive heard of failing so far. How much boost was it running?

[!Zar!]

I'm running the 18g and have had ZERO problem with the turbo its self.

[SuicidnS13]

daily driven or track only car?

[melvaboost]

yes i will have it sent as soon as i can with ricept.

it was a dd and a freqent difter i was running 15-20psi, daily at 10psi
even tho i had a hicup i still like this turbo. like i said i dont want the
18g im going to run the 20g an just pay the difference! thanx

AKA; MEL

[westky240]

I wanna know more about the 20g! Im gonna order one tomorrow more then likely. Im looking for 400hp. I have the mods to do it except for turbo since my gt2871r went out. How does this turbo spool?

[westky240]

id like some information soon so i can order this.

[westky240]

sorry to keep bumping, but i need to order a turbo tomorrow and i want some more info,

[Fatboy Garage]

i think believe you gave us a call already??

[westky240]

Ordered my 20G today! i will have it tomorrow, and installed!

[Fatboy Garage]

Ordered my 20G today! i will have it tomorrow, and installed!

nice !!!

Thanks!!!!

[r34sr]

right now all that is stopping me from ordering is , i cant seem to figure out if there are any aftermarket wastegates that can be bolted on to replace the stock 14.5psi one to run a lower number like 7 psi mabe.

really anyone?

[westky240]

so i got my turbo on and i only had to modify the turbo elbow and return line. it spools good!! and its feels better then my gt2871r i had. i didnt get to drive it much because it was late and im running a screamer pipe:) plus i let it idle for 30 mins to get the turbo lubricated well..

[westky240]

also props to godspeed for getting me my turbo so quick and being easy to communicate with!!!

[clay9110]

Here is the Picture of the flange that we have, so you can use after market intake and intercooler

http://i49.photobucket.com/albums/f263/kensua6/flanget25inlet.jpg

http://i49.photobucket.com/albums/f263/kensua6/DSC_3702.jpg

http://i49.photobucket.com/albums/f263/kensua6/DSC_3699.jpg

This set is $40 Shipped

Thanks

Ken,S


Ken,

This is what I pm'd you about. You quoted me at 70 shipped when u have it listed here for $40...

[Fatboy Garage]

Ken,

This is what I pm'd you about. You quoted me at 70 shipped when u have it listed here for $40...


yea cause your pm said you need the one same as riley , this is not the same one actually , we dont have the elbow anymore, we only have the one connect that intake, and that one is $25 shipped

[clay9110]

Ahh ohk well then what is different about the one riley had on his car?

So out of this kit you have the straight adapter, what do u recomend doing for the elbow then since the stock s13 sr20det one does not line up correctly?

[!Zar!]

daily driven or track only car?
Mostly track, with some street driving on occasion.

right now all that is stopping me from ordering is , i cant seem to figure out if there are any aftermarket wastegates that can be bolted on to replace the stock 14.5psi one to run a lower number like 7 psi mabe.

really anyone?

You know that the wastegate that they supply can be adjusted right? Just like how the HKS one is adjustable for more or less psi, so is this one.

[r34sr]

really. for some reason i assumed that 14.5 was the lowest....so how low exactly can it be adjusted for?.....i really appreciate this info asap as im in the process of a full rebuild and planning my turbo setup...thanks.

[Fatboy Garage]

really. for some reason i assumed that 14.5 was the lowest....so how low exactly can it be adjusted for?.....i really appreciate this info asap as im in the process of a full rebuild and planning my turbo setup...thanks.

i dont think you adjust it lower, unless you change to a HKS internal gate

Thanks

[240bch]

Payment sent thru paypal this morning.pm sent also. Thanks

[phi_ho1]

Can other elbow fit in instead of the screamer pipe?

[phi_ho1]

And i was think to bring my car to u guys to do the install how much for everything?

[Fatboy Garage]

And i was think to bring my car to u guys to do the install how much for everything?

Sorry we dont do installation

Can other elbow fit in instead of the screamer pipe?

if your elbow have a divider on the middle, you might need to trim the divider down.

Thanks

[s14unimog]

If these have nothing to do with the Forced Performance units that are discontinued then they look IDENTICAL; I have an FP unit. If they are, there is a slight fitment issue with the motor mount (mounted to a Tomei Expreme); you need to shave about 1/4" from it to fit down there. I did 394whp in 92*F on a Dynojet at ~18psi on a stock bore S13 SR20.

[Fatboy Garage]

If these have nothing to do with the Forced Performance units that are discontinued then they look IDENTICAL; I have an FP unit. If they are, there is a slight fitment issue with the motor mount (mounted to a Tomei Expreme); you need to shave about 1/4" from it to fit down there. I did 394whp in 92*F on a Dynojet at ~18psi on a stock bore S13 SR20.

nice power!!!

[Fatboy Garage]

These are back in stock. PM ME YOUR ORDERS!

[Fatboy Garage]

All turbo back in stock. ORDER NOW!

[Fatboy Garage]

Still have these in stock!

[fallen soul]

Deff wanna order one next pay check!

[SRpetey]

So this turbo is clocked like the S15 turbo and not the s13 turbo, right?

[Fatboy Garage]

Offer is still available!

[Fatboy Garage]

Still available at these low prices!

[Fatboy Garage]

offer still valid!

[Fatboy Garage]

This offer is still going on!

[Fatboy Garage]

This sale is stillll going on! Don't hesitate to PM ME.

[Fatboy Garage]

offer is still on

[Eric911]

Has anyone try the g18 on ca18 I was running a t28 but blown it recently

[RPS13_NISMO KNIGHT]

bump for Ken S.
he's a great salesman always on time and always on point Thanks Ken

Pug

[Fatboy Garage]

Still in stock! PM ME your orders!

[Fatboy Garage]

Offer is still valid!

[Fatboy Garage]

This offer is still going on!

[Fatboy Garage]

offer is still available!

[Fatboy Garage]

These are still in stock!

[Fatboy Garage]

These are still on sale!

[Fatboy Garage]

Still have this offer available!

[Fatboy Garage]

Turbos are still in stock!

[Fatboy Garage]

both turbos are still in stock!

[Fatboy Garage]

special is still valid

[Fatboy Garage]

These turbos are almost out of stock.

[imverus]

Can i run the 18g or 20g with the SR20's stock internals and what power will i be making with 18g and 20g?

Here's my mod list.

s13 blacktop sr20det
-stock internals
-sard 550cc injectors
-z32 maf
-Front mount intercooler
-Full 3 inch exhaust
-walbro 255 fuel pump
-300zx fuel filter
-apexi air filter

[TheRealSy90]

You could make 300whp with an 18g and a tune.

[Fatboy Garage]

You can check out the dyno sheet we have on our website and also a video for the 18g:

SR20 18g: 18G TD05 TURBO CHARGER (SR20 S13 S14 S15) [TC-051] - $550.00 : GodSpeed Project, The Art of Performance (http://www.godspeedproject.com/shop/18g-td05-turbo-charger-sr20-s13-s14-s15-p-1071.html?zenid=k31t861el59t4pfkhj6jao12f4)

SR20 20g: 20G TD05 TURBO CHARGER (SR20 S13 S14 S15) [TC-055] - $650.00 : GodSpeed Project, The Art of Performance (http://www.godspeedproject.com/shop/20g-td05-turbo-charger-sr20-s13-s14-s15-p-1496.html?zenid=k31t861el59t4pfkhj6jao12f4)

[Fatboy Garage]

Still on sale and ready to ship!

[Fatboy Garage]

Ready to ship!

[Fatboy Garage]

Still have these available!

[Fatboy Garage]

These are still in stock!

[Fatboy Garage]

These turbos are still in stock!

[Fatboy Garage]

Still have these turbines in stock!

[Fatboy Garage]

These are still in stock!

[Fatboy Garage]

Still have these turbines in stock!

[Fatboy Garage]

Turbos are still on sale!

[Fatboy Garage]

Still in stock!

[Fatboy Garage]

Turbines still available!

[Fatboy Garage]

Still available!

[Fatboy Garage]

Still have these turbines in stock!

[Fatboy Garage]

still in stock!

[Fatboy Garage]

50% off sale going on today, last day.


#/f/advertiser-announcements-feedback/420917-godspeed-project-black-friday-special-50-off-msrp.html (#/f/advertiser-announcements-feedback/420917-godspeed-project-black-friday-special-50-off-msrp.html)

[Fatboy Garage]

in stock ready to ship.

[Fatboy Garage]

Still have these in stock!

[Fatboy Garage]

Turbos in stock!

[Fatboy Garage]

These are still available in stock!

[Fatboy Garage]

In stock ready to go!

[Fatboy Garage]

These are still in stock!

[Fatboy Garage]

These are still available!

[Fatboy Garage]

18g & 20g still avialable!

[Fatboy Garage]

In stock ready to go!

[Fatboy Garage]

in stock ready to go!

[venom]

so, how much are they now? trying to get one first week of january. thank you.

[Fatboy Garage]

so, how much are they now? trying to get one first week of january. thank you.


Same price as what is in thread..

[Fatboy Garage]

these are still available!

[venom]

Same price as what is in thread.. thank u wanted to make sure

[Fatboy Garage]

thank u wanted to make sure


No problem! :)

[Fatboy Garage]

Still have these available!

[Fatboy Garage]

Still in stock!

[Fatboy Garage]

I still have these available for pick-up or to be shipped out!

[Fatboy Garage]

This is still available to order!

[Fatboy Garage]

Still have these available to order.

[Fatboy Garage]

Still available for shipping out.

[Fatboy Garage]

Still have these available to order!

[Fatboy Garage]

Want to make great power on a stock sr? TD05-18G for perfect power. TD06-20 for MORE power! :)

[Fatboy Garage]

bump for crazy sale pricing!

[Fatboy Garage]

Offer is still valid!!! 300hp on stock sR!

[Fatboy Garage]

everything in stock!!

[Fatboy Garage]

friday bump!!!!

[Fatboy Garage]

Monday Bump!!!

[Fatboy Garage]

Tuesday bumper cars!!!

[Fatboy Garage]

Check out the fan page!!! Godspeed Project - Automotive - El Monte, CA | Facebook (http://www.facebook.com/godspeedproject)

[Fatboy Garage]

Thursday bump!

Godspeed Project - Automotive - El Monte, CA | Facebook (http://www.facebook.com/godspeedproject) like the page!!!

[Fatboy Garage]

Friday BUMP! Friday the 13th!

Like our fan page! Godspeed Project - Automotive - El Monte, CA | Facebook (http://www.facebook.com/godspeedproject)

[Fatboy Garage]

Monday bump!!! Godspeed Project - Automotive - El Monte, CA | Facebook (http://www.facebook.com/godspeedproject)

[Fatboy Garage]

Tuesday bumper cars!

[Fatboy Garage]

Thursday bump! Like our fan page Godspeed Project - Automotive - El Monte, CA | Facebook (http://www.facebook.com/godspeedproject) :) :D

[Fatboy Garage]

If you have any questions regarding this turbo let me know! Check out the TD05-18g on a KA24DE!

KA24DET Chris Billedo @ Adams Motorsports Park. Drift - YouTube (http://www.youtube.com/watch?v=gSCBJjz3Ars)

[Fatboy Garage]

Happy Hump Day!!!

[Fatboy Garage]

Thank god its friday!!! Bump!

[Fatboy Garage]

Monday bump! Yee!

[Fatboy Garage]

Monday bump! Godspeed Project - Automotive - El Monte, CA | Facebook (http://www.facebook.com/godspeedproject)

[Fatboy Garage]

TGIF! Bump!!!

[Fatboy Garage]

Happy Hump day!!!

[Fatboy Garage]

Happy Hump Day!

[bluekouki]

damn good price i hope 20g is still on sale when im ready..When do you get full boost on stock sr20det

[bluekouki]

just ordered the 20g ...Ken was great and answered all my questions and cant wait to get it

[Fatboy Garage]

Bump!!!!!!!!!!!

[Fatboy Garage]

Happy Hump Day!! Godspeed Project - Automotive - El Monte, CA | Facebook (http://www.facebook.com/godspeedproject)

[Fatboy Garage]

Monday bump! Like our page!!! Godspeed Project - Automotive - El Monte, CA | Facebook (http://www.facebook.com/godspeedproject)

[Fatboy Garage]

Happy Hump Day! Godspeed Project - Automotive - El Monte, CA | Facebook (http://www.facebook.com/godspeedproject)

[Fatboy Garage]

Happy Tuesday Bump! Check out our fan page!!! Godspeed Project - Automotive - El Monte, CA | Facebook (http://www.facebook.com/godspeedproject) :)

[PIN GIO 2]

interested in 18g turbo for sr20 pick up price

[bluekouki]

so i got th 20g up and running, very happy with turbo the only problem with it is the wastegate i think its a little weak , the boosts creeps up slowly to red line ,at red line i get full boost 20psi ....should i upgrade with hks wastegate?

[Fatboy Garage]

You could try to use an HKS wastegate but check to see if vacuum lines are free of any leaks and other things that can cause it to creep.

[Fatboy Garage]

Bump for the week!

[GreenMNTDC5]

If you have any questions regarding this turbo let me know! Check out the TD05-18g on a KA24DE!

KA24DET Chris Billedo @ Adams Motorsports Park. Drift - YouTube (http://www.youtube.com/watch?v=gSCBJjz3Ars)

What's it take to get this into a ka24de???

[redss]

I am have a hard time trying to keep these turbos boosting anything less than 20PSI. Does the actuator work fresh out of the box or do I need to adjust it?

I have both 18G and 20G but I have a bad feeling that if I keep spinning them at 20+ psi, they are going to crater. Is there a maximum boost rating they can spin safely?

[Fatboy Garage]

20psi is not the maximum. From personal testing we've gone up to 29/30psi. Try taking the "load" off the actuator by pulling the nut out. That should help it go back to the 14psi that it's rated at.

[redss]

Adjusting the actuator works. Awesome power at 19 to 20psi.

I posted a question to your PM about the 20G. Can you reply?

[600supersport]

this 20g is lining up well with everything so far from my s15 t28 on s13 redtop in my '95 zenki, just need to change the oil feed fitting bolt, shave some off the motor mount and it's good to go, everything else fits.

[Fatboy Garage]

bump for 20g!!