PDA

View Full Version : WA FT- testing waters 97, clean, full suspension, spl, works bell, nardi....


Pblesh85
01-10-2011, 08:43 PM
I am just testing to see what pops up for trades. I really miss my coupe and have been thinking about getting another. That is what I have my mind set on and will be VERY PICKY when it comes to picking one.

THE ONLY TRADES I WANT ARE:
-SUPER CLEAN coupes(silvia front a big plus)
-zenki s14 with navan aero

NO AFTER MARKET AERO
NO FWD, TRUCKS, OR DD KIND OF CARS....
NO AUTOS....


There are 128,xxx on the clock and it has a clean title. I am the 4th owner but the last person only had it for 1,000miles. Ive had it since 118,xxx and about 3 years now. I bought the car completly stock and thats pretty much how it is now.

It is an OE le model with the tan leather interior. the only flaw is the driver seat has a tear in the seam that goes under your ass. It just happened about 2~3 months ago. Other than that the interior is in very good condition. The car is an auto but will come with a ALMOST complete 5 speed swap:
-98,xxx mi trans
-propper ecu
-UNCUT lower harness
-drive shaft
-manual trans cross member
-clutch peadal
-brake padal(easier to cut the auto pedal and put the rubber peice on)
-clutch master cylinder

Maybe more but cant think right now. All of those parts cam off of the same low mi car.

My mods:

interior:
-works bell hub/quick release/lock
-nardi seude 330 classic
-PBM drift button

suspension

front installed-
-Spl tension rods, outter tie rods, z33 Tein inner with PBM spacer, nismo power brace, whiteline front swaybar with end links, Z32 30mm alum calipers, cross drilled and slotted rotors, hawk hps pads, bf goodrich lines, russel speed bleeders, ichiba 25mm spacers, PBM coilovers 10k springs

rear installed-
-new oem rear rotors, hawk hps pads, bf goodrich lines, russel speed bleeders, ichiba 25mm spacers, PBM coilovers 8k springs

rear not installed-
-Spl traction rods, upper control arms, toe rods, solid diff bushings, solid subframe bushings, Kazz 2 way, greddy diff cover, whiteline swaybar with end links....(all parts are bnib)

Will come with the car:
-BNIB buddy club spec 2 ex. 3in piping resonated
-3in test pipe
-new tires on oem wheels
-90% tread on oz sport 17x10+35 3 peice wheels (front 2 wheels were damaged due to REALLY FUCKED UP POT HOLE)


There may or may not be a few more things that I am forgetting,but thats all I can think of as of right now. The car is in really good condition, the only bad things I believe an exaust hanger broke on the stock exahust and the check engine light is on for something to do with the maf (will have it checked out before the car is sold) Other then that there are no issues with the car. All of the parts have right around 3k miles on them, except for all of the suspension arms which have 2-3 hundred, everything was bought brand new by me, also installed by me.

Im sure there is more I am forgetting, but thats all I can think of as of right now.


http://i105.photobucket.com/albums/m205/Pblesh85/wheels/P6080027.jpg
http://i105.photobucket.com/albums/m205/Pblesh85/wheels/P3060008.jpg
http://i105.photobucket.com/albums/m205/Pblesh85/wheels/P3060009.jpg
http://i105.photobucket.com/albums/m205/Pblesh85/wheels/P6100033.jpg
http://i105.photobucket.com/albums/m205/Pblesh85/wheels/P3090003.jpg
http://i105.photobucket.com/albums/m205/Pblesh85/wheels/P3090005.jpg

SHUT THE FUCK UP ABOUT MY STICKER!!! ITS NOT YOUR FUCKING CAR.

Pblesh85
01-16-2011, 08:50 PM
NEW WHEELS

Blitz 03 17x8.5/9

http://i105.photobucket.com/albums/m205/Pblesh85/wheels/2011-01-16_192016.jpg
http://i105.photobucket.com/albums/m205/Pblesh85/wheels/2011-01-16_191947.jpg
http://i105.photobucket.com/albums/m205/Pblesh85/wheels/2011-01-16_192048.jpg
http://i105.photobucket.com/albums/m205/Pblesh85/wheels/2011-01-16_192105.jpg

Hatemy7
01-16-2011, 08:57 PM
Clean. I am loving it

Pblesh85
01-18-2011, 06:34 PM
..............

Pblesh85
01-27-2011, 10:09 PM
top again......

ncbodybuilder
01-28-2011, 09:20 AM
I love those blitz wheels, are you ever in NC anymore ?

LimeLite Racing
01-28-2011, 01:55 PM
I don't see any posts about the sticker. Clean car, glws.

Pblesh85
01-28-2011, 02:47 PM
No im in wa now. I was at Bragg but moved.

01-28-2011, 03:01 PM
trade?

http://zilvia.net/f/cars-sale/348133-soccal-fs-1993-240sx-coupe-silvia-replica.html

Pblesh85
01-28-2011, 03:06 PM
I would need some more pics. What color was it before ? Accidents, title, ect...

Feel free to pm me.

S13Silvia917
02-12-2011, 04:14 PM
Is there a ballpark price or only trades?

JDM_Tuner
02-12-2011, 07:18 PM
what are the wheels in the first pics called?

Pblesh85
02-13-2011, 12:01 AM
Thank you for the compliments.

Wheels in first pick are old school oz futura's 17x9/10+35

No price, not for sale.

Car now has full jdm front/rear bumpers with valance and lip(waiting to go on next week), 2way , greddy diff cover, buddy club spec 2, cusco carbon front/rear strut tower bars all installed. Also CEL is off.

SPL front lca's and PBM knuckles are waiting to be installed as well.


You can not get this suspension setup for less than 8k