PDA

View Full Version : GA Tires, Greddy FMIC, 2871r Intake, Oil Cooler, Extended Studs, Lug Nuts, Ignitor, MISC


garagelu
01-10-2011, 04:57 PM
PM me or email me at [email protected] Everything is located in downtown ATL.

I have 3 Federal 595 tires for sale. All 3 tires are 255/35/18 size. All three still have 80-85 percent tread life left. There is camber wear on one side but you can flip them on the other side and run them.

Selling them dirt cheap....

40 dollars each....or 100 dollars for all 3
Willing to ship greyhound if you are willing to pay shipping cost.

http://farm6.static.flickr.com/5283/5313942913_a79dbc7fee_z.jpg
http://farm6.static.flickr.com/5009/5314539064_b049a7833b_z.jpg
http://farm6.static.flickr.com/5006/5313943387_f6728ffd66_z.jpg
http://farm6.static.flickr.com/5043/5314539574_dfaa71f279_z.jpg

This is a Greddy RSPL intercooler kit for S13 SR. This will work for s13 or s14 but will only work if you have a s13 sr in the car.

This is the RSPL version which is now selling for over 1000 dollars. The RSPL has the more efficient tube and fin design. The Greddy VSPL is the cheaper one which uses a bar and plate design.

Now includes the XS engineering couplers and T-bolt clamps you need to install. This are XS engineering not XS power parts.

PRICE: 400 dollars plus shipping

http://farm5.static.flickr.com/4097/4892280723_34e84ed607_z.jpg
http://farm5.static.flickr.com/4139/4892280985_e459e08e42_z.jpg
http://farm5.static.flickr.com/4094/4892879654_bf09569eba_z.jpg
http://farm5.static.flickr.com/4086/5196415588_61444ece3d_z.jpg


OEM Nissan oil cooler-This came off a 300zx TT. Can be used on any car. No need for AN lines. Just use oil resistant rubber lines and connect them up.

PRICE: 30 dollars shipped

http://farm5.static.flickr.com/4105/5027031513_0c033bd336_z.jpg

2871r 3 inch inlet INTAKE-This is only for the 2871r with a 3 inch inlet. Its a hose techniques 3 inch 90 degree elbow, stainless steel 3 inch 90, and a straight 3 inch XS engineering coupler. I used this with a z32 maf. I'll include a few hose clamps also.

PRICE: 35 dollars shipped

http://farm6.static.flickr.com/5248/5261915339_a5b1d546a8_z.jpg
http://farm4.static.flickr.com/3635/3375189549_ef3de52249_z.jpg

Circuit Sports 60 mm Extended Studs-These work for s13 front and rear and also s14 rear. BRAND NEW

PRICE: 45 dollars shipped

http://farm6.static.flickr.com/5242/5344615170_d411f52b15_z.jpg

Braille Battery Tie Down-This is a braille battery tie down that came with my braille battery. Don't need it anymore. It is adjustable on top so it can fit many different batteries.

PRICE: 15 dollars shipped

http://farm6.static.flickr.com/5004/5343962061_d5da99cc5f_z.jpg

Buddy Club lug nuts-These are nearly new lug nuts. 12 x 1.25 thread pitch. Qty:4

PRICE: 15 dollars shipped

http://farm6.static.flickr.com/5041/5343962273_0d09ff3771_z.jpg

KA/SR Pilot Bushing-This is a brand new bushing. Bought it from the dealer and never used it.

PRICE: 5 dollars shipped

http://farm6.static.flickr.com/5287/5343963017_a530c17b39_z.jpg

Q45 Ignitor-This is a working ignitor. Can be used on SR swaps.

PRICE: 18 dollars shipped

http://farm6.static.flickr.com/5250/5344573702_d3bb35423a_z.jpg

drift240_2009
01-10-2011, 05:19 PM
ill take the metal elbow.