Need help w/ PS line.

[cardoza]

So I ripped open this line on my SR swapped 240.

http://www.flickr.com/photos/[email protected]/5141301442/http://farm5.static.flickr.com/4068/5141301442_700559323a_b.jpg

Don't ask me why it was run under the sway bar, I have no idea.

I'm assuming that this is the high pressure line running from the PS pump to the steering rack but was wondering if anyone could confirm this. If that is the case does that mean that this line would be able to replace it?

http://ep.yimg.com/ca/I/yhst-66005700432110_2132_42097293

It's the high pressure PS line made by ISIS that supposedly eliminates a lot of the stock line.

Also if anyone can give me some advice on WTF was going on with my line please feel free to chime in. I'm not sure if the line from the single cam was bent to work with the SR swap or what, but it is something that I have seen no where else in all of my research that I've done.

Thanks! http://240atlanta.com/forums/images/smilies/wavey.gif

[cardoza]

Spoke to the guy I bought it from, turns out that it does seem to be a ghetto rigged power steering line from the previous single cam set up. Still anyone have any confirmation for me?

[nieko]

If it is super looped around and everything, yeah the previous person just bent and looped the SOHC line to make it work.

There is really no problem in doing this unless it kinks or breaks like yours did.

Order stainless line, call it a day :D