Built ka swap and other random part out pieces

[urnext]

Ok guys I had this whole car posted up before but now I'm parting it out as it has to go. This is a brand new crate engine with only around 2000 miles (I have receipts for this!). The transmission has about 145,000 miles. But a brand new stage spec stage 4 clutch w/ only about 2000 miles as well. This motor wasnt ever drifted or even raced for that matter. The car was built as a show car.

The motor put down 578hp & 386 ft lbs. tq to the wheels on 110 octane and 316hp on pump gas w/ a mild tune


Engine:
578 HP / 386 FT lbs TQ
2.4L KA24DE DOHC 16V

Block bored and honed .020 over
JE 9:1:1 Forged Pistons
Eagle Rods
ARP Hardware
Supertech Valves
Supertech Bearings
Supertech Keepers
Knife Edge Crank shaft
Stage 2 ported/polished cylinder head
Cosmetic Head Gasket
Price $3000

Revhard Manifold- $400
Projectsilvia 3” downpipe- $100

Spec stage 4 clutch- $200
Spec lightened flywheel- $100

PWR Front mount Intercooler- $175

Vibrant 3" Cat-back exhaust- $200

PHAT KAT fuel rail- $150


Exterior:
Extreme Dimensions Front Bumper- $100
Extreme Dimensions Rear Bumper-$100
Extreme Dimensions Skirts-$100


Interior:
Autopower Roll cage- $300

Suspension & Wheels:
19x8.5 F 19x9.5 R Enkei RPF1 wheels- $900
225/35/19 F 255/35/19 R BFGoodrich Tires- $800
http://i141.photobucket.com/albums/r80/hettingerbrd/Car/3243196628_253a6a0d89.jpg
http://i141.photobucket.com/albums/r80/hettingerbrd/Car/LuisMartinez240DynoSheet.jpg
http://i141.photobucket.com/albums/r80/hettingerbrd/Car/IMG_3055copy.jpg

Everything is obo whatever sells out of this stuff gets my car going for this season so lets get a move on :D

[Edwin562]

car looks fukin awesome

[hopefull]

Rev hard manifold shipped to 21114 and the ems

[Paper_Tiger240]

Ems complete setup, injectors fuel rail, and turbo manifold

Shipped to 91763

[urnext]

Rev hard manifold shipped to 21114 and the ems
Shipping is going to run $25. EMS has a pending sale but its not sold till I have cash in hand just letting you know

Ems complete setup, injectors fuel rail, and turbo manifold

Shipped to 91763

Shipping will be $40 read the above about the EMS. Also I'm not looking to really part the turbo setup but make me a reasonable offer and I'll consider it.

if either of you is interested in buying this stuff email me at [email protected] which is also my paypal addy
Thanks

[JonathanPrem]

I sent you a email to [email protected]

[hopefull]

Would you do 4 for the manifold

[urnext]

Would you do 4 for the manifold

yea I can do that plus ship

[JonathanPrem]

sent you pm for the AEM.

[urnext]

Thread updated
I'm trying to move this stuff out of the space its taking in the shop, Make me a reasonable offer I'd really like to see this engine go to a good home.

[JFIVE]

Pm best price on coils shipped to 64130. Also what's condition. Ready to buy.

[urnext]

heres a link to the engine running
Car :: MPEG0012.mp4 video by hettingerbrd - Photobucket (http://s141.photobucket.com/albums/r80/hettingerbrd/Car/?action=view&current=MPEG0012.mp4)

[Boston240]

how old and how many miles are on the coilovers? shipping to 02169?

[phaiwezzie]

2nd dibs on coilovers, how many miles?

[phaiwezzie]

sorry its not letting me pm you. also interested in the flywheel how many miles/resurfaces?

[alty319]

interested in the coils and clutch as well. i emailed you.

[urnext]

Coils are sold guys

[urnext]

edited for items left, make me some offers on the rest

[project-D180]

how much u want for vavle spring kit

[urnext]

how much u want for vavle spring kit

3k and it comes with a built KA

[bmitchell_ga]

You said you bought the motor as a built crate engine. Where did you buy it from? Does it have cams? Also does it have springs? And only 316hp on pump gas? explain

[urnext]

HRT performance (http://www.handcraftedracing.com/KA24DEcrate.html)

The motor was only on 12lbs when it made 316. With the right turbo setup and a good tune this motor would easily make 400+ on pump as a daily and still be safe. I also have all the paperwork to go with the motor. Full cost when it was picked up was right at 6k with the stage 2 port and polish job.

[eSThurTeen]

you selling engine and turbo set up for 3 or just the engine alone?? interested

[urnext]

you selling engine and turbo set up for 3 or just the engine alone?? interested
Turbos gone but the manifold and tial 38mm are still there. Id sell them with the motor for $3200 or make me some sort of offer. Also I'm a dealer for Garret the turbo id rec on this motor is a 3076 I can hook you up on a new one if interested.

[arj]

transmission shipped to 48183 thanks!

[hopefull]

still have the manifold????

[racerx2k1]

Last Activity: 03-03-2011 12:13 PM