PDA

View Full Version : GA FS: Built KA longblock! ARP,CP,COMETIC CHEAP!

s13Kurt
12-31-2010, 06:15 PM
Need to get some space in my garage for a new project.
S14 motor
Complete intake manifold with all sensors, stock injectors, Throttle body.
Head and bottom end fresh rebuild Don't remember exact mileage, but no more than a few K's.
Stock rebuilt head with ARP head studs
Cometic metal Headgasket
Cp 9:1 forged pistons
Stock rods shotpeened.

As you can see in the pics the head/bottom end is very clean and fresh looking and is ready to put in whatever shell/project you have. Will come with a fresh painted wrinkle black valve cover. ASKING 650. Low ballers will be ignored!! Shipping might be possible at the buyers expense. Pm or text at 404-353-8869 for quickest reply. Thanks for the space and bump if you look:)


http://i763.photobucket.com/albums/xx278/khstile/979f13dd.jpg
http://i763.photobucket.com/albums/xx278/khstile/e2df1604.jpg
http://i763.photobucket.com/albums/xx278/khstile/65a90614.jpg
http://i763.photobucket.com/albums/xx278/khstile/49a98384.jpg
http://i763.photobucket.com/albums/xx278/khstile/87a71580.jpg
andyv316
12-31-2010, 06:32 PM
good price. if only it was tax time
nightsauce
12-31-2010, 11:10 PM
Please have this next week. We can discuss shipping if you have this next week
Nick_04K
12-31-2010, 11:26 PM
Good deal here.
vanimal
01-03-2011, 01:17 AM
I know probably a nub question but w/e. What's the difference between the s13 KADE and the S14 KADE besides the valve cover and I guess the harness...
RHDskyline
01-03-2011, 01:31 AM
The valve cover isn't the difference. The valve cover is different cause the head is totally different.

The ka24e is A single cam head.

the ka24de is a dual cam head
n8RPS13
01-03-2011, 01:58 AM
I know probably a nub question but w/e. What's the difference between the s13 KADE and the S14 KADE besides the valve cover and I guess the harness...

Nothing really! The valve covers are not different either. The biggest two differences are the harness and somwhere between 94-95 Nissan moved the KA from OBD I to OBD II and then the cams are different as well.
smbonn2005
01-03-2011, 02:26 AM
The valve cover isn't the difference. The valve cover is different cause the head is totally different.

The ka24e is A single cam head.

the ka24de is a dual cam head

Seriously dude? He said S13 and S14 KADE. There is one extra bolt in the valve cover to the back of the head on the S14. Also the front cover for each is a little different with the bolt holes. The S13 and S14 had different cams as well. Thats it other than the harness and swapping to OBD2

Nothing really! The valve covers are not different either. The biggest two differences are the harness and somwhere between 94-95 Nissan moved the KA from OBD I to OBD II and then the cams are different as well.

Yes the valve covers are different. S14 has an extra bolt hole in the back. And in 1996 it went to OBD2.

:axe::rl::smash:
andyv316
01-03-2011, 06:17 AM
Seriously dude? He said S13 and S14 KADE. There is one extra bolt in the valve cover to the back of the head on the S14. Also the front cover for each is a little different with the bolt holes. The S13 and S14 had different cams as well. Thats it other than the harness and swapping to OBD2



Yes the valve covers are different. S14 has an extra bolt hole in the back. And in 1996 it went to OBD2.

:axe::rl::smash:

Also the intakes are different along with the egr setup. s13s have a wierd second set of butterflies in the runners that an s14 doesnt. water bumps are different to, one bolt.
vanimal
01-03-2011, 11:53 AM
Thanks for the info guys.
jahmias
01-03-2011, 02:05 PM
very interested..
Any reciepts?
I imagine the block was bored and decked?
Any footage of this motor functioning?
compression numbers?
s13Kurt
01-03-2011, 06:35 PM
Sold for asking price. Thanks for the space zilvia.