3bar_dc2
12-30-2010, 09:44 PM
I'm parting out my big turbo setup from my Evo and am selling my holset.
The 7 blade is a 60 lbs/min turbo compared to the 8 blade which only flows 52lbs per minute. A member on Evom was running a smaller 8 blade on a stock block evo and ran 11.5s at 125mph on pump gas. Imagine what the bigger 7 blade would've done. The bullseye power housing costs ~ $280 shipped new all by itself.
Turbo-
-Holset HX35 7 blade compressor wheel turbo w/ BEP t3 .70ar 3" vband turbine housing vht coated (Turbo Only, no lines/couplers/clamps/flanges, etc) - SOLD
Thanks,
Sean
five 0 five 720-9702
http://i304.photobucket.com/albums/nn198/3bar_dc2/05%20EVO%208%20EB/Turbowmani.jpg
http://i304.photobucket.com/albums/nn198/3bar_dc2/05%20EVO%208%20EB/hx35.jpg
The 7 blade is a 60 lbs/min turbo compared to the 8 blade which only flows 52lbs per minute. A member on Evom was running a smaller 8 blade on a stock block evo and ran 11.5s at 125mph on pump gas. Imagine what the bigger 7 blade would've done. The bullseye power housing costs ~ $280 shipped new all by itself.
Turbo-
-Holset HX35 7 blade compressor wheel turbo w/ BEP t3 .70ar 3" vband turbine housing vht coated (Turbo Only, no lines/couplers/clamps/flanges, etc) - SOLD
Thanks,
Sean
five 0 five 720-9702
http://i304.photobucket.com/albums/nn198/3bar_dc2/05%20EVO%208%20EB/Turbowmani.jpg
http://i304.photobucket.com/albums/nn198/3bar_dc2/05%20EVO%208%20EB/hx35.jpg