s13 ka motor/tranny. megan header catco cat n more

[killab18]

Hey whats up. Ok i just swapped in my rb20 into my s14. so got a few things i need to get rid of.
MOTOR IS SOLD!!
First is the motor setup. $300
s14 95 ka24de motor and tranny
-134k miles when pulled
-started and ran every day
-idled perfect
-nothing leaked
only issue i had and i think it was cuz i had 1 tiny electric fan. is if the car sits and idled for like 10mins it would start to get hot. but while driving temps were always low and on point. so to me that tells me my fan sucked balls. haha. i had 1 10" fan in the middle of the radiator.
-tranny shifts smooth. never any grinds
-clutch, its good enough for daily driving. but if you try to launch the car it will slip. so it needs a new clutch.
-ill get more pics of motor as well. here it is in the car though
http://i64.photobucket.com/albums/h196/killab18/CIMG4131.jpg
HEADER IS SOLD!!
Megan Racing Header- $150
-both upper and lower parts
-great condition
-fitment was awesome
-no dents or anything
-used for about 8 months. or like 8k miles
-ill get pics of it outside the car so you can see both parts as well
http://i64.photobucket.com/albums/h196/killab18/CIMG4132.jpg
CAT IS SOLD!!
Catco 3" cat $60
-used for about 8k miles
-also great condition
-ill get pics of this now as well. in this pic its brand new.
http://i64.photobucket.com/albums/h196/killab18/IMG_0923.jpg

S13 toe rods $50
- they are adjustable of course
-dont know brand
-they are yellow and look beefy.
-had no issues on my s13

Subframe collars $50
-red in color.
-aluminum

2 s13 subframes.
-1 is rust free
-1 has the surface rust

300zx front calipers- $150
-believe to be 30mm ones
-aluminum
-pads are worn down some but included
-100% working. i just installed r32 ones 2 weeks ago
-SS braided lines included

z32 bmc. 1 1/16th $50
-new from autzone
-no internal fitting
-i will double check size but im sure thats what it is

KA24DE JGY top feed fuel rail $50
-good condition.
-barb fitting for one side
-otherside a fpr screws in (stock, nismo type, or fpr adapter)
http://i64.photobucket.com/albums/h196/killab18/IMG_0918.jpg
http://i64.photobucket.com/albums/h196/killab18/CIMG4095.jpg

Misc crap
-several s13 dohc valve covers
-several s13 intake manifolds
-several sensors
-brackets for s13 dohc
-2 s13 dohc ecu's
-1 95 s14 ecu
-1 s14 front cross member
-decent stock mounts for ka
-s13 coupe carpet-no rips. grey
-s13 coupe pass tail light
-s13 hood. great condition
-s13 heater cores, blowers, ac crap.
-s13 interior parts.
-s13 gas tank
-s13 brake booster
-s13 stock diff
-alot of s13 random parts from parting out several s13's. if you need something ask and i will check.
-spindles, suspension arms. stock brakes.

i can get pics on request. its cold and dark out right now. if there is pics of something you want just let me know.

you can reach me by email, or phone or pm me

Location is
Mineola, NY 11501

Jay
347-582-6717
[email protected]

[ze12o]

how much for 1 s13 ka24de valve cover? and do you have the headlight covers? the metal ones that's painted body color.

[NMs14.5kouki]

any interest in shipping the ka?

[smokin18]

got any pics of the header??

[ilwhipuras]

do u have the tranny cross member?

[killab18]

$15 plus the shipping for a valve cover. I might have headlight assemblies still. So let me get back to you on that. but if i do have them. they still have the covers on them.

Yes im willing to ship the motor but at buyers expense. and just motor or motor and tranny?

I will get the pics of the header tomorrow.

and yes i have the s14 manual tranny cross member. its attached to the motor still. mount is fine.

[NMs14.5kouki]

I would just need the motor, and all accessories and the harness of course. can ya get me a quote shipped to 87144?

[MJenkins1101]

I am quite interested in the headers and this may sound strange but could i get the window handles from an S13, how much for that shipped to 78228?

[killab18]

haha it doesnt sound strange. its what you need. unfortunately someone came early today and took the doors with everything. lol.

Headers i figure will be around the $30 mark. I will see the smallest box i can get them in.

For the motor. i have a local buyer coming up tomorrow to pick up the motor set. I will update my list if it buys it. with something big like that. i gotta go local first. Just easier to deal with especially with the holidays here.

all pm's replied!!!

[Hatchguy]

How much for one of the s13 ecu's shipped to 35057 and whats the numbers on them?

[killab18]

hey sorry to those who have been waiting on me. snow hit us hard and i snow plow so it was 4 days straight of plowing.

All pm's replied. items that were paid for are shipped out.

as for the ecu. i need to find the other one and get the number for you. When i checked them prior to this they were all for 91+ dohc motors. it just might be an auto. which makes no difference.

[Hatchguy]

Alrighty man just let me know :)