Pure_JDM
12-21-2010, 10:28 AM
Up for sale is my Silvia clipped SR20DET redtop coupe. ANYTHING and everything is up for grabs, although I will not part anything until it has been posted for 2 weeks. I would like to sell the car as a whole, but probably won't due to the lack of 240s in my area (Louisiana). All prices are pretty negotiable, due to the lack of market locally and need for shipping. You are responsible for quoting shipping prices from 70726.
In no particular order....
SR20DET Redtop, FULLY BUILT. The motor cost 2150.00 to import at the time and get it shipped locally. Then it was completely torn down, everything in the rotating assembly (pistons, rods, and crank) was replaced with forged goodies, all race bearings, ARP studs and bolts everywhere, Cometic headgasket, Tomei valve springs and retainers, honed cylinder walls, and professionally assembled. Also put a fresh turbo and tubular manifold on her. I would like to get about 1800 which is less than a third of what was paid. It is DIRTY with a minor front cover leak, but has always had royal purple oil changes, and has less than 20k on the motor since the build.
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010086.jpg
I also have the stock manifold which I will throw in with the motor or if someone else wants it for 20 bucks
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010102.jpg
Brand new OEM NISSAN throwout bearing for 20
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010103.jpg
TurboXS RFL BOV that is seized but with some pbblaster or penetrating oil could be a nice functioning BOV again. In it's current state, 30... want me to fix her, 60... I just don't have time with school and work to mess with much anymore.
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010099.jpg
FAZE 5" Tachometer bought for 120 new, and have NEVER installed it, the wires aren't cut or spliced... 50 bucks, 60 with the install ring.
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010097.jpg
Godspeed FMIC for 60 bucks. No leaks, combs are in decent condition, 150 for the FMIC and Aluminum pre-bent piping and couplers.
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010090.jpg
APEXi intake with filter and Z32 MAF, clean rechargeable filter with plenty of life... 180
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010089.jpg
HKS SSQV BOV NEW IN BOX, have installed it but has literally been on the car for 40 miles. I have the box with everything in it, as well as an aftermarket mounting section of IC piping that I will ship with it for 200 total. This is the "Rare Black Edition".
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010084.jpg
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010083.jpg
KOYO radiator in perfect working condition, no leaks, nor any leak stopper shit in it, just Antifreeze and water for 150, 180 with hoses.
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010080.jpg
Entire Silvia clip, fenders, hood, bumper, lights, grill, etc for 500 bucks. A fair warning, the driver side headlight is missing a tab, and the corner light is as well. these will take fixing or replacing to properly install. The hood has a SMALL corner that is damaged but can EASILY be fixed. Was bondoed by the shop that installed it all a while back. The fenders are slightly damaged at the door jams, but can be straightened out as well.
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010078.jpg
REAL Carbon Fiber One piece bucket with 4 point racing harness installed, you can keep the cheaper harness or replace it with your own. The seat cost me 600 new, but I will sell for 350 due to higher shipping prices. I will also include the side rails for another 80.
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010077.jpg
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010059.jpg
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010058.jpg
Hoshino Impul Pro Mesh (2pc) 15x7 +7 offset 4x114.3!!
Manufacturer: Hoshino Racing
Brand: Impul
Model: Pro Mesh
Size: 15x7
Offset: +7
PCD: 4x114.3
Weight: 15lbs
Gold face
2.5" of lip
Includes all 4 center caps
No tires
These were originally sold by mrmephistopheles (http://zilvia.net/f/members/mrmephistopheles.html) on here 7 years ago for 800 shipped... I would like close to the same. They're 2 piece, have a high demand since they're one of the few nice JDM wheels with an offset that fit 4 x 114.3s. They fit my s13 pretty damn flush if not a slight poke, see for yourself.
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010095.jpg
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010051.jpg
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010052.jpg
I will clean these up before I ship them. The paints in pretty good condition. The lips have minor ships and rash in a few places, but over all are NICE wheels, and rare as hell. I have yet to see another set on the streets or at shows. Not saying they're not out there obviously, but they aren't your average fan boy Motegi's...
Smoked tails 100
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010056.jpg
JVC Head Unit 200w CD player AM/FM photo up-loadable, face detachable, flip down. EVERYTHING works on it and it is ready to plug and play with your nissan... 200
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010075.jpg
Custom dash centerpiece. It's a one-off that I made out of 1/4" wood and fiberglass, that holds an SAFC I, II, or NEO, an APEXi Turbo Timer, a single din CD player, and a 2 1/16" gauge. Made to work with a stock boot, as well. Will take minor modification of the lip on the inside of your dash, I had to drimmel the slightest bit off to make clearance for the CD player, and SAFC housing... 50 bucks
SAFC I... 100 bucks
SAFC II... 150 bucks
APEXi Turbo Timer... 120 bucks
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010070.jpg
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010075.jpg
AEM UEGO 2 1/16" AFR Gauge, 40 miles on her, UNCUT, UNMODIFIED, with the sensor and all, shipped IN THE BOX for 180 to your door.
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010068.jpg
Greddy Profec B-Spec Boost Controller works perfectly, has 2 settings, changeable on the fly with all necessary hardware and components... 250
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010066.jpg
Nardi Deep Dish Corn 330 Steering wheel. Kinda rough, but will sell for 75 with the adapter hub. Pics speak for themselves, sold as is.
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010063.jpg
Triple Gauge pod that mounts to the A pillar with or without automatic seatbelts, 25 bucks...
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010123.jpg
Tein Super Drift Master Coilovers, fully adjustable, all four in great condition with spanner wrenches included for 1000 bucks. Still on car, I have no pics but will remove wheels if buyer is sincerely interested.
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010121.jpg
Rear SILVIA decal, never been used, may need to be sprayed with a spray adhesive to stick. Not sure after all these years of sitting in a garage. 20 bucks, shipped.
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010105.jpg
NEW Walbro 255 FP still in tank, been used for 40 miles, have receipts, will ship for 100 bucks.
More to come... Keep offers in thread, and don't spam my inbox please. I will update the thread daily. Thank you in advance. If prices seem unfair, just state your offer. Worse that happens is I say "no". I'm in no hurry to sell, so don't lowball.
That's over 6500 just in parts. I'll sell the entire car with every extra thing in my garage for it, including a 50 trim, another t2 garrett, and a ton of other random car stuff for 5000. The car is caged.
In no particular order....
SR20DET Redtop, FULLY BUILT. The motor cost 2150.00 to import at the time and get it shipped locally. Then it was completely torn down, everything in the rotating assembly (pistons, rods, and crank) was replaced with forged goodies, all race bearings, ARP studs and bolts everywhere, Cometic headgasket, Tomei valve springs and retainers, honed cylinder walls, and professionally assembled. Also put a fresh turbo and tubular manifold on her. I would like to get about 1800 which is less than a third of what was paid. It is DIRTY with a minor front cover leak, but has always had royal purple oil changes, and has less than 20k on the motor since the build.
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010086.jpg
I also have the stock manifold which I will throw in with the motor or if someone else wants it for 20 bucks
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010102.jpg
Brand new OEM NISSAN throwout bearing for 20
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010103.jpg
TurboXS RFL BOV that is seized but with some pbblaster or penetrating oil could be a nice functioning BOV again. In it's current state, 30... want me to fix her, 60... I just don't have time with school and work to mess with much anymore.
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010099.jpg
FAZE 5" Tachometer bought for 120 new, and have NEVER installed it, the wires aren't cut or spliced... 50 bucks, 60 with the install ring.
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010097.jpg
Godspeed FMIC for 60 bucks. No leaks, combs are in decent condition, 150 for the FMIC and Aluminum pre-bent piping and couplers.
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010090.jpg
APEXi intake with filter and Z32 MAF, clean rechargeable filter with plenty of life... 180
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010089.jpg
HKS SSQV BOV NEW IN BOX, have installed it but has literally been on the car for 40 miles. I have the box with everything in it, as well as an aftermarket mounting section of IC piping that I will ship with it for 200 total. This is the "Rare Black Edition".
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010084.jpg
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010083.jpg
KOYO radiator in perfect working condition, no leaks, nor any leak stopper shit in it, just Antifreeze and water for 150, 180 with hoses.
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010080.jpg
Entire Silvia clip, fenders, hood, bumper, lights, grill, etc for 500 bucks. A fair warning, the driver side headlight is missing a tab, and the corner light is as well. these will take fixing or replacing to properly install. The hood has a SMALL corner that is damaged but can EASILY be fixed. Was bondoed by the shop that installed it all a while back. The fenders are slightly damaged at the door jams, but can be straightened out as well.
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010078.jpg
REAL Carbon Fiber One piece bucket with 4 point racing harness installed, you can keep the cheaper harness or replace it with your own. The seat cost me 600 new, but I will sell for 350 due to higher shipping prices. I will also include the side rails for another 80.
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010077.jpg
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010059.jpg
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010058.jpg
Hoshino Impul Pro Mesh (2pc) 15x7 +7 offset 4x114.3!!
Manufacturer: Hoshino Racing
Brand: Impul
Model: Pro Mesh
Size: 15x7
Offset: +7
PCD: 4x114.3
Weight: 15lbs
Gold face
2.5" of lip
Includes all 4 center caps
No tires
These were originally sold by mrmephistopheles (http://zilvia.net/f/members/mrmephistopheles.html) on here 7 years ago for 800 shipped... I would like close to the same. They're 2 piece, have a high demand since they're one of the few nice JDM wheels with an offset that fit 4 x 114.3s. They fit my s13 pretty damn flush if not a slight poke, see for yourself.
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010095.jpg
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010051.jpg
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010052.jpg
I will clean these up before I ship them. The paints in pretty good condition. The lips have minor ships and rash in a few places, but over all are NICE wheels, and rare as hell. I have yet to see another set on the streets or at shows. Not saying they're not out there obviously, but they aren't your average fan boy Motegi's...
Smoked tails 100
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010056.jpg
JVC Head Unit 200w CD player AM/FM photo up-loadable, face detachable, flip down. EVERYTHING works on it and it is ready to plug and play with your nissan... 200
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010075.jpg
Custom dash centerpiece. It's a one-off that I made out of 1/4" wood and fiberglass, that holds an SAFC I, II, or NEO, an APEXi Turbo Timer, a single din CD player, and a 2 1/16" gauge. Made to work with a stock boot, as well. Will take minor modification of the lip on the inside of your dash, I had to drimmel the slightest bit off to make clearance for the CD player, and SAFC housing... 50 bucks
SAFC I... 100 bucks
SAFC II... 150 bucks
APEXi Turbo Timer... 120 bucks
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010070.jpg
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010075.jpg
AEM UEGO 2 1/16" AFR Gauge, 40 miles on her, UNCUT, UNMODIFIED, with the sensor and all, shipped IN THE BOX for 180 to your door.
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010068.jpg
Greddy Profec B-Spec Boost Controller works perfectly, has 2 settings, changeable on the fly with all necessary hardware and components... 250
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010066.jpg
Nardi Deep Dish Corn 330 Steering wheel. Kinda rough, but will sell for 75 with the adapter hub. Pics speak for themselves, sold as is.
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010063.jpg
Triple Gauge pod that mounts to the A pillar with or without automatic seatbelts, 25 bucks...
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010123.jpg
Tein Super Drift Master Coilovers, fully adjustable, all four in great condition with spanner wrenches included for 1000 bucks. Still on car, I have no pics but will remove wheels if buyer is sincerely interested.
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010121.jpg
Rear SILVIA decal, never been used, may need to be sprayed with a spray adhesive to stick. Not sure after all these years of sitting in a garage. 20 bucks, shipped.
http://i1102.photobucket.com/albums/g443/kolekindschuh/December2010105.jpg
NEW Walbro 255 FP still in tank, been used for 40 miles, have receipts, will ship for 100 bucks.
More to come... Keep offers in thread, and don't spam my inbox please. I will update the thread daily. Thank you in advance. If prices seem unfair, just state your offer. Worse that happens is I say "no". I'm in no hurry to sell, so don't lowball.
That's over 6500 just in parts. I'll sell the entire car with every extra thing in my garage for it, including a 50 trim, another t2 garrett, and a ton of other random car stuff for 5000. The car is caged.