yoozef
12-20-2010, 04:39 PM
Ok, so i went to buy a few parts and ended up picking up the entire thing, and i don't really need it, so i'm parting it out:
- S14 SR20DET short block, sleeved, stock 86mm, looks good and turns with no knock, the only thing i noticed were wrong with it is that the upgraded metal chain guide (the arched one) does not have the plastic piece of it and there are minimal scuffs on top of the pistons (the intake valves hit the pistons). There's also some slight pitting on top of the cylinder walls, but shouldn't be a problem. Complete minus water pump pulley - $450 picked up
http://i29.photobucket.com/albums/c276/dzerek/DSC02641.jpg
http://i29.photobucket.com/albums/c276/dzerek/DSC02642.jpg
http://i29.photobucket.com/albums/c276/dzerek/DSC02643.jpg
Please note i was trying to clean up the pistons to show the damage, but it's way too freaking cold and it turned to ice, but you get the idea, also note the missing plastic on the arched timing chain guide:
http://i29.photobucket.com/albums/c276/dzerek/DSC02645.jpg
-s14 sr transmission (http://zilvia.net/f/#), includes pivot fork, and tob SOLD
- transmission gasket $30
http://i29.photobucket.com/albums/c276/dzerek/DSC02649.jpg
- s14 head with BC springs/retainers, intake side valves are bent, exhaust side looks ok, but might need new valves too, doesn't come with the water neck, no lifters, does come with cam caps (i think i have all the bolts) $250
- a set of lifters $80
- i also have 5 rocker arms, so if you're missing some, i can sell them piece by piece ($15 a pop, $10 each after that)
- oil tubes $20 for a pair
- oem timing chain tensioner $30
- used arp headstuds (i think i misplaced 1 nut, but i think i have some extras) $40
http://i29.photobucket.com/albums/c276/dzerek/DSC02650.jpg
- s14 valve cover $80, or 50 if purchased with the head
- Stage 3 S14 SR20 BC0206 cams 272/272 12.55 lift, exhaust side comes with he cam gear, $260
- Stage 2 S14 SR20 BC0205 cams 264/264 12.06 lift, no cam gears, some slight scuffs on them, but still very usable $150 SOLD
http://i29.photobucket.com/albums/c276/dzerek/DSC05874.jpg
- buy either set of cams and get the HKS springs (no markings on them, but i was told these are 100% HKS springs) for free or if you want just the springs $40
- VTC cam gear solenoid, good condition, gets rid of the noise if your NVCS is shot $80
- xspower top mount exhaust manifold (http://zilvia.net/f/#), looks like it's ceramaic coated $50
http://i29.photobucket.com/albums/c276/dzerek/DSC02651.jpg
http://i29.photobucket.com/albums/c276/dzerek/DSC02652.jpg
http://i29.photobucket.com/albums/c276/dzerek/DSC02653.jpg
- S14 Alternator with brackets $50
If you need anything else, ask, i might part if there's interest in individual parts, pics will follow, i'm also willing to deliver bigger items for gas $$ within 50 mile radius from 10598, thanks
- S14 SR20DET short block, sleeved, stock 86mm, looks good and turns with no knock, the only thing i noticed were wrong with it is that the upgraded metal chain guide (the arched one) does not have the plastic piece of it and there are minimal scuffs on top of the pistons (the intake valves hit the pistons). There's also some slight pitting on top of the cylinder walls, but shouldn't be a problem. Complete minus water pump pulley - $450 picked up
http://i29.photobucket.com/albums/c276/dzerek/DSC02641.jpg
http://i29.photobucket.com/albums/c276/dzerek/DSC02642.jpg
http://i29.photobucket.com/albums/c276/dzerek/DSC02643.jpg
Please note i was trying to clean up the pistons to show the damage, but it's way too freaking cold and it turned to ice, but you get the idea, also note the missing plastic on the arched timing chain guide:
http://i29.photobucket.com/albums/c276/dzerek/DSC02645.jpg
-s14 sr transmission (http://zilvia.net/f/#), includes pivot fork, and tob SOLD
- transmission gasket $30
http://i29.photobucket.com/albums/c276/dzerek/DSC02649.jpg
- s14 head with BC springs/retainers, intake side valves are bent, exhaust side looks ok, but might need new valves too, doesn't come with the water neck, no lifters, does come with cam caps (i think i have all the bolts) $250
- a set of lifters $80
- i also have 5 rocker arms, so if you're missing some, i can sell them piece by piece ($15 a pop, $10 each after that)
- oil tubes $20 for a pair
- oem timing chain tensioner $30
- used arp headstuds (i think i misplaced 1 nut, but i think i have some extras) $40
http://i29.photobucket.com/albums/c276/dzerek/DSC02650.jpg
- s14 valve cover $80, or 50 if purchased with the head
- Stage 3 S14 SR20 BC0206 cams 272/272 12.55 lift, exhaust side comes with he cam gear, $260
- Stage 2 S14 SR20 BC0205 cams 264/264 12.06 lift, no cam gears, some slight scuffs on them, but still very usable $150 SOLD
http://i29.photobucket.com/albums/c276/dzerek/DSC05874.jpg
- buy either set of cams and get the HKS springs (no markings on them, but i was told these are 100% HKS springs) for free or if you want just the springs $40
- VTC cam gear solenoid, good condition, gets rid of the noise if your NVCS is shot $80
- xspower top mount exhaust manifold (http://zilvia.net/f/#), looks like it's ceramaic coated $50
http://i29.photobucket.com/albums/c276/dzerek/DSC02651.jpg
http://i29.photobucket.com/albums/c276/dzerek/DSC02652.jpg
http://i29.photobucket.com/albums/c276/dzerek/DSC02653.jpg
- S14 Alternator with brackets $50
If you need anything else, ask, i might part if there's interest in individual parts, pics will follow, i'm also willing to deliver bigger items for gas $$ within 50 mile radius from 10598, thanks