waste_of_space
12-19-2010, 09:15 PM
I'm open to trades for certain parts, so just let know what you have!
FEELER (I may run this, cause it's so awesome looking)
Brand new Yashio Factory oversized water pump pulley, hopefully this shouldn't need much more of a description (it even comes with a yashio factory sticker!) : $145
http://i54.tinypic.com/fzbuwk.jpg
An ALMOST fully complete (missing a single sensor!) s13 digital climate control swap.
This setup is plug and play (just gotta connect two wires to power)
IT'S MISSING THE JDM HVAC/AIR MIX MOTOR! everything else is there!
$150
http://i53.tinypic.com/11aahkh.jpg
FEELER: Greddy/trust t517z turbo!
T2 flanged, internally wastegated turbo, good for 380 hp (8cm exhaust housing). It's journal bearing and OIL COOLED ONLY (still has awesome response)
I bought it used with less then 500 miles on it, and haven't used it (literally has ZERO shaftplay, interested parties are definitely welcome to come check it out)
This is just the turbo itself for sale!
$675, and I'm not in a rush to sell this, as I'll probably use it myself as soon as I get my other coupe up and running again.
http://i54.tinypic.com/t8tgkh.jpg
Here's more info on it from GReddy's site.
GReddy (http://www.greddy.com/products/turbochargers/turbochargers-misc./filter:model:T517Z/)
And here's a brand new one: Greddy - Turbo Kit - Silvia - T517Z - Nengun Performance (http://www.nengun.com/trust-greddy/turbo-kit-silvia-t517z)
plug and play sr20 into s13 chassis harness (redtop/early blacktop motor)
everything was functional, but the o2 sensor plug will need to be rewired (or you could just use your wideband to simulate the o2 sensor signal). All dash gauges and what not worked, I'm not sure if the AC did or not, as I wasn't running AC in my car (http://zilvia.net/f/#). Includes q45 ignitor, this is a direct drop in harness to get your motor swap running! $140
http://i54.tinypic.com/o008m.jpg
Gizzmo MS-IBC electronic boost controller, brand new, never used, 225 shipped:
The Gizzmo MS-IBC is the competition boost controller for the serious enthusiast. In developing the MS-IBC, out aim was to design a boost controller that would cater to the serious drag racing professional while still being quite at home on the streets. Gizzmo's Multi-Scramble IBC takes the conventional scramble one step further.
A conventional scramble function allows the user, upon the push of a button, to run higher boost for a temporary period (e.g. 2lbs extra for 5 seconds). Gizzmo's Multi-Scramble function allows the user the option of again pressing the button before the scramble time has completed to add the same amount of boost again and refresh the original time duration.
The Gizzmo MS-IBC Boost Controller is packed with all of the features required for competition while still being a great looking controller that is easy to use and install.
CONCEPT:
The MS-IBC is the competition boost controller for the serious enthusiast.
CHARACTERISTICS:
* Adjustable up to 50lb (3.5 bar) * Selectable open/closed loop boost control * Remote scramble/boost memory facility * Real time digital boost gauge * 40mhz high speed RISC processor * Extruded aluminum case * Multi-scramble boost * Over boost warning * 6 boost memories * Simple 2-wire installation * Suits internal and external wastegates * Comes with all installation accessories
http://tunertools.com/prodimages/Gizzmo/2661.jpg
Full set of (4) stock sr20det injectors, 370cc.
They don't have pintle caps! But still work fine.
http://i36.tinypic.com/207tjt5.jpg
Asking $50
Someone come and get these, $30 each!
Each board will come with 2 chips (you'll need someone to set you up with a tune, though)
SR20DET boards (redtop/black top; not s14 sr motor; not type x sr motor) and I THINK they will work with KA motors
I've got 2 of them left
http://i44.tinypic.com/263fyx0.jpg
Fairlady Z, turbo boards (Z32); will also work on s14 sr motors! I have two of them.
http://i39.tinypic.com/24dopk3.jpg
Newer SR20DET board (type x motor, s15 motor, s14 motor)
http://i39.tinypic.com/5wl9a8.jpg
brand new, still in the box glowshift red digital gauges.
Oil temperature, and oil pressure. And a barely used matching water temp gauge
These are all complete, with all necessary wires and sensors.
I was gonna run these in my coupe (http://zilvia.net/f/#), but it got totaled and now I'm going to go a different route.
TEMP READS IN DEGREES CELSIUS AND PRESSURE IS IN BAR!!!
$120 for all 3 gauges!
http://i54.tinypic.com/icphle.jpg
http://i54.tinypic.com/4zyic8.jpg
FEELER (I may run this, cause it's so awesome looking)
Brand new Yashio Factory oversized water pump pulley, hopefully this shouldn't need much more of a description (it even comes with a yashio factory sticker!) : $145
http://i54.tinypic.com/fzbuwk.jpg
An ALMOST fully complete (missing a single sensor!) s13 digital climate control swap.
This setup is plug and play (just gotta connect two wires to power)
IT'S MISSING THE JDM HVAC/AIR MIX MOTOR! everything else is there!
$150
http://i53.tinypic.com/11aahkh.jpg
FEELER: Greddy/trust t517z turbo!
T2 flanged, internally wastegated turbo, good for 380 hp (8cm exhaust housing). It's journal bearing and OIL COOLED ONLY (still has awesome response)
I bought it used with less then 500 miles on it, and haven't used it (literally has ZERO shaftplay, interested parties are definitely welcome to come check it out)
This is just the turbo itself for sale!
$675, and I'm not in a rush to sell this, as I'll probably use it myself as soon as I get my other coupe up and running again.
http://i54.tinypic.com/t8tgkh.jpg
Here's more info on it from GReddy's site.
GReddy (http://www.greddy.com/products/turbochargers/turbochargers-misc./filter:model:T517Z/)
And here's a brand new one: Greddy - Turbo Kit - Silvia - T517Z - Nengun Performance (http://www.nengun.com/trust-greddy/turbo-kit-silvia-t517z)
plug and play sr20 into s13 chassis harness (redtop/early blacktop motor)
everything was functional, but the o2 sensor plug will need to be rewired (or you could just use your wideband to simulate the o2 sensor signal). All dash gauges and what not worked, I'm not sure if the AC did or not, as I wasn't running AC in my car (http://zilvia.net/f/#). Includes q45 ignitor, this is a direct drop in harness to get your motor swap running! $140
http://i54.tinypic.com/o008m.jpg
Gizzmo MS-IBC electronic boost controller, brand new, never used, 225 shipped:
The Gizzmo MS-IBC is the competition boost controller for the serious enthusiast. In developing the MS-IBC, out aim was to design a boost controller that would cater to the serious drag racing professional while still being quite at home on the streets. Gizzmo's Multi-Scramble IBC takes the conventional scramble one step further.
A conventional scramble function allows the user, upon the push of a button, to run higher boost for a temporary period (e.g. 2lbs extra for 5 seconds). Gizzmo's Multi-Scramble function allows the user the option of again pressing the button before the scramble time has completed to add the same amount of boost again and refresh the original time duration.
The Gizzmo MS-IBC Boost Controller is packed with all of the features required for competition while still being a great looking controller that is easy to use and install.
CONCEPT:
The MS-IBC is the competition boost controller for the serious enthusiast.
CHARACTERISTICS:
* Adjustable up to 50lb (3.5 bar) * Selectable open/closed loop boost control * Remote scramble/boost memory facility * Real time digital boost gauge * 40mhz high speed RISC processor * Extruded aluminum case * Multi-scramble boost * Over boost warning * 6 boost memories * Simple 2-wire installation * Suits internal and external wastegates * Comes with all installation accessories
http://tunertools.com/prodimages/Gizzmo/2661.jpg
Full set of (4) stock sr20det injectors, 370cc.
They don't have pintle caps! But still work fine.
http://i36.tinypic.com/207tjt5.jpg
Asking $50
Someone come and get these, $30 each!
Each board will come with 2 chips (you'll need someone to set you up with a tune, though)
SR20DET boards (redtop/black top; not s14 sr motor; not type x sr motor) and I THINK they will work with KA motors
I've got 2 of them left
http://i44.tinypic.com/263fyx0.jpg
Fairlady Z, turbo boards (Z32); will also work on s14 sr motors! I have two of them.
http://i39.tinypic.com/24dopk3.jpg
Newer SR20DET board (type x motor, s15 motor, s14 motor)
http://i39.tinypic.com/5wl9a8.jpg
brand new, still in the box glowshift red digital gauges.
Oil temperature, and oil pressure. And a barely used matching water temp gauge
These are all complete, with all necessary wires and sensors.
I was gonna run these in my coupe (http://zilvia.net/f/#), but it got totaled and now I'm going to go a different route.
TEMP READS IN DEGREES CELSIUS AND PRESSURE IS IN BAR!!!
$120 for all 3 gauges!
http://i54.tinypic.com/icphle.jpg
http://i54.tinypic.com/4zyic8.jpg