project blackout
12-19-2010, 02:22 PM
ok heres the deal, i had this wonderful BS shop JE import performance put a rb26 in my 89 s13. it ran great till the clutch fried 3 weeks after i got the car back. i have had problems with it every since then. the problem im running into now is the car started for 5 min and then choked its self out and now it wont start. i did a water pump about 3 weeks ago and the car ran great. the time is on the dot. im getting proper spark from every where. im getting good volts from the battey, im getting fuel. the injectors and pump are working great. all the fuses are good and are getting power, i have a power FC in it. but the shop failed to give me the hand controler or laptop hook up. does any1 local in the harford/baltimore area have one i can use to run the ecu, or any ideas, im at a complete loss on this and im loosing my mind. and i have done my research, but reading can only go so far. i need some1 with the knowledge that has something even close to this happen. HELP!!!!. if for any reason no 1 responce to this thread, at least email me with any help at [email protected] ([email protected]) http://forums.nicoclub.com/images/smilies/wtf.gif