s13 silvia triple projector low beams

[newlovekid]

what do i need to buy for this to all work out?
it has nothing... no bulb or adaptor for the bulb. is it hard to find?

http://i11.photobucket.com/albums/a161/pigpen91/1214101642a.jpg

[Sileighty_85]

What do you mean adapter?

looks like your just missing the Rubber weather boot
The harness looks like it there just missing a wire (a red one) on the female plug

[S-Nation S13]

not to jack you thread, but what beam is that? i installed mine and the middle one and fog are operrational, but the outer ones dont work i try to turn on hi beam and they still dont work so im assuming those are my hi's?

[japslapsilvia]

there is a bulb holder there for the H1 bulb.....idk where you would find that, maybe check classified here or yaj

[SaNTi]

not to jack you thread, but what beam is that? i installed mine and the middle one and fog are operrational, but the outer ones dont work i try to turn on hi beam and they still dont work so im assuming those are my hi's?

That's the low beam.

[ROOSEY]

^+1. correct me if im wrong but i believe all or most cars have the low beams on the outside and highs on the inside.

[ILLES13]

Sorry to thread jack, but i was wondering. I have the dual projectors, and i'm running 4300k hid's in them. I have the most horrible output ever, even after trying to adjust them. Is that just how the projectors are? what gives

[srstan]

Sorry to thread jack, but i was wondering. I have the dual projectors, and i'm running 4300k hid's in them. I have the most horrible output ever, even after trying to adjust them. Is that just how the projectors are? what gives

yup all silvia headlights are shitty....Clear corners has a conversion kit that you can buy to make the light output correct.

[jacobs13]

those are my old lights, and yes its a little rubber thing, i found them in my driveway yesterday. OP call me and I will give them to you

[kevmeistah21]

Sorry to thread jack, but i was wondering. I have the dual projectors, and i'm running 4300k hid's in them. I have the most horrible output ever, even after trying to adjust them. Is that just how the projectors are? what gives


all silvia light outputs suck dick..

yup all silvia headlights are shitty....Clear corners has a conversion kit that you can buy to make the light output correct.


cheaper to go with tsx projectors.

[newlovekid]

the female plug goes onto the low beams and the male plug connects to the light switch on your car.
middle light is high beam and the outter light is the low beam.. its all plug and play if everything is there.. but im missing the low beam so its not for me :( ha

so if i buy HID's i dont have to worry about that adaptor?

[S-Nation S13]

so the middle lights are hi beam and the outer lights are the lows? wth, when i switch to normal head lights the middle lighs up, when i switch to hi the mid come off and nothing lights up so i thought my high were blown out ?

[Sileighty_85]

Outsides are Low's middles are High's

The Male & female plug together for the Low's and High's, Fog Lights use their own harness.

I show in here how the plug should be wired up (there is a bonus wire up for the Q's Lights)
http://zilvia.net/f/tech-talk/276805-s13-kouki-tail-wire-up.html

[newlovekid]

well idk maybe your headlights are like that.. when i put my low beams i get nothing, but when i put it on high beams it lights up in the middle

[Sileighty_85]

well idk maybe your headlights are like that.. when i put my low beams i get nothing, but when i put it on high beams it lights up in the middle

somthing is Jacked up in your wiring then, Maybe your Head Light Stalk switch needs to be replaced.

All S13 Silvia lights use the same config. (outside Low's, Middle's High)
Low's
http://i73.photobucket.com/albums/i235/Neil_85/Misc/PIC-0162.jpg

[newlovekid]

no my lights are right ha my high beams are middle.. hey if i replace Head Light Stalk switch would it fix my high beams cause only my passenger side light works when highs are on.. its been like that even when i had my pop up lights

[S-Nation S13]

wth? i thought it was plug and play hm....from usdm to triple project with the exception of the fogs

[Sileighty_85]

no my lights are right ha my high beams are middle.. hey if i replace Head Light Stalk switch would it fix my high beams cause only my passenger side light works when highs are on.. its been like that even when i had my pop up lights

Sounds like a Stalk issue.

wth? i thought it was plug and play hm....from usdm to triple project with the exception of the fogs

I cant remember, My Silvia harness was Cut so that why I had to solder mine and made that write up, JIC someone else had this issue

[S-Nation S13]

i have a set of h4 bulbs ill plug it into the harness if my harness is legit, lo and hi should work fine if it does, then i guess its my silvia lights that are messed up

[S-Nation S13]

sileighty 85 what bulbs are you using ? for all three please

[S-Nation S13]

my lights are now all operational, proper. so with that being said, how do you adjust the beams itself?

[S-Nation S13]

to fig outthis problem here you go your missing the black piece, its the bulb holder changes the 1 prong h1 into a 3 prong h1
http://www.streetfx.com.au/product_images/hids/s13/hid5.JPG

[Sileighty_85]

sileighty 85 what bulbs are you using ? for all three please

Im using whatever the headlights use stock

Its been awhile but i think its
LB- H3C
HB- H3
Fog- H3C

[SaNTi]

Im using whatever the headlights use stock

Its been awhile but i think its
LB- H3C
HB- H3
Fog- H3C

Low beams are H1.

[Sileighty_85]

Low beams are H1.

That right, I forgot hes got K's Lights.
I got Q's so mine uses H3C

[newlovekid]

alright i got the adaptor for it but it has no 3 prong.. its empty like the previous used hid soo im forced to get hids now

[S-Nation S13]

if you go to the link on the bottom of the pic, they did an hid install so if you need help go there

[S-Nation S13]

thanks sil 85, i inspected mine and i used the same lights as you except for the low lol

[aalbert240]

if you go to the link on the bottom of the pic, they did an hid install so if you need help go there
can you send me the web page address im having trouble finding the hid install page thanks

[S-Nation S13]

S13 Silvia Hid H1 Headlight Conversion With Pics - Boostcruising (http://www.boostcruising.com/forums/index.php?showtopic=464432)

dont know if the install is product specific but here you go

[loketran]

to fig outthis problem here you go your missing the black piece, its the bulb holder changes the 1 prong h1 into a 3 prong h1
http://www.streetfx.com.au/product_images/hids/s13/hid5.JPG

where do i get that bulb holder for my hid kit? its missing that piece and wont fit in my lowbeams

[Sileighty_85]

Nissan art number
26067-52F00-


http://i73.photobucket.com/albums/i235/Neil_85/FAST/Kslight.jpg

[loketran]

Nissan art number
26067-52F00-


http://i73.photobucket.com/albums/i235/Neil_85/FAST/Kslight.jpg

where do i get them ?

[Sileighty_85]

try a dealership or contact Russell @ Nissanparts.cc

[lbogkush]

i think this is what you need
2 x HID H1 Bulbs Adapter Holders for Benz 320 with H1 Halogen | eBay (http://www.ebay.com/itm/2-x-HID-H1-Bulbs-Adapter-Holders-For-Benz-320-With-H1-Halogen-/360500174239?pt=Motors_Car_Truck_Parts_Accessories&hash=item53ef7c1d9f&vxp=mtr)

[loketran]

i think this is what you need
2 x HID H1 Bulbs Adapter Holders for Benz 320 with H1 Halogen | eBay (http://www.ebay.com/itm/2-x-HID-H1-Bulbs-Adapter-Holders-For-Benz-320-With-H1-Halogen-/360500174239?pt=Motors_Car_Truck_Parts_Accessories&hash=item53ef7c1d9f&vxp=mtr)

wow thanks, they shud work for silvia right?

[loketran]

says theyre for a benz

[lbogkush]

wow thanks, they shud work for silvia right?

i think so and if u do use hid the blub doesnt come with the clip holder like the halogen do and the adapter has the clip built in so it be great for hid's but idk really i was thinking of doing this to my triple with hid but then i got bricks so i left it alone :)

[lbogkush]

says theyre for a benz

they looked the same when compared to my stock triple bulb holder just this one has clips built in idk really like i said i think.
jdm stuff is weird or maybe its just the u.s. IDK

[loketran]

ahh, what do you think about these 2pcs HID Xenon H1 Bulb Holders Adapters for Benz 320 | eBay (http://www.ebay.com/itm/2PCS-HID-Xenon-H1-Bulb-Holders-Adapters-For-Benz-320-/270915129253?pt=Motors_Car_Truck_Parts_Accessories&hash=item3f13cccfa5&vxp=mtr)

[lbogkush]

samething or maybe the ones i posted is plastic which i doubt i think there just painted black