FS: BBS RD (4), 15x7, ET25, 4x114.3. $550+ship

[asynchron]

Hey all, I was referred here from VWVortex as a good place to get some nice 4x114.3 wheels sold.

So I bought these in the 4x108 forum on VWVortex. It turns out the guy got them for a 4x100 car, saw they were too big, and just automatically concluded that they were 4x108. What a tool. :facepalm:

All straight, 4 caps included, clear coat is a little spidery and there's a chip here and there, but it's 98% intact and not yellowing. The spidering isn't as bad as it looks in the pics....I had the flash on. :P No curbage, no pitting. I'd call these an 8 or 9 out of ten.

$550 plus shipping firm.

http://i192.photobucket.com/albums/z62/asynchron/DSCN1071-1.jpg
http://i192.photobucket.com/albums/z62/asynchron/DSCN1076.jpg
http://i192.photobucket.com/albums/z62/asynchron/DSCN1075.jpg
http://i192.photobucket.com/albums/z62/asynchron/DSCN1074.jpg
http://i192.photobucket.com/albums/z62/asynchron/DSCN1073.jpg

[asynchron]

Bump....I wanna get these sold.
:wcc:

[mikerbike]

http://i192.photobucket.com/albums/z62/asynchron/DSCN1076.jpg

Um.. That tape measure says the wheel is 4x108 too. The center of the hole on the left is right on the 1/2" mark. The center of the hole on the right is right on the 4 and 3/4" mark.

4.75 - 0.5 = 4.25

4.25" = 108mm

Unless I'm seeing it at a funny angle. Glws.

[asynchron]

Um.. That tape measure says the wheel is 4x108 too. The center of the hole on the left is right on the 1/2" mark. The center of the hole on the right is right on the 4 and 3/4" mark.

4.75 - 0.5 = 4.25

4.25" = 108mm

Unless I'm seeing it at a funny angle. Glws.

Ah, it's parallax on the left side. the end of the tape measure is exactly on the left edge of the hole, but because of the little hook on the end of it, and taking a closeup picture, it appears to be off to the left.

Thanks for the tip though....I'll take a better pic of the measurement and get it uploaded here pretty soon.