PDA

View Full Version : UT FS / FT my "bumped when updated" FS/FT thread.


wrxkyle
12-10-2010, 09:55 AM
FS / FT greddy oilpan, bc 264 cam, n62 maf with pigtails, avcr/safc, misc sr parts

like the title says; obo

greddy (real) oilpan for sr20 $250

bc 264 camshaft (only 1, the other was trash and for an s13, got screwed by the seller), $100
it's for an s14 but will work 100% fine in s13sr as well- verified by Brian Crower in my other thread.

low miles n62 maf with pigtail SOLD

willing to trade or sell 740cc jecs injectors (company that makes khs, among others, i was told they were hks 740cc's but part numbers on the injectors just say jecs) for 850cc deatchworks, or 1000cc+ five0 subaru sidefeeds, otherwise will just run e85 on jecs.
speaking of which i need jecs sr20 injector plugs, just the plastic injector connector so i can slap em on the subaru wires and not need to splice anything
will sell for $400 obo

i also have an avcr that works perfectly but doesn't have map sensor, $200 shipped obo

safc poweres on normal and everything but never installed in car only bench tested so i have no idea if it works correctly, i did an enthalpy tune instead of using it. $75 obo SOLD

both safc and avcr have all wires, and are slightly scratched but not bad, and you could polish them up with headlight restore or similar if you really care.
i'm sure i'm forgetting somethings i have but will just add to the post

ignitor $25

tension rods- SOLD no time to google what these go for let me know if it's unreasonable

somewhere around here i have an enthalpy ecu that does not work, car doesn't start with it. i'll try and look up what the tune was for, could just be that the tune had big injectors and i didn't, but don't know, obo. you could always send it into enthalpy to fix it up at the same time he does your new tune. due to the inability to test it i'm willing to let it go fairly cheap. it has no evidence of any kind of damage, no water damage, no burnt out components, nothing. enthalpy can do dual tunes now btw, one for race gas and one for pump!

willing to consider trades and trades+cash for subaru performance items, sold the silvia and got an 04 sti (well swapped bugeye 02wrx but other than body it's an 04 all around.)


for the suby i need rear sway bar,
f&r endlinks,
amber electronic gauges (boost, oilpress, wideband, egt... prosport, defi, stri, maddad, etc, sti gauge red-amber color)
20g turbo
tmic inter-cooler silicone elbow
02-03 jdm sti hoodscoop and splitter
jdm 3 piece grill
sti trunk spings
bigger injectors (currently have 740's)
hid projector housings (like from a tsx, s2000, etc, just housing not ballast/bulbs)
pics to follow

pics: for sale pictures by wrxkyle - Photobucket (http://s683.photobucket.com/albums/vv192/wrxkyle/for%20sale/)

http://i683.photobucket.com/albums/vv192/wrxkyle/for%20sale/IMG_0660.jpg
http://i683.photobucket.com/albums/vv192/wrxkyle/for%20sale/IMG_0685.jpg
http://i683.photobucket.com/albums/vv192/wrxkyle/for%20sale/IMG_0684.jpg
http://i683.photobucket.com/albums/vv192/wrxkyle/for%20sale/IMG_0683.jpg
http://i683.photobucket.com/albums/vv192/wrxkyle/for%20sale/IMG_0681.jpg
http://i683.photobucket.com/albums/vv192/wrxkyle/for%20sale/IMG_0673.jpg
http://i683.photobucket.com/albums/vv192/wrxkyle/for%20sale/IMG_0672.jpg
http://i683.photobucket.com/albums/vv192/wrxkyle/for%20sale/IMG_0671.jpg
http://i683.photobucket.com/albums/vv192/wrxkyle/for%20sale/IMG_0669.jpg
shown is a tiny nick on the inner side of the oil pan face, it won't cause any leaks or problems but i like to be 100% transparent on sales so you see what you're actually getting
http://i683.photobucket.com/albums/vv192/wrxkyle/for%20sale/IMG_0668.jpg
http://i683.photobucket.com/albums/vv192/wrxkyle/for%20sale/IMG_0665.jpg
http://i683.photobucket.com/albums/vv192/wrxkyle/for%20sale/IMG_0666.jpg
http://i683.photobucket.com/albums/vv192/wrxkyle/for%20sale/IMG_0664.jpg
a shot of the inner casting here too, it's real greddy not some china knockoff with sand in the casting to eat your engine.
http://i683.photobucket.com/albums/vv192/wrxkyle/for%20sale/IMG_0663.jpg
http://i683.photobucket.com/albums/vv192/wrxkyle/for%20sale/IMG_0661.jpg

all prices obo. lots of interest in maf, oilpan, tension rods, and injectors. first to come up with the cash gets em.

cobb acessport v2 for 2004 sti (will work with others) for sale as well, and i'm looking for a tactrix cable. $475 for the ap. willing to give a much better deal if you have a taxtrix cable to trade with cash.

wrxkyle
12-10-2010, 09:56 AM
reserved for updates and pics since this will by my one thread i just edit and update

wrxkyle
12-10-2010, 09:56 AM
reserved for updates and pics since this will by my one thread i just edit and update

dudermagee
12-10-2010, 10:14 AM
you do realize that you only get 2 bumps and you just used them right?

smokin18
12-10-2010, 10:20 AM
sent ya a pm i also have some rear spats

wrxkyle
12-10-2010, 12:42 PM
you do realize that you only get 2 bumps and you just used them right?

they arn't bumps if you post them all in 3 mins, if you would rather have me clog the forum with a new for sale thread every effin week then i will, this is cleaner and easier for everyone.

but this isn't an argument, pm a mod if you would like and have them give me their opinion on it but i think this is a much better approach to the fs thread.

wrxkyle
12-14-2010, 12:13 PM
alright some more to add to the list, updating first post as well. i have some pillow-ball tension rods for an s13 in good condition.

i have an igniter chip for an s13 that's in good condition.

jbl 6x9 speakers gto series i believe 3 way, sound great, haven't used em in years though since all my cars since the Camry use round speakers, obo, looking for anything reasonable, and super cheap to a local utah county area picked up.

wrxkyle
01-01-2011, 07:54 PM
bumpity, safc is spoken for and pending

S-Nation S13
01-01-2011, 08:43 PM
what size spacers are thoses ? pm me if you still got em

Okinawandrifter87
01-02-2011, 02:30 AM
How much for the greddy oil pan shipped to 29904? Thanks.

Toi
01-02-2011, 05:25 AM
If Okinawadrifter doesn't get the oil pan, shoot me a PM. We can work a deal on trades, I can get the Suby stuff here in Japan!

Okinawandrifter87
01-02-2011, 06:27 AM
Sent you a P.M.

Vatche
01-02-2011, 01:44 PM
i love your idea to update and bump. and its been talked about. but the rules state 2 bumps per thread no matter what and they close your thread right away.

and you would have to make a new thread 3 days later. blah blah. so keep that in mind.

glws.

wrxkyle
01-07-2011, 10:34 AM
toi- doesn't look like okenawa will be getting the oilpan just the maf. i don't have time to try and read japenese auctions and search them in english, but as far as trades go i would be looking for the hoodscoop, splitter, and grill. otherwise you can buy it for cash/paypal and i'll ship. are you in japan or just have access to japan? shipping might be a bit steep.

sils1307
01-08-2011, 09:38 AM
is the safc still available? If so how much shipped to 32164?

wrxkyle
01-08-2011, 06:14 PM
sorry safc II is sold.

wrxkyle
01-13-2011, 05:14 PM
safc sold tension rods SOLD MAF SOLD INJECTORS SEMI-PENDING (friend wants them but first to show me the Benjamens wins)

smokin18
01-13-2011, 05:26 PM
i still have the subie parts we talked about......

Okinawandrifter87
01-13-2011, 05:47 PM
MAF is sold as well.

wrxkyle
01-20-2011, 11:47 AM
injectors sold

ThatGuy
01-20-2011, 01:06 PM
Too many bumps.

:lockd: