jr_ss
12-08-2010, 08:31 PM
Alright, I'm over SR's. I want something with more potential then this motor. I'm parting everything out. Everything was bought brand new and ran for 2.5k miles unless otherwise noted. I'll discount for multiple things bought. If you have any questions please feel free to PM me. Shipping (http://zilvia.net/f/sale-items/351759-built-sr-partout.html#) is not included. I'll get pictures up upon request. This setup put down 360hp/315trq at the wheels on 13psi. Thanks for looking.
S14 bottom-end; Eagle rods, Je pistons, Cosworth main/rod bearings, ARP hardware(rods,mains,head), crankscraper & windage tray, comp was 135 across the board. Oil pressure was always at 20lbs at idle. This is a fresh short block, all brackets have been powdercoated. - Pending...
Greddy oil pan powdercoated Architectural Bronze- $300
PeakBoost T3 Turbo kit (http://zilvia.net/f/sale-items/351759-built-sr-partout.html#); manifold w/44mm v-band flange, downpipe, wastegate dump pipe. Manifold is HPC coated, down and dump pipe are heat wrapped. This is without the turbo. -$1200
GT3071R .64 T3 water/oil lines included, lines are for an S14 SR -$1200
S14 IM extrude-honed, 60mm TB w/ TPS, thermal gasket, new hoses. I'll include the IACV. IAT sensor port drilled/tapped behind TB, not included -$600
S14 VTC head, Supertech DVS, new valve seals, mild port. I'll include the powdercoated VC w/ -10an fittings for catch can setup for more cash. -$400
S14 Valve cover. Powdercoated Architectural Bronze. Has -10AN fittings for catch can setup. -$150
Toda cams 264* 10.5mm NVCS 5k miles -SOLD-
RPS clutch, Spec FW 20k miles has seen the drag strip multiple times -$250
Mazworx Z32 trans adapter kit w/ used trans $1200 or just bell housing, you send me a non-machined bellhousing to make a complete Z-trans -$950
Tomei oil block adapter -Pending...
ATI engine damper -$300
SARD 850cc injectors in S14 fuel rail w/ adapter to run fuel line to external FPR -$550
Haltech E8 w/ patch-loom for S14 and sensors, no harness. I'll include the LSx coil packs, custom (http://zilvia.net/f/sale-items/351759-built-sr-partout.html#) wires, and harness for an additional cash -$1100
S14 Nismo mounts $100
http://i627.photobucket.com/albums/tt352/jr_ss/Newengineshots005.jpg?t=1289344634
More pictures can be found here
S14 bottom-end; Eagle rods, Je pistons, Cosworth main/rod bearings, ARP hardware(rods,mains,head), crankscraper & windage tray, comp was 135 across the board. Oil pressure was always at 20lbs at idle. This is a fresh short block, all brackets have been powdercoated. - Pending...
Greddy oil pan powdercoated Architectural Bronze- $300
PeakBoost T3 Turbo kit (http://zilvia.net/f/sale-items/351759-built-sr-partout.html#); manifold w/44mm v-band flange, downpipe, wastegate dump pipe. Manifold is HPC coated, down and dump pipe are heat wrapped. This is without the turbo. -$1200
GT3071R .64 T3 water/oil lines included, lines are for an S14 SR -$1200
S14 IM extrude-honed, 60mm TB w/ TPS, thermal gasket, new hoses. I'll include the IACV. IAT sensor port drilled/tapped behind TB, not included -$600
S14 VTC head, Supertech DVS, new valve seals, mild port. I'll include the powdercoated VC w/ -10an fittings for catch can setup for more cash. -$400
S14 Valve cover. Powdercoated Architectural Bronze. Has -10AN fittings for catch can setup. -$150
Toda cams 264* 10.5mm NVCS 5k miles -SOLD-
RPS clutch, Spec FW 20k miles has seen the drag strip multiple times -$250
Mazworx Z32 trans adapter kit w/ used trans $1200 or just bell housing, you send me a non-machined bellhousing to make a complete Z-trans -$950
Tomei oil block adapter -Pending...
ATI engine damper -$300
SARD 850cc injectors in S14 fuel rail w/ adapter to run fuel line to external FPR -$550
Haltech E8 w/ patch-loom for S14 and sensors, no harness. I'll include the LSx coil packs, custom (http://zilvia.net/f/sale-items/351759-built-sr-partout.html#) wires, and harness for an additional cash -$1100
S14 Nismo mounts $100
http://i627.photobucket.com/albums/tt352/jr_ss/Newengineshots005.jpg?t=1289344634
More pictures can be found here