PDA

View Full Version : CA NRG, Nismo, ka-t parts & much more!


dRift_g0ddess
12-05-2010, 09:39 PM
NRG stainless radiator cooling panel for 1995-96 Zenki S14- $75 FIRM
BNIB never installed.. only set on the car (http://zilvia.net/f/sale-items/349714-s14-clean-zenki-headlights-gas-tank-ka-t-parts-much-more.html#) for picture. Still has white plastic protectant, never removed.

http://i4.photobucket.com/albums/y133/AlotLikeLove/ST830130.jpg

http://i4.photobucket.com/albums/y133/AlotLikeLove/ST830115.jpg


Stock S14 Front Brake setup- (4 lug) $100 obo
Incl rotors, calipers, lines and I think the pads are there too.
http://i4.photobucket.com/albums/y133/AlotLikeLove/before.jpg


OEM KA24de S14 fan shroud in very good condition, no broken tabs or cracks- $30
http://i4.photobucket.com/albums/y133/AlotLikeLove/IMG_00054.jpg
http://i4.photobucket.com/albums/y133/AlotLikeLove/IMG_00043.jpg

OEM KA24DE stock Electric AC fan incl good harness- $40
http://i4.photobucket.com/albums/y133/AlotLikeLove/IMG_0009.jpg
http://i4.photobucket.com/albums/y133/AlotLikeLove/IMG_00082.jpg

OEM KA24DE Fan clutch and blades- $40
Cleaned and buffed all blades :) Looks and works great.
http://i4.photobucket.com/albums/y133/AlotLikeLove/IMG_00073.jpg
http://i4.photobucket.com/albums/y133/AlotLikeLove/IMG_00062.jpg


S14 stock fuel pump- $20
http://i4.photobucket.com/albums/y133/AlotLikeLove/ST830001.jpg

S13 Emance ecu dyno tuned for ka-t.. I drove to Emance and had him personally dyno tune the ecu. made 280whp at 10psi with a t3/t4, 550cc inj, & n62 maf and minor adjustments with an safc neo. Includes ecu and conversion harness for s14 -$300 firm.

I also have a set of 550cc Deatschwerks injectors, had them flow matched and tested (I have the sheet with numbers to prove)-$250 firm. SOLDSOLDSOLD!!

http://i4.photobucket.com/albums/y133/AlotLikeLove/ST830374-1.jpg



Stock S14 Zenki amber side markers- $20
http://i4.photobucket.com/albums/y133/AlotLikeLove/ST830258.jpg


Ka24de top mount cast iron manifold new style flanged for a t3 OR t4 turbo-$90 SOLDSOLDSOLD!!
NEVER used and NEVER installed. 38mm external wastegate flange. This style (http://zilvia.net/f/sale-items/349714-s14-clean-zenki-headlights-gas-tank-ka-t-parts-much-more.html#) sits the turbo further away from the bmc for better clearance..which is a hugee pain in the ass if you use a normal manifold. NO heat shields, NO sock covers and NO boiling your brake fluid with this one :D
http://i4.photobucket.com/albums/y133/AlotLikeLove/mani.jpg
Good clearance
http://i4.photobucket.com/albums/y133/AlotLikeLove/ST8300032.jpg




New Oil cap- $8
http://i4.photobucket.com/albums/y133/AlotLikeLove/cap2.jpg
http://i4.photobucket.com/albums/y133/AlotLikeLove/cap.jpg


Turbo intake pipe with welded 5/8 bung (for valve cover breather) and 19mm-3/4 bung for recirc of bov- $25 FILTER NOT INCLUDED.
http://i4.photobucket.com/albums/y133/AlotLikeLove/ST830884.jpg

2.5" V-band clamp with ss flanges -$25
only used the clamp for almost a week in attempt to seal an exhaust leak..had to rebuild dump pipe instead. V-band flanges haven't been touched. Still in perfect condition.
http://i4.photobucket.com/albums/y133/AlotLikeLove/clamp2.jpg



Stock s14 front sway- $10
http://i4.photobucket.com/albums/y133/AlotLikeLove/sway.jpg


Four Bronze 8-spoke DLX Hype 4x114.3 18x7.5-
includes ONE good Falken tire -$400
http://i4.photobucket.com/albums/y133/AlotLikeLove/ST830883.jpg
http://i4.photobucket.com/albums/y133/AlotLikeLove/wheel.jpg


*Also have various stock suspension arms- $20 per set



Thanks for looking! ;)
Please pm for quick response or txt 909 720 2419

KOUKIboy
12-05-2010, 10:07 PM
Hi how much for the clutch line and the 14" steel braided line shipped to Phoenix AZ 85033...Thanks......

JonathanPrem
12-06-2010, 06:58 AM
Sent you Pm for the Ecu and might be interested in the tubro intake tube

ov1989
12-06-2010, 05:48 PM
kinda want those wheels...hmmm

newlovekid
12-06-2010, 11:29 PM
ill pick up the shift knob, i dont live that far from you... hit me up 909 993 3203

Datsun_280zx
12-07-2010, 08:43 PM
30 shipped for the knob? If so LMK interested. thanks!

dRift_g0ddess
12-08-2010, 08:58 AM
Nismo shift knob is Sold!! :)

smokin18
12-08-2010, 09:05 AM
i c a few things i want and need

dRift_g0ddess
12-13-2010, 08:16 PM
Buy my stuff I need money for christmas presents :]

Drift_86
12-13-2010, 11:31 PM
how much of a drop r dose lowering springs?

no slide
12-14-2010, 12:57 AM
i pm'd you about the springs. lmk

nismoninjagtr
12-17-2010, 09:28 AM
just testing the waters... how much for injectors shipped to 45426?

dRift_g0ddess
12-17-2010, 12:18 PM
just testing the waters... how much for injectors shipped to 45426?
Pm sent.


Sale pending on springs :)

sr20time
12-17-2010, 12:27 PM
how much for injectors shipped. how are the o-rings how many miles?

dRift_g0ddess
12-17-2010, 02:40 PM
how much for injectors shipped. how are the o-rings how many miles?

I can ship the injectors anywhere for $4.95 via usps.. im not trying to jack anyone lol

Injectors have less than 1500 miles on them, and o-rings are NEW, be sure to lube before install though. I have a pretty recent flow sheet from Deatschwerks, I sent them in and paid to have them tested and matched. One was burnt out so they replaced it with a brand new inj, the sheet tells you which one is which. They work perfect, I don't sell broke sh!t.. see trader rating ;)

dRift_g0ddess
12-28-2010, 02:06 PM
Updated..got some new sh!t for salee :]