racepar1
12-02-2010, 03:00 PM
FRESHLY MACHINED stock SR flywheel
This is a stock SR20DET flywheel that has been freshly machined. Judging by the wear and the clutch that came on it I'm pretty sure this is the first time it's been machined as well. It's in great shape, no rust ot any other damage...
$40
http://i275.photobucket.com/albums/jj283/racepar1/evenmorefs015.jpg
http://i275.photobucket.com/albums/jj283/racepar1/newbuild025.jpg
CLEAN SR20DET coilpack harness
The harness is in good condition. All connectors are in good shape and it is completely un-cut.
$20
http://i275.photobucket.com/albums/jj283/racepar1/newbuild026.jpg
SR20DET coolant temp sensor subharness
This is the subharness that plugs into the main engine harness and goes to the engine coolant temp sensor and the coolant guage sender. It's in good condition, no damage.
$10
http://i275.photobucket.com/albums/jj283/racepar1/morecrap014.jpg
Automoter "sport comp" water temp guage
This is an Autometer "sport comp" mechanical water temperature guage. The guage is lighted and is in good working condition...
SOLD!
Z-32 MAF adapter
This is an "r-tec" brand MAF adapter for a Z-32 MAF sensor. It's a pretty nice piece, one-piece billet with threaded holes. I'll measure the air filter size asap...
SOLD!
S-13 powersteering hardline assembly
This is the power steering hardline assembly from a DOHC (kade) s13 240sx. It is the complete assembly including all brackets and clips and both hardlines only. I do not have the rubber hose section or the pressure switch unfortuanetly. Those can be sourced new at your local auto parts store or used here of course. The lines and brackets are in good shape no damage at all as far as I can tell.
TRASHED...
Chuki bumper grilles
The grilles are in pretty good shape, nothing but minor knicks. The screws are included with the grilles, but unfortuanetly I don't have the screw clips.
$10
http://i275.photobucket.com/albums/jj283/racepar1/annabella035.jpg
S-13 pop-up light shrouds
The shrouds are not in perfect condition, they do have some large scuffs on them. They are not cracked though and fit and function perfectly.
$10
http://i275.photobucket.com/albums/jj283/racepar1/annabella018.jpg
Cheap s13 steering wheel hub
This is a no-name brand hub. Unfortuanetly I do not have the plastic cover for it. Also the wire for the horn is broken off. It is otherwise completely functional and the turn signal works properly.
$5
http://i275.photobucket.com/albums/jj283/racepar1/annabella015.jpg
http://i275.photobucket.com/albums/jj283/racepar1/annabella016.jpg
S-13 radio brackets w/beat up din pocket
The radio brackets are in good shape and the din pocket is useable, it's just not that pretty. The main reason that I'm even including it is because it keeps the screws from getting lost. Unfortuanetly I do not have the special screws for the radio though...
SOLD!
S-13 sidemarker lights
This is a full set of clean sidemarker lights for an s13. The harnesses and bulbs are included...
SOLD!
ENKEI NT03+M's, 17x9.5 +38 5x114.3
This is a full set of 17" X 9.5", +38 offset, 5x114.3, Enkei NT03+M's. There is little to no rash (on the raw wheels pre-powdercoat) whatsoever on these things, they're very clean.
The wheels are freshly powdercoated bronze and the centercaps (all 4 included) are freshly powdercoated flat black. The powdercoat isn't quite perfect, it has some very minor flaws, but it looks very good. NONE of the imperfections that I noticed are visible in any of the pics. You would have to see the wheels in person and inspect them very closely to notice anything. I'm kind of a perfectionist... The wheels are kinda dusty in the pics and they do not do the bronze any justice at all. It's way deeper, darker, and sexier in person.
Due to a malfunction on the tire machine two of the wheels are scratched on the very top of the outer lip, this is pretty much un-noticeable with the tires (http://zilvia.net/f/#) mounted however as it is under the bead protector.
NO LONGER FOR SALE!!!
S-14 subframe
The subframe is in good condition, no bends, no damage. It is completely bare and the bushings have been removed. This is perfect for an s-14 owner looking to upgrade his subframe bushings or an s-13 owner that wants to upgrade to the s-14 subframe. I will include a set of s-14 rear LCA's, upper arms, and toe arms with the subframe as well...
SOLD!
This is a stock SR20DET flywheel that has been freshly machined. Judging by the wear and the clutch that came on it I'm pretty sure this is the first time it's been machined as well. It's in great shape, no rust ot any other damage...
$40
http://i275.photobucket.com/albums/jj283/racepar1/evenmorefs015.jpg
http://i275.photobucket.com/albums/jj283/racepar1/newbuild025.jpg
CLEAN SR20DET coilpack harness
The harness is in good condition. All connectors are in good shape and it is completely un-cut.
$20
http://i275.photobucket.com/albums/jj283/racepar1/newbuild026.jpg
SR20DET coolant temp sensor subharness
This is the subharness that plugs into the main engine harness and goes to the engine coolant temp sensor and the coolant guage sender. It's in good condition, no damage.
$10
http://i275.photobucket.com/albums/jj283/racepar1/morecrap014.jpg
Automoter "sport comp" water temp guage
This is an Autometer "sport comp" mechanical water temperature guage. The guage is lighted and is in good working condition...
SOLD!
Z-32 MAF adapter
This is an "r-tec" brand MAF adapter for a Z-32 MAF sensor. It's a pretty nice piece, one-piece billet with threaded holes. I'll measure the air filter size asap...
SOLD!
S-13 powersteering hardline assembly
This is the power steering hardline assembly from a DOHC (kade) s13 240sx. It is the complete assembly including all brackets and clips and both hardlines only. I do not have the rubber hose section or the pressure switch unfortuanetly. Those can be sourced new at your local auto parts store or used here of course. The lines and brackets are in good shape no damage at all as far as I can tell.
TRASHED...
Chuki bumper grilles
The grilles are in pretty good shape, nothing but minor knicks. The screws are included with the grilles, but unfortuanetly I don't have the screw clips.
$10
http://i275.photobucket.com/albums/jj283/racepar1/annabella035.jpg
S-13 pop-up light shrouds
The shrouds are not in perfect condition, they do have some large scuffs on them. They are not cracked though and fit and function perfectly.
$10
http://i275.photobucket.com/albums/jj283/racepar1/annabella018.jpg
Cheap s13 steering wheel hub
This is a no-name brand hub. Unfortuanetly I do not have the plastic cover for it. Also the wire for the horn is broken off. It is otherwise completely functional and the turn signal works properly.
$5
http://i275.photobucket.com/albums/jj283/racepar1/annabella015.jpg
http://i275.photobucket.com/albums/jj283/racepar1/annabella016.jpg
S-13 radio brackets w/beat up din pocket
The radio brackets are in good shape and the din pocket is useable, it's just not that pretty. The main reason that I'm even including it is because it keeps the screws from getting lost. Unfortuanetly I do not have the special screws for the radio though...
SOLD!
S-13 sidemarker lights
This is a full set of clean sidemarker lights for an s13. The harnesses and bulbs are included...
SOLD!
ENKEI NT03+M's, 17x9.5 +38 5x114.3
This is a full set of 17" X 9.5", +38 offset, 5x114.3, Enkei NT03+M's. There is little to no rash (on the raw wheels pre-powdercoat) whatsoever on these things, they're very clean.
The wheels are freshly powdercoated bronze and the centercaps (all 4 included) are freshly powdercoated flat black. The powdercoat isn't quite perfect, it has some very minor flaws, but it looks very good. NONE of the imperfections that I noticed are visible in any of the pics. You would have to see the wheels in person and inspect them very closely to notice anything. I'm kind of a perfectionist... The wheels are kinda dusty in the pics and they do not do the bronze any justice at all. It's way deeper, darker, and sexier in person.
Due to a malfunction on the tire machine two of the wheels are scratched on the very top of the outer lip, this is pretty much un-noticeable with the tires (http://zilvia.net/f/#) mounted however as it is under the bead protector.
NO LONGER FOR SALE!!!
S-14 subframe
The subframe is in good condition, no bends, no damage. It is completely bare and the bushings have been removed. This is perfect for an s-14 owner looking to upgrade his subframe bushings or an s-13 owner that wants to upgrade to the s-14 subframe. I will include a set of s-14 rear LCA's, upper arms, and toe arms with the subframe as well...
SOLD!