s13me
11-30-2010, 07:55 PM
Hey, I'm selling my Ca18det, I don't have time to mess with it anymore. I originally purchased this motor set for 1299.00 from JHOT in Augusta,GA in 2006. I got the CA to be a little different then most 240sx owners. After doing much research I found that the Ca18 had a lot of potential, my plans changed ! I decided to build it for a 350 horsepower range. Over time i pulled the engine and rebuilt it with forged internals thanks to Southern Imports in Murfreesboro. I currently drive the car roughly two days a week, I just don't have time to finish it. As it sits it runs a tad bit rich due to the injectors and mafs. The motor has roughly 10k miles on the rebuild. All this motor needs is some tuning time! Below I will list what has been done to it, I'm sure I will forget something.I can provide many receipts for the parts. If you have any questions or need more pictures please feel free to ask. I can be reached at [email protected] or text me at 615-406-zero one
two four.Thank you for your time.
Bottem End
CP pistons .20 - 589.00
OEM rod bearings - 60.00
OEM main bearings - 45.00
Machine Work (bored .20 , decked and cleaned ) - 220.00
Head/etc
OEM gasket kit - 200.00
Evo 560cc injectors - 100.00
N62 z32 MAFS - 90.00
ARP Headstuds - 98.00
T3/T4 Manifold - 80.00
Nistune Type 1 board - 220.00
http://i998.photobucket.com/albums/af108/dmhca18/DSC00044.jpg
http://i998.photobucket.com/albums/af108/dmhca18/DSC00288.jpg
http://i998.photobucket.com/albums/af108/dmhca18/DSC00287.jpg
two four.Thank you for your time.
Bottem End
CP pistons .20 - 589.00
OEM rod bearings - 60.00
OEM main bearings - 45.00
Machine Work (bored .20 , decked and cleaned ) - 220.00
Head/etc
OEM gasket kit - 200.00
Evo 560cc injectors - 100.00
N62 z32 MAFS - 90.00
ARP Headstuds - 98.00
T3/T4 Manifold - 80.00
Nistune Type 1 board - 220.00
http://i998.photobucket.com/albums/af108/dmhca18/DSC00044.jpg
http://i998.photobucket.com/albums/af108/dmhca18/DSC00288.jpg
http://i998.photobucket.com/albums/af108/dmhca18/DSC00287.jpg