racepar1
11-29-2010, 12:03 PM
FRESHLY MACHINED stock SR flywheel
This is a stock SR20DET flywheel that has been freshly machined. Judging by the wear and the clutch that came on it I'm pretty sure this is the first time it's been machined as well. It's in great shape, no rust ot any other damage...
$40
http://i275.photobucket.com/albums/jj283/racepar1/evenmorefs015.jpg
http://i275.photobucket.com/albums/jj283/racepar1/newbuild025.jpg
SR20DET ignitor
It is off a redtop sr20det engine, in good working condition, no damage.
$25
http://i275.photobucket.com/albums/jj283/racepar1/centercaps001.jpg
CLEAN SR20DET coilpack harness
The harness is in good condition. All connectors are in good shape and it is completely un-cut.
$20
http://i275.photobucket.com/albums/jj283/racepar1/newbuild026.jpg
SR20DET coolant temp sensor subharness
This is the subharness that plugs into the main engine harness and goes to the engine coolant temp sensor and the coolant guage sender. It's in good condition, no damage.
$10
http://i275.photobucket.com/albums/jj283/racepar1/morecrap014.jpg
Automoter "sport comp" water temp guage
This is an Autometer "sport comp" mechanical water temperature guage. The guage is lighted and is in good working condition...
$30
http://i275.photobucket.com/albums/jj283/racepar1/morecarstuff003.jpg
http://i275.photobucket.com/albums/jj283/racepar1/morecarstuff004.jpg
Z-32 MAF adapter
This is an "r-tec" brand MAF adapter for a Z-32 MAF sensor. It's a pretty nice piece, one-piece billet with threaded holes. I'll measure the air filter size asap...
$25
http://i275.photobucket.com/albums/jj283/racepar1/shoesandmaf001.jpg
http://i275.photobucket.com/albums/jj283/racepar1/shoesandmaf002.jpg
http://i275.photobucket.com/albums/jj283/racepar1/shoesandmaf003.jpg
S-13 powersteering hardline assembly
This is the power steering hardline assembly from a DOHC (kade) s13 240sx. It is the complete assembly including all brackets and clips and both hardlines only. I do not have the rubber hose section or the pressure switch unfortuanetly. Those can be sourced new at your local auto parts store or used here of course. The lines and brackets are in good shape no damage at all as far as I can tell.
$20
http://i275.photobucket.com/albums/jj283/racepar1/morecrap022.jpg
Chuki bumper grilles
The grilles are in pretty good shape, nothing but minor knicks. The screws are included with the grilles, but unfortuanetly I don't have the screw clips.
$10
http://i275.photobucket.com/albums/jj283/racepar1/annabella035.jpg
S-13 pop-up light shrouds
The shrouds are not in perfect condition, they do have some large scuffs on them. They are not cracked though and fit and function perfectly.
$10
http://i275.photobucket.com/albums/jj283/racepar1/annabella018.jpg
Cheap s13 steering wheel hub
This is a no-name brand hub. Unfortuanetly I do not have the plastic cover for it. Also the wire for the horn is broken off. It is otherwise completely functional and the turn signal works properly.
$5
http://i275.photobucket.com/albums/jj283/racepar1/annabella015.jpg
http://i275.photobucket.com/albums/jj283/racepar1/annabella016.jpg
S-13 radio brackets w/beat up din pocket
The radio brackets are in good shape and the din pocket is useable, it's just not that pretty. The main reason that I'm even including it is because it keeps the screws from getting lost. Unfortuanetly I do not have the special screws for the radio though...
$5
http://i275.photobucket.com/albums/jj283/racepar1/annabella025.jpg
S-13 sidemarker lights
This is a full set of clean sidemarker lights for an s13. The harnesses and bulbs are included...
ONLY the passenger's side front light is left, all others SOLD!
$5 each light
http://i275.photobucket.com/albums/jj283/racepar1/annabella021.jpg
ENKEI NT03+M's, 17x9.5 +38 5x114.3
This is a full set of 17" X 9.5", +38 offset, 5x114.3, Enkei NT03+M's. There is little to no rash (on the raw wheels pre-powdercoat) whatsoever on these things, they're very clean.
The wheels are freshly powdercoated bronze and the centercaps (all 4 included) are freshly powdercoated flat black. The powdercoat isn't quite perfect, it has some very minor flaws, but it looks very good. NONE of the imperfections that I noticed are visible in any of the pics. You would have to see the wheels in person and inspect them very closely to notice anything. I'm kind of a perfectionist... The wheels are kinda dusty in the pics and they do not do the bronze any justice at all. It's way deeper, darker, and sexier in person.
Due to a malfunction on the tire machine two of the wheels are scratched on the very top of the outer lip, this is pretty much un-noticeable with the tires (http://zilvia.net/f/#) mounted however as it is under the bead protector.
Mounted on the wheels are a set of 245/45/17 Bridgestone RE01R's with 90% treadlife left. I purchased (http://zilvia.net/f/#) these tires brand new in 2009 for the redline time attack and they've been stored indoors since. The tires are also available separately...
Wheels ALONE:
$800
Wheels W/TIRES:
$980
Tires ALONE:
$200
WHEEL TRADES:
I might be interested in trading for other wheels, but I'm really not looking to put cash on top right now though. Any wheels to be considered must be at least 17x9 +20 to +30 offset and 5x114.3, or low offset 4x100 w/tires for my BMW E30...
WHEEL 1
http://i275.photobucket.com/albums/jj283/racepar1/evenmorefs005.jpg
WHEEL 2
http://i275.photobucket.com/albums/jj283/racepar1/evenmorefs006.jpg
WHEEL 3
http://i275.photobucket.com/albums/jj283/racepar1/evenmorefs007.jpg
WHEEL 4
http://i275.photobucket.com/albums/jj283/racepar1/evenmorefs008.jpg
ON-CAR
http://i275.photobucket.com/albums/jj283/racepar1/evenmorefs009.jpg
FRONT FITMENT W/15MM SPACERS TO CLEAR COILOVERS (other newer coils will need less spacing to clear)
http://i275.photobucket.com/albums/jj283/racepar1/evenmorefs011.jpg
REAR FITMENT W/5MM SPACERS
http://i275.photobucket.com/albums/jj283/racepar1/evenmorefs010.jpg
TIRES...
http://i275.photobucket.com/albums/jj283/racepar1/nt03013.jpg
S-14 subframe
The subframe is in good condition, no bends, no damage. It is completely bare and the bushings have been removed. This is perfect for an s-14 owner looking to upgrade his subframe bushings or an s-13 owner that wants to upgrade to the s-14 subframe. I will include a set of s-14 rear LCA's, upper arms, and toe arms with the subframe as well...
$40
5150Fab rear "trunkbrace"
This is a 4-point rear strut/trunk brace for an s-13 coupe or fastback. It was mads and originally sold by "5150Fab" here and is of pretty nice quality. Unfortuanetly I don't have pictures of my brace at the moment, but posted below are pics from the original F/S thread. Mine is not damaged in any way and is complete, but could use a fresh coat of paint.
SOLD!
This is a stock SR20DET flywheel that has been freshly machined. Judging by the wear and the clutch that came on it I'm pretty sure this is the first time it's been machined as well. It's in great shape, no rust ot any other damage...
$40
http://i275.photobucket.com/albums/jj283/racepar1/evenmorefs015.jpg
http://i275.photobucket.com/albums/jj283/racepar1/newbuild025.jpg
SR20DET ignitor
It is off a redtop sr20det engine, in good working condition, no damage.
$25
http://i275.photobucket.com/albums/jj283/racepar1/centercaps001.jpg
CLEAN SR20DET coilpack harness
The harness is in good condition. All connectors are in good shape and it is completely un-cut.
$20
http://i275.photobucket.com/albums/jj283/racepar1/newbuild026.jpg
SR20DET coolant temp sensor subharness
This is the subharness that plugs into the main engine harness and goes to the engine coolant temp sensor and the coolant guage sender. It's in good condition, no damage.
$10
http://i275.photobucket.com/albums/jj283/racepar1/morecrap014.jpg
Automoter "sport comp" water temp guage
This is an Autometer "sport comp" mechanical water temperature guage. The guage is lighted and is in good working condition...
$30
http://i275.photobucket.com/albums/jj283/racepar1/morecarstuff003.jpg
http://i275.photobucket.com/albums/jj283/racepar1/morecarstuff004.jpg
Z-32 MAF adapter
This is an "r-tec" brand MAF adapter for a Z-32 MAF sensor. It's a pretty nice piece, one-piece billet with threaded holes. I'll measure the air filter size asap...
$25
http://i275.photobucket.com/albums/jj283/racepar1/shoesandmaf001.jpg
http://i275.photobucket.com/albums/jj283/racepar1/shoesandmaf002.jpg
http://i275.photobucket.com/albums/jj283/racepar1/shoesandmaf003.jpg
S-13 powersteering hardline assembly
This is the power steering hardline assembly from a DOHC (kade) s13 240sx. It is the complete assembly including all brackets and clips and both hardlines only. I do not have the rubber hose section or the pressure switch unfortuanetly. Those can be sourced new at your local auto parts store or used here of course. The lines and brackets are in good shape no damage at all as far as I can tell.
$20
http://i275.photobucket.com/albums/jj283/racepar1/morecrap022.jpg
Chuki bumper grilles
The grilles are in pretty good shape, nothing but minor knicks. The screws are included with the grilles, but unfortuanetly I don't have the screw clips.
$10
http://i275.photobucket.com/albums/jj283/racepar1/annabella035.jpg
S-13 pop-up light shrouds
The shrouds are not in perfect condition, they do have some large scuffs on them. They are not cracked though and fit and function perfectly.
$10
http://i275.photobucket.com/albums/jj283/racepar1/annabella018.jpg
Cheap s13 steering wheel hub
This is a no-name brand hub. Unfortuanetly I do not have the plastic cover for it. Also the wire for the horn is broken off. It is otherwise completely functional and the turn signal works properly.
$5
http://i275.photobucket.com/albums/jj283/racepar1/annabella015.jpg
http://i275.photobucket.com/albums/jj283/racepar1/annabella016.jpg
S-13 radio brackets w/beat up din pocket
The radio brackets are in good shape and the din pocket is useable, it's just not that pretty. The main reason that I'm even including it is because it keeps the screws from getting lost. Unfortuanetly I do not have the special screws for the radio though...
$5
http://i275.photobucket.com/albums/jj283/racepar1/annabella025.jpg
S-13 sidemarker lights
This is a full set of clean sidemarker lights for an s13. The harnesses and bulbs are included...
ONLY the passenger's side front light is left, all others SOLD!
$5 each light
http://i275.photobucket.com/albums/jj283/racepar1/annabella021.jpg
ENKEI NT03+M's, 17x9.5 +38 5x114.3
This is a full set of 17" X 9.5", +38 offset, 5x114.3, Enkei NT03+M's. There is little to no rash (on the raw wheels pre-powdercoat) whatsoever on these things, they're very clean.
The wheels are freshly powdercoated bronze and the centercaps (all 4 included) are freshly powdercoated flat black. The powdercoat isn't quite perfect, it has some very minor flaws, but it looks very good. NONE of the imperfections that I noticed are visible in any of the pics. You would have to see the wheels in person and inspect them very closely to notice anything. I'm kind of a perfectionist... The wheels are kinda dusty in the pics and they do not do the bronze any justice at all. It's way deeper, darker, and sexier in person.
Due to a malfunction on the tire machine two of the wheels are scratched on the very top of the outer lip, this is pretty much un-noticeable with the tires (http://zilvia.net/f/#) mounted however as it is under the bead protector.
Mounted on the wheels are a set of 245/45/17 Bridgestone RE01R's with 90% treadlife left. I purchased (http://zilvia.net/f/#) these tires brand new in 2009 for the redline time attack and they've been stored indoors since. The tires are also available separately...
Wheels ALONE:
$800
Wheels W/TIRES:
$980
Tires ALONE:
$200
WHEEL TRADES:
I might be interested in trading for other wheels, but I'm really not looking to put cash on top right now though. Any wheels to be considered must be at least 17x9 +20 to +30 offset and 5x114.3, or low offset 4x100 w/tires for my BMW E30...
WHEEL 1
http://i275.photobucket.com/albums/jj283/racepar1/evenmorefs005.jpg
WHEEL 2
http://i275.photobucket.com/albums/jj283/racepar1/evenmorefs006.jpg
WHEEL 3
http://i275.photobucket.com/albums/jj283/racepar1/evenmorefs007.jpg
WHEEL 4
http://i275.photobucket.com/albums/jj283/racepar1/evenmorefs008.jpg
ON-CAR
http://i275.photobucket.com/albums/jj283/racepar1/evenmorefs009.jpg
FRONT FITMENT W/15MM SPACERS TO CLEAR COILOVERS (other newer coils will need less spacing to clear)
http://i275.photobucket.com/albums/jj283/racepar1/evenmorefs011.jpg
REAR FITMENT W/5MM SPACERS
http://i275.photobucket.com/albums/jj283/racepar1/evenmorefs010.jpg
TIRES...
http://i275.photobucket.com/albums/jj283/racepar1/nt03013.jpg
S-14 subframe
The subframe is in good condition, no bends, no damage. It is completely bare and the bushings have been removed. This is perfect for an s-14 owner looking to upgrade his subframe bushings or an s-13 owner that wants to upgrade to the s-14 subframe. I will include a set of s-14 rear LCA's, upper arms, and toe arms with the subframe as well...
$40
5150Fab rear "trunkbrace"
This is a 4-point rear strut/trunk brace for an s-13 coupe or fastback. It was mads and originally sold by "5150Fab" here and is of pretty nice quality. Unfortuanetly I don't have pictures of my brace at the moment, but posted below are pics from the original F/S thread. Mine is not damaged in any way and is complete, but could use a fresh coat of paint.
SOLD!