Subaru2.5RSTI
11-29-2010, 12:16 AM
Hey wassup Zilvia, i i found a great deal on a STI so im fully parting out my 240sx YAY! so here goes the part out thread. I have other posts with bnib parts, look out for them.
Package will include engine. trans . clutch. ecu. wiring harness pre wired to an s13. ecu. turbo. stock sr20 down pipe. all hoses .ignitor chip. maf. everything for it to be plug and play.
My price is 2500 obo. the swap its self is 3000 and you dont know where those jdm engines have been.
CALL OR TEXT at 661-886-5395 for a faster response or any questions or pms also.
Sr20 Black top swap Rebuilt in OEM spec, i rebuilt it just so i had something reliable. there was nothing wrong with it when i bought it , its never seen any damage. used only nissan parts and nissan gaskets to rebuild it. I have the recipts for everything. i bought all the parts from FRsport. the machine work was done here in san diego and yes i did use a honing plate this engine runs perfect and has never had one problem. i drive to LA from san diego (3hr drive) about every weekend. ive put about 4k miles on the engine so far and the clutch. i use only royal purple 10w30 and i only use redline trans fluid. this engine is perfect for someone that wants something that will last them forever. it comes with everything stock i tried not to put any aftermarket items on it so it kept its reliability.
Everything was done once and was done right. all the gauges work in my s13. doesnt search for idle. boosts perfect. doesnt run rich. doesnt smoke its litterally perfect. a couple people on zilvia can attest on how good it runs. I dont have any videos of it running bc my camera doesnt take vid sorry.
the engine is still in the car and you can test drive it, im removing it next weeks so hurry.
Sr20 Blacktop Later model With cooling Fins.
ALL THE BELOW LISTED WERE BRAND NEW ITEMS!!
nissan Piston rings
nissan c clips
nissan bearings
upgraded s14 water pump
upgraded s14 oil pickup
upgraded timing chain with steel tensioner
nissan oil pump
All nissan seals and gaskets
nissan iacv
nissan tps
gates belts
nissan knock sensor
nissan temp sensor
nissan pcv valve
nissan radiator hoses (lower and upper)
nissan o2 sensor (fat type)
nismo thermostat
nissan power steering pump
nissan slave cylinder
exedy stage 2 clutch
nissan flywheel bolts
Ngk Stock heat range plugs
http://i16.photobucket.com/albums/b29/naruto65d/DSC_0406.jpg
http://i16.photobucket.com/albums/b29/naruto65d/DSC_0408.jpg
http://i16.photobucket.com/albums/b29/naruto65d/DSC_0412.jpg
http://i16.photobucket.com/albums/b29/naruto65d/DSC_0411.jpg
http://i16.photobucket.com/albums/b29/naruto65d/DSC_0414.jpg
http://i16.photobucket.com/albums/b29/naruto65d/DSC_0407.jpg
http://i16.photobucket.com/albums/b29/naruto65d/DSC_0422.jpg
http://i16.photobucket.com/albums/b29/naruto65d/DSC_0426.jpg
started first thing in the morning the idle is so high bc its cold(as you can see on the temp gauge)No cels and everything works.
I also have a koyo radiator. new clutch master cylinder. altima fans. PBM high mount inter cooler setup. also for sale. everything listed in the pics are for sale.
Package will include engine. trans . clutch. ecu. wiring harness pre wired to an s13. ecu. turbo. stock sr20 down pipe. all hoses .ignitor chip. maf. everything for it to be plug and play.
My price is 2500 obo. the swap its self is 3000 and you dont know where those jdm engines have been.
CALL OR TEXT at 661-886-5395 for a faster response or any questions or pms also.
Sr20 Black top swap Rebuilt in OEM spec, i rebuilt it just so i had something reliable. there was nothing wrong with it when i bought it , its never seen any damage. used only nissan parts and nissan gaskets to rebuild it. I have the recipts for everything. i bought all the parts from FRsport. the machine work was done here in san diego and yes i did use a honing plate this engine runs perfect and has never had one problem. i drive to LA from san diego (3hr drive) about every weekend. ive put about 4k miles on the engine so far and the clutch. i use only royal purple 10w30 and i only use redline trans fluid. this engine is perfect for someone that wants something that will last them forever. it comes with everything stock i tried not to put any aftermarket items on it so it kept its reliability.
Everything was done once and was done right. all the gauges work in my s13. doesnt search for idle. boosts perfect. doesnt run rich. doesnt smoke its litterally perfect. a couple people on zilvia can attest on how good it runs. I dont have any videos of it running bc my camera doesnt take vid sorry.
the engine is still in the car and you can test drive it, im removing it next weeks so hurry.
Sr20 Blacktop Later model With cooling Fins.
ALL THE BELOW LISTED WERE BRAND NEW ITEMS!!
nissan Piston rings
nissan c clips
nissan bearings
upgraded s14 water pump
upgraded s14 oil pickup
upgraded timing chain with steel tensioner
nissan oil pump
All nissan seals and gaskets
nissan iacv
nissan tps
gates belts
nissan knock sensor
nissan temp sensor
nissan pcv valve
nissan radiator hoses (lower and upper)
nissan o2 sensor (fat type)
nismo thermostat
nissan power steering pump
nissan slave cylinder
exedy stage 2 clutch
nissan flywheel bolts
Ngk Stock heat range plugs
http://i16.photobucket.com/albums/b29/naruto65d/DSC_0406.jpg
http://i16.photobucket.com/albums/b29/naruto65d/DSC_0408.jpg
http://i16.photobucket.com/albums/b29/naruto65d/DSC_0412.jpg
http://i16.photobucket.com/albums/b29/naruto65d/DSC_0411.jpg
http://i16.photobucket.com/albums/b29/naruto65d/DSC_0414.jpg
http://i16.photobucket.com/albums/b29/naruto65d/DSC_0407.jpg
http://i16.photobucket.com/albums/b29/naruto65d/DSC_0422.jpg
http://i16.photobucket.com/albums/b29/naruto65d/DSC_0426.jpg
started first thing in the morning the idle is so high bc its cold(as you can see on the temp gauge)No cels and everything works.
I also have a koyo radiator. new clutch master cylinder. altima fans. PBM high mount inter cooler setup. also for sale. everything listed in the pics are for sale.