PDA

View Full Version : CA 1992 240sx hatch 5spd socal z32 brakes 4.4:1 vlsd kw suspension socal $4000


macidcrook
11-27-2010, 04:38 PM
I will not part out please DO NOT ask.


1992 Nissan 240sx SE White
214k miles
KA24DE
5spd, power windows, moon roof, spoiler
Kw V2 double adjustable coil overs
Z32 300zx NA brake calipers
z32 300zx brake master cylinder
Cryo treated Stoptech rotors front and rear
Cryo treated axxis ultimate brake pads front and rear
SPL front and rear stainless steel brake lines
Circuit sports 5 lug conversion
R32 4.4:1 Vlsd differential with extra cooling cover
Yokohama AVS 17” wheels +25front +15 rear
dunlop direzza Z1 tires 215/45/17 front 235/40/17 rears
new factory cap, rotor, spark plugs, spark plug wires, clutch slave and master.

The car runs great and shifts perfect absolutely nothing wrong mechanically and is very light. Car was originally to be built for the MPTCC race series but due to sponsors backing out, I am forced to abandon this project. The car has been stripped and 95% of the sound deadening has been removed. The wiring harness from the rear of the car to the dash board has been stripped of all unnecessary wires. Front windows still operational. All components except for the heater core have been removed behind the dash. Door panels, center console, shifter bezel, gauge cluster, gauge bezel, and uncracked dash are still in the car and installed. I have but there are not installed is the passenger seat, glove box and trunk panels. Comes with other misc interior pieces that were behind the dash. Car also comes with a carbon fiber racing seat and mount for the passenger side and a set of racing harness'. This will be a great project for some one to finish up, Or a good weekend warrior. I will not part out so dont waste your time. im ask $4000

NOTE!!! I drove the car he car the other day to warm it up and it had a missfire. Found out it was a cracked head so I have repaired it. This is kind of a normal problem for DE ka's but it has now been fixed and runs great
New parts installed with head fix:
Oem refurbished head
Mild exhaust porting
Oem timing chains
Oem chain guides
Oem chain tensioner
Oem head bolts
Oem headgasket
Oem valve guides
Oem valve stem seals
All other gaskets and sealant are oem too


http://i152.photobucket.com/albums/s181/macidcrook/touge%20s13/s134.jpg
http://i152.photobucket.com/albums/s181/macidcrook/touge%20s13/IMG_0167.jpg
http://i152.photobucket.com/albums/s181/macidcrook/touge%20s13/IMG_0172.jpg
http://i152.photobucket.com/albums/s181/macidcrook/touge%20s13/IMG_3244.jpg
http://i152.photobucket.com/albums/s181/macidcrook/touge%20s13/IMG_3245.jpg
http://i152.photobucket.com/albums/s181/macidcrook/touge%20s13/IMG_3253.jpg
http://i152.photobucket.com/albums/s181/macidcrook/touge%20s13/IMG_3251.jpg
http://i152.photobucket.com/albums/s181/macidcrook/touge%20s13/IMG_3247.jpg
http://i152.photobucket.com/albums/s181/macidcrook/touge%20s13/IMG_3242.jpg
http://i152.photobucket.com/albums/s181/macidcrook/touge%20s13/s133.jpg

please PM if interested

macidcrook
12-02-2010, 10:08 PM
bumpity #1

macidcrook
12-12-2010, 10:54 AM
bump bump bump

SteezyWonder
12-13-2010, 03:49 PM
yo im gna be coming into some money soon and im interested but 4k is a little high for a 13 especially with 200k. pm me if interested